Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Cold and the shop TV

Posts

Cold and the shop TV

#1

Cold and the shop TV

TomD

I bought a TV for the shop a few months back. It is a flat screen, and has a DVD built in. I can listen to the news and music on it, and view videos if I am ever doing a project from some video. My one worry is that it gets real cold up here, and I just don't know if this TV can take it. So far, no sub-zero weather, inside the shop. I do heat the shop when I am in there, but the TV is upstairs and I don't spend most of my time there. It could cool way down. The main floor, even in brutal cold does not generally get cold enough to freeze a glass of water. But the upstairs while an easy to heat insulated wood frame area, does not have the heat sink of the concrete main floor. It could get seriously cold if the temps dipped to -20C.

There are at least three issues:

- How does a flat screen TV do in cold weather;

- How does a DVD do in cold weather;

As regards these two points I am assuming the TV is being operated. I doubt it hurts the TV to dry store it in these conditions, then crank it up in the summer, though I could be wrong.

- The thing has an LED that remains on, and it occurred to me that the TV may have a heating/drying circuit that would be running flat out in a cold environment.

I will add a fourth issue:

- It gets brutally hot in the summer...

Not sure if that is the real list of worried, but it is what is on my mind.

My shop is no man cave where one can lounge around comfortably with a beer, and watch TV, but I was at least hoping to spend more time in the shop, if I wasn't torn about listening to the news, etc...

The model is a Toshiba 19SLV411U, which is an LED TV.

Re: Cold and the shop TV

#2

Re: Cold and the shop TV

John McGaw

It used to be that LCD panels were a bit sensitive to cold temperatures but the only symptom that I recall was that the state transitions became sluggish and caused a smeared appearance in the image. I'd be more worried about the DVD myself -- the level of precision required to successfully play back a DVD is astounding and it seems unlikely that the mechanics involved in an inexpensive drive would be happy with stiff lubricants and such. Sadly the maker doesn't actually specify any environmental limits in documents I could find. I would suggest that you contact them directly and request specific information about operating temperature and humidity.

Re: Cold and the shop TV

#3

Re: Cold and the shop TV

Kevin Stanbary in McHenry, IL

I was curious, so I went to find the full manual for the model you listed...

from that manual:

"Operating conditions

Temperature: 32ºF - 95ºF (0ºC - 35ºC)

Humidity: 20 - 80% (no moisture condensation)"

There is no storage conditions listed, so as long as it's not on, it appears anything within reason should be OK. Commercial electronics are designed to be used indoors in temperature controlled environments.

It will likely operate outside of those conditions, at least slightly, but there are no guarantees. My guess is - and this is only a guess - worst case it will simply not function correctly at lower temps. There is always a risk of damage if you try to operate outside the listed range.