We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I am building two new work benches for my two sons. I reclaimed the maple from an old metal shop bench. As you can see it was really ugly to start with.
I had hand surgery a week ago and was unable to finish the bottom shelf or put BLO on anything but the top itself.
This bench was patterned after the bench by Rob. Lang.
Two of the legs were timber off cuts from architectural beams.
The cross braces are soft maple.
I have one quick release vise, but I was unable to put it on with one hand.
I have heard it say that the best gift is one that the recipient would not give themselves. It took me a few decades to get around to making a good bench, which is often the case.
I'm not sure why some aspects of the design were necessary, like the two long stretchers on each side. The last couple that I built, had the long stretcher about 5" higher than the lower one, with a tool shelf across them.
I had the short stretcher above that line, which allowed me to hang a drawer under each end of the shelf, with the slides inside those long stretchers, for specialty tools not used very often.
Then, I hung a couple of drawers under the top, for hand tools needed most often.
If your sons need two stretchers of that scale on their bench, perhaps they need a course in sharpening. He he. It looks life over-kill to me.
Please don't take my remarks as criticism of your work. It looks like you are doing a fine job, but one through M & T joint higher up should more adequate on that plane, and those drawers are a better use of the space up there. My 2 cents, and congrats, you get my nomination for shop-dad of the year.
Actually look closer. those upper stretchers are quite ingenious. They replace the apron on an english style bench or a sliding deadman. Look at the series of graduated dog holes....
Very impressed. I especially like the butterfly joints on the side rails. Two questions: It certainly looks heavy enough. Any idea what it weighs? Second, how did you attach the top?
I have included a picture of my personal workbench. (pic. is rather blurred).
The bench is 9' long and serves me well. However, the drawers are seldom used and the gramercy holdfasts will often hit the crap that is stored under the top. If I were to do another bench, I think that I would build it much like the ones that I built for my sons.
Benches are so subjective because of the varied users and their purposes.
The box on the floor is my solution to being vertically challenged.
what you are doing is just great....your sons will be so pleased !!....what a gift !!....and from that reclaimed timbers to boot....wonderful....you have been showing some very interesting things....its good to have you around.