Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

value of hand hewn barn beams

Posts

value of hand hewn barn beams

#1

value of hand hewn barn beams

Tom Sontag - St. Louis

I suspect the answer to my question depends on location and finding the right buyer, but I'd appreciate any input you might have based on your knowledge and experience.

I have a chance to acquire beams and posts from a barn that might be as old as 200 years. The species is unknown (might be gum?). They are hand hewn and some are as much as 12" x 12" x ~24'. There is a whole barn's worth, call it a truck load. I can find a place for the wood at my urban logging/lumber retailing business and can be patient finding the right customer.

What is your guess as to retail value per board foot? Are you aware of any transactions in wood like this?


img

Re: value of hand hewn barn beams

#2

Re: value of hand hewn barn beams

Randy Johnson

Haven’t a clue on value.

Around here (Indiana) I have never seen a timber frame barn that wasn’t made from several different kinds of wood. Lots of poplar, (tulip tree) oak,

beech, ash, …. I even know of one beam that is walnut. I think they tended to use whatever was closest. In every timber frame barn I’ve ever seen the timbers had quite a bit of checking and cracking. It didn’t have any effect on the strength of the building (they are just about indestructible) but it would probably affect how much useable lumber you would get from a beam.

Re: value of hand hewn barn beams

#3

Re: value added

Mark Mandell - Gone Round In Jersey

From what I've seen, Tom, the value gets added by cleaning and milling the wood into flat stock to preserve as much of its original texture as possible. Popular with decorators and designer for "rustic" paneling and architectural detailing like beams and pilasters.

Re: value of hand hewn barn beams

#4

Re: value of hand hewn barn beams

Galen Vetterick

Just be careful with the sequence you take the barn down as I have seen a whole barn come down on someone trying to salvage the timbers!! :(

Re: value of hand hewn barn beams

#5

Re: value of hand hewn barn beams *LINK*

Stuart Johnson

You might want to contact these folks. There could be a greater value in having the barn taken down as a restoration than using the beams for finished boards.


Homestead Heritage Barns

Re: value of hand hewn barn beams

#6

I've done two of them

Ray - Middletown, IN

The first we almost never got rid of, but had no problem selling the siding. That one was probably 30 years ago. The second, about 12-15 years ago, got piled up and burned. Sold everything else.

Ray

Re: value of hand hewn barn beams

#7

Re: value of hand hewn barn beams

DizD

If you log on to Woodweb and click on buy/sell tab there is a listing for lumber. Quite a few recycled wood listings - should be able to find something close to where you are.

Re: value of hand hewn barn beams

#8

Re: value of hand hewn barn beams

Larry in NW ohio

There is a place in Kansas City, fairly close to the Airport. They buy and recycle all kinds of lumber. If your interested I`ll see if I can find them back. Larry

Re: value of hand hewn barn beams

#9

Cleaning and Milling

Thomas Skaggs, Foothills of Mount Level

Howdy Tom,

Your photo shows the issue quite well. Dirt! Old barn wood can become impregnated with dirt, grit etc. They are notorious for nails and other metal fragments. If kept in rough state then that is not a major problem. But milling is another matter.

Be prepared to trash planer and jointer knifes and table saw blades. Your final price, if you mill it, should reflect the time and the cost of any tool damage to get the job done.

T.