Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Dust collector bags

Posts

Dust collector bags

#1

Dust collector bags

Bill Larson

Folks...been a long long while since I posted here, although I do check in and read once in awhile.

I need to replace the collector bags ( 4 of em) on my Powermatic Model 75 dust collector.

Powermatic no longer makes that model and I can't locate OEM bags for it. Oh....found a couple on Ebay but not quite what I am looking for.

Can someone suggest a source for aftermarket bags, perhaps a recommendation on what to get ?

Re: Dust collector bags

#2

Re: Dust collector bags

Rick in Colgate, Wi

Check out American fabric filter Co.

Re: Dust collector bags

#4

Re: Dust collector bags

Bill White

I use the bags from Highland Woodworking. They are felted, and work very well on my HF DC. I use two bags.

Bill

Re: Dust collector bags

#5

Re: Dust collector bags

del schisler

i know you are looking for bag's. Do you have one of these on your system. I do and it sure save's on bag's . You just empty the can. real handy better than the bag dumping . here a link what they are you can get them at lot's of places

http://www.pennstateind.com/store/DCLID21.html

Re: Dust collector bags

#6

Re: Dust collector bags

Larry in NW OHIO

Bill As far as I saw, noone said anything about the filtering capacity of the bag. So I will, get a bag that will filter the smallest dust partical. I think it`s called a .01 micron. If I`m wrong, someone will come along and say what it is. Larry

Re: Dust collector bags

#7

Try Targil

Yonak

If you're looking for collector bags, Bill, believe it or not you may want to check out Targil, the people who make Tabasco Sauce, for heavy plastic bags. I found some that fit perfectly on my dust collector and I believe they are (at least they were when I bought them) cheaper than most.

Re: Dust collector bags

#8

Filter Values

Mark Mandell - Gone Round In Jersey

New clean (or newly cleaned) bags will filter to one level while passing more air. As the bag is used, it acquires a duct "cake" which cuts down on the airflow, but INcreases that bag's ability to retain finer and finer particles. A bag's material will be rated, but the size of the bag will have have an effect as well. As was explained to me, if your bag fully inflates, it's probably too small for the amount of air your blower is moving.

When you order a new bag, make sure you tell the rep what the CFM rating is on your machine's blower.

Re: Dust collector bags

#9

For collector bags Only

Mark Mandell - Gone Round In Jersey

I use plastic on the drop side as well. I'll get 4-5 loads to each bag before I replace them.

Re: Dust collector bags

#10

Re: For collector bags Only

Yonak

I use thin plastic bags inside the thick bags. That way, the thick bags last a year and I get my money back for the thin bags when I sell the shavings for horse bedding.

Re: Dust collector bags

#11

Collector bags

Mark Mandell - Gone Round In Jersey

That works as well ;)

Re: Dust collector bags

#12

Re: Dust collector bags

Robby Wright in San Marcos, CA

Bill - You can get upper bags from Rockler. They are good felted bads. I have been using one for several years now on my DC with good results. Good price too.

As someone else said, American Fabric Filters is a good company. They will make any bag any way you want it and their prices are decent too.

Re: Dust collector bags

#13

Re: Filter Values

Bill Larson

Thanks for all the help so far guys. I did submit and get a quote from American Fabric Filter Co.

Seemed a bit high but haven't completed my searching yet for other quotes.

For discussion. The bags currently on my Powermatic dust collector are 10+ years old...and have filtered very much dust. I think what is happening ( conjecture on my part) is they have become so impregnated with dust, they are not allowing much air to pass thru, thus it's forcing the dust out of other areas rather than allowing it to settle-out in the bags. Such as seams in the collector unit or very small air leaks in the aging bags themselves. While the "dust cake" improving filtration theory has merit, I think there lies within that theory a law of diminishing returns. Once the bags have too much "cake" they lose efficiency to the point of forcing the dust out elsewhere. Yes...I shake them out well with each cleaning of the D/C, it's just that 10 years of dust have taken a toll.

I haven't tried laundering them, and may, but I have some seams (double sewn) that are showing signs of wear and likely just need to replace the bags.

Re: Dust collector bags

#14

Re: Dust collector bags *LINK*

Rick Haverstock

Bill, Here's another way to possibly skin that cat. Consider replacing the upper bags with cartridge filters. I recently upgraded to a Jet DC 1200 and went that way instead of replacing the old leaky bags. The new lower bag is a heavy duty plastic one, while the cartridge is a washable one from Wynn (no affiliation here, just a very satisfied customer). All the info on the modifications needed is from Bill Pentz's website (IMHO a must read for those getting into dust collection) and Wynn filters. It may be a few bucks more than the bags, but really worth it in terms of improved dust collector performance and what I think will be a one time/lifetime purchase from Wynn. Good luck !

Rick Haverstock


D/C Cartridge filters

Re: Dust collector bags

#15

Re: Dust collector bags

Bill Larson

Wow...great link Rick. Thanks.

Looking into cartridge filtering now.