We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I made these music boxes for my girls for Christmas. They loved them and I loved working in my shop, it was a win-win.
This one is based on a design by Jerry Syfert (shot shot #949) I added a few of my own touches, but I took my inspiration from him.
This one is my first attempt at inlay. It is for my 8 year old who loves horses.
This one is my first attempt at veneering.
Overall, I think they turned out well. I learned a lot of things to do differently, and a lot of things that worked well. I used hand tools extensively in these projects, and really enjoyed working on them.
Mike, first let me say those music boxes are lovely. I'll bet your girls just love them!
Second, I can't help but think back many years ago as I watched your dad post pictures of work he was doing. He really seemed to love anything that including using hand tools and particularly, carving. I remember as time went by, watching his skills grow. He was a damned good woodworker who was always open to trying new things and was always curious.
I've seen all your earlier postings here and it's clear you have many of the same traits and your skills are constantly growing. I know Dan would be proud of what you've accomplished. For me - it just fun to be able to watch the progress!
Those are not your everyday boxes, and it looks like you've executed them very nicely, Mike. I applaud your creativity, and I echo David's sentiments. You are definitely not afraid to try something different. Keep up the good work.
I ordered the movements from National Art Craft Supply, who had the best selection and best prices. The movements are independent of the lid, I think there is a way to connect them, but I haven't looked into it yet.
Thanks, Ellis. I really wish I could have figured out a way to remove the saw marks from the bandsaw cutting the curved sides for one of the boxes. I would have settled for learning how to not get saw marks in the first place. As it is, I just pretended they were design elements and ran with it.
Half round cabinetmakers rasps followed by files are a good way to do it. You can also do it with abrasives wrapped around curved sanding blocks. I like to make sanding blocks out of chunks of blue styrofoam or urethane foam board. You can bandsaw and shape the contour by reversing the sandpaper against the workpiece and rubbing the foam block on it.
Of course, you could make a template and rout an exact curve with a long straight bit, then follow up from the other side with a long pattern bit. I've cut 5" of thickness that way.
Regardless, this is why you post your triumphs and questions here, so we can all help you improve and see things in a new way.