Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

H&L Sanding disk questions

Posts

H&L Sanding disk questions

#1

H&L Sanding disk questions

Barry Irby

I bought some of the Diablo sanding disks from Home Depot. Whatever weight the backing paper is, its too stiff and within seconds the edges start to crumble. The problem other than that is that if you remove the disk and then try to reinstall it, something has happened to the fuzz and the disk just falls off the sander. I am using a Porter Cable 5" ROS and my first thought was that the disk on the sander was worn out, so I installed a new one. Works great on a new disk, but won't hold a used one at all. I never had this problem with other brands. Anyone had a similar experience? Any advice?

Re: H&L Sanding disk questions

#2

Re: H&L Sanding disk questions

John McGaw

I've never used the disks you named but I know that a good quality H&L should be able to survive many re-uses. I buy Klingspor disks in bulk in both 5" and 6" sizes and some of them have certainly been on a sander at least a dozen times. The Klingspor disks have a heavy backing and I've never seen any crumbling of the edges unless I've been careless and run into something while sanding an inside surface or done something dumb like sanding down drywall joints taped with too-hard compound (don't laugh, it works but it does test a sander's dust collection to the limits).

Even the tiny H&L sanding disks made for use by turners which seem much more fragile have served me through several changes although I've been known to destroy the pads themselves by being overly aggressive with them.

Re: H&L Sanding disk questions

#3

Re: H&L Sanding disk questions

Jesse Cloud

Somethings not right. You should definitely be able to reuse and H&L disk. I do so many, many times for the fine grits especially. Take it back, complain. I'm about to give up on HD - last several trips I have either walked out empty handed or even worse with crap that turned out to be unuseable.

Re: H&L Sanding disk questions

#4

Re: H&L Sanding disk questions

Ron Jones

I have never used the discs in question. However, I have seen comments about this product on another forum. Most of the comments were negative or in the form of a question for others to answer. Makes we wonder about using them. Maybe that's why I always go to Klingspore.

Re: H&L Sanding disk questions

#5

Re: H&L Sanding disk questions

Larry in nw ohio

Barry I haven`t used the ones you have, but the last ones I bought I got from Amazon, I can`t remember which but were a good brand, worked well. They are good, if your interested I`ll get the brand for you. Larry

Re: H&L Sanding disk questions

#6

advice?  take them back 


Re: H&L Sanding disk questions

#7

Larry, I buy the

Mike Farinella

Mirka brand from Amazon. Quite good in my opinion.

Re: H&L Sanding disk questions

#8

Re: Larry, I buy the

Larry in nw ohio

Yes Mike, Thank You, those are the ones. Also they are very good. Larry

Re: H&L Sanding disk questions

#10

Re: I'm "Hooked" on Klingspor

Larry Clinton At Frankfort, (Central) Indiana

I would return them. I have used Mirka and the best 3M (good brands) but prefer the Klingspor. Better prices and as good if not better.