Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Screws

Posts

Screws

#1

Screws

Larry in NW Ohio

Does anyone now where woodworking screws that are American made can be purchased, if there are any. I tried Google but wasn`t what I was looking for. Of course I may not have looked real good. I can get frustrted very easy. Thank You Larry

Re: Screws

#2

Re: Screws

Mark Mandell - Gone Round In Jersey

Larry,

If you shop McFeely's site, you'll find that they list the country of origin for each item. While some may be Chinese, many are listed as "USA or Canada".

Re: Screws

#3

Re: Screws

Chuck in Mtl.

i was going to suggest mcfeeley's of lee valley...they also list the country of origin for each product.

Re: Screws

#4

Re: Screws

Bill Tindall

The best, in terms of they don't break, come from McFeeley. They are made various places but not the US as I recall.

However, if you are needing only a 100 or so slotted screws I have some 40 year old made in the US inventory that I would part with.

Re: Screws

#5

Re: Screws

Larry in NW Ohio

I`ve looked at McFeely and I didn`t see very many made in the US and the ones I did are not the ones I need, unless I missed them and I can do that more and more every day. I would like to find a good place sonething like

McFeelys but have more made in the US. I`m tired of sending my money to a nation that uses most of it to build up their military and we end up fighting them someday down the road. I may be crazy and many people do, but the way I see it that is still my right to be that way. :D Thank You Larry

Re: Screws

#6

Tough Time, Larry

Mark Mandell - Gone Round In Jersey

Then you have to worry about the guy who plays on such goals by lying to you. "Oh sure, ALL my stuff's made right here in the good old USA." Since the screws aren't marked with little "made in" signs, how you going to know? You think your new Ford or Chevy is American made with all American-made parts? You're looking for screws when it's hard to find any product that is made from scratch in this country.

Re: Screws

#7

Re: Tough Time, Larry

Larry in NW Ohio

I know it would be a tough time if at all to find, but unlike a car or something like that, there is only one part to a screw. Just thought I`d at least try. I`d rather buy from our country than sending it out. Thanks anyway everyone. Larry

Re: Screws

#8

found this one ? *LINK*

del schisler

Look's like american stuff i didn't look complety thro but check and get a phone number and call ??


http://www.absfasteners.com/abs_locations.htm

Re: Screws

#9

Lee Valley Brass Screws

Cecil Nickerson

are made in China, or so it says on the cute brown paper envelope. I bought a small assortment of smaller sizes (#3-#4) and was not impressed.

Re: Screws

#10

Think

Mark Mandell - Gone Round In Jersey

The best you'll find, Larry, is a mix. From any given vendor you'll see USA, China (both), Korea, Thai, German, English, etc. Like it or not, we live in a globalized economy. Consider as well, you by "their" bolts, "they" use the money "to build themselves up," to do that they send your dollars back here to pay for hardware, from bullets to jet fighters, that are all made right here. :D

Re: Screws

#11

Re: Thunk

Mark Mandell- Gone Round In New Jersey

Opps'ed da cookies

Re: Screws

#12

Jesper, Denmark

Re: Re-focus??

Jesper, Denmark

Should the focus not really be on getting a quality screw for what you need them for?

Fortunately, we do live in a globalized economy, where everybody competes on a global scale. Global trade has done more for world peace than anything else I can think of. American companies have been in the forefront of developing low cost sources of materials to stay competitive on a world scale.

Re: Screws

#13

Re: Screws

eliotandmax

Don't ask me how, but I believe there are ways to make your own screws. The antique people know a lot about screws because they often look at screws to check on faked antique furniture.

Re: Screws

#14

Re: Screws

Gary Camp, Bend Oregon

well I didn't find screws here, but you find this site interesting. www.usaonly.us

glc

Re: Screws

#15

McFeeley

Bill Tindall

I just got a shipment of screws and they were all made in China. In the past these screws were Canadian, and other places not China. I will be curious to see if they are of the same quality as before.

Re: Screws

#16

Re: Screws

mark nowicki

Here is a partial list of US manufacturers of fasteners:

www.acmecompanies.com

www.deltafastener.com

www.jimorrisco.com

www.midstatesscrew.com

www.pemnet.com

www.cardinalfastener.com

It appears that US manufacturers wisely concentrate on the higher tech and higher margin products. Wood screws for the hobby market is probably not the most profitable niche to be in.

Mark

P.S. I hope we don't start a world war :-)

Re: Screws

#17

Re: McFeeley

Larry in NW Ohio

Yes Bill I`ve seen that also, that they are going more to China and the last batch I got from McFeely I had to send back because I had a problem of them holding. I was putting uo ceiling panels up and had at least a half dozen that would go in and when they head would start to counter sink it would just start to turn just like it hit air in the attic. The first thing I did was look to make sure I didn`t miss the floor joist. Didn`t miss and didn`t miss any of the others. I never run into this. I looked at the screw and the only thing I could see were the threads looked real junky. I called them and the only thing they could figure out was they had a bad run. So I sent them back. So I try to but USA or Canadian made screw when I buy them IF I can find them. Sorry for the Rant. Larry

Re: Screws

#18

Re: Screws

Ken Garlock, Collin County Texas

Hi Larry. Have you checked the "fastenal.com" site? They list the screw manufacturer as a start.

Good Luck, Ken

Re: Screws

#19

Re: Screws

Grant Wilkinson

I don't know how you feel about Europe, but GRK and Spax, both high end products are made in Germany, I believe.

I think some Robertson's are still made in Canada, where they were invented, too.

Re: Screws

#20

Re: Screws

Larry in NW Ohio

I have no beef with the countrys mentioned but need to find a dealer thar has a good selection and also I`ll check into fastenail Thanks All. Larry