A practical alternative to Bloxgen
Bill Tindall
. It is the stuff in a spray can to make left over finish last in the can.
The problem: Oil based finishes- varnish, polyurethane, oil paint- cure by reaction with oxygen. Put the lid on a half empty can of varnish and 20% of the gas trapped inside is oxygen, eager to set off the curing of what varnish remains regardless of how well the can is sealed. The dreaded crust of hardened varnish will greet you upon opening the can some time later.
The solution: Displace the oxygen from the can before sealing. Bloxgen is just some gas that isn't oxygen or air. I suppose it is nitrogen, or it may be carbon dioxide, as either would work. The problem is that a can of the stuff costs almost as much as the left over varnish is worth.
Alternatives: In principal any gas but oxygen or air will displace oxygen from the can and preserve the varnish. However, my "brilliant" idea of using propane from the gas grill was not successful. Propane dissolves in the varnish solvent, a vacuum is created, and the can collapses. So what other gas might be handy and cheap?
A few small pieces of dry ice would work perfectly, but it requires a trip to the grocery store to get some.
Now days many tire stores have compressed nitrogen for the bogus purpose of inflating tires. Portable air tanks are readily available. One of these tanks pressurized to 150 psi with nitrogen would become a life time supply of gas to displace air from varnish and paint cans. I am going to try to rig a "Freon" tank for this purpose. Perhaps someone can think of an even more convenient solution.



