Tale of Two Tables
George Colonel's Workshop-Havertown PA
Good Afternoon Friends,
My #2 son Eddie has gotten into woodworking, and has completed numerous home projects. I am most proud of Ed, who never gave me any inkling that he'd ever know a hammer from a grasshopper.
About a month ago, he called me asking my opinion of a MCLS router table and insert, fence, and frame on Craig's list for $75. It was as new in condition. In fact, the insert had not been drilled to accept any router base. I had given Ed a P+C 690 D-Handle router a few months ago, and provided him with a few common bits.
His brother Ken donated a P+C standard base for under table use. Ed wanted a cabinet within his frame and asked me to share shop time with him to make this happen. We spend a couple days together, and I subsequently finished the project while he was at work. This is the result.
One drawer is obligated to wrenches and other debris. He has 4 drawers which accept 24 bits easch with 1/2" shanks. He has two drawers which can accommodate 30 bits with 1/4" shanks. All those bits may take a lifetime to accumulate, but he has a good start. Construction is plywood, faced with red oak veneer. We were both delighted in the outcome.
George 



