Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

I Need a Shoulder Plane

Posts

I Need a Shoulder Plane

#1

I Need a Shoulder Plane

George Colonel's Workshop-Havertown PA

Good Evening Friends,

My next couple projects will employ mortise and tenons, and I'd like to sweeten up the tenons' fit with a shoulder plane. I've never really used one before, and achieved acceptable fits by scaring the hell out of the joints.

I've looked at some of the offerings, and I can't afford to buy a Veritas or Lie Neilson. I noticed Grizzly and Amazon have a couple at reasonable prices. I'd like not to spend beyond a $50-$75 price range. Wood or cast body would be okay.

Any recommendations, good and bad? thanks.

George

Re: I Need a Shoulder Plane

#2

Re: I Need a Shoulder Plane *LINK*

Bill Houghton, Sebastopol, CA

Do NOT get a Stanley 75 or any of its clones (link below has a picture). A very awkward plane.


http://www.supertool.com/StanleyBG/stan10.htm#num75

Re: I Need a Shoulder Plane

#3

Re: I Need a Shoulder Plane *LINK*

mdclor

George,

Perhaps, if you have been a good boy this year, Santa would bring you one of these. I have one, use it and love it.

FWIW,

Merle


LV Medium Shoulder Plane

Re: I Need a Shoulder Plane

#4

Re: I Need a Shoulder Plane

Jesse Cloud

Merle nailed it. You've been a good boy - the LV shoulder plane will soon become a favorite goto tool - can't believe how many problems it solves!!

If you haven't been a good boy, rip some scrap dead square and glue some sandpaper to it (sanding stick)... That's the equivalent of a lump of coal for us woodworkers. ;)

Re: I Need a Shoulder Plane

#5

a solution

Bill Tindall

I'll bet your family has a hard time finding something you need for Christmas. (at least that is my case) Drop the hint that they pool their gifting and buy you a Veritas plane. It will make M&T joints something to anticipate, rather than avoid.

Re: I Need a Shoulder Plane

#6

Re: I Need a Shoulder Plane *LINK*

Robby Wright in San Marcos, CA

Colonel - I have the L-V medium shoulder plane, a couple of Stanley's and some handmade wooden shoulder planes. The one I reach for the most is a Stanley 92. It fits my hands the best. The L-V plane is really nice, but I have small hands and it doesn't fit well. The Stanley 92 fits my hand, sharpens up nicely and can be set for a fine cut or a course cut, whichever you want.

Amazon shows it for $77 and change, at the top end of your range, but maybe Santa will help out a bit. I included the Amazon link below. Don't forget to access it from our host's website to help him along.

Robby Wright

San Marcos, CA


Amazon Link for Stanley 92.

Re: I Need a Shoulder Plane

#7

All those M-T's sound like a burden...

John in NM

But I'm sure you'll be able to shoulder it :D

(If I may elbow in on your pun turf :D )

Re: I Need a Shoulder Plane

#8

This joint's just full of jokesters

Bill Houghton, Sebastopol, CA

Almost makes one want to bawl and sock-it.

Re: I Need a Shoulder Plane

#9

George....you have to act today....

roger lance

Lee Valley has a Cyber Monday special on their medium size shoulder plane for 30% off....the plane is a "second"....it will have a small flaw....this is a very highly regarded shoulder plane....I have been reading very positive reviews on it for a long time....everyone seems to like it very much....this is an unusual opportunity....spend a few dollars more now for this plane....it has no equal at this price....life is too short for bad tools!!!

Re: I Need a Shoulder Plane

#10

Jump on this one now! *LINK*

Bruce, a MN Galoot

You'll never get a better shoulder plane at this price. I've had one for 4-5 years and it is absolutely splendid!


Lee Valley Cyber Monday

Re: I Need a Shoulder Plane

#11

Cheeky Ain't They?


Re: I Need a Shoulder Plane

#12

Moses Yoder

Chisel

Moses Yoder

If you don't want the LV at 30% off, or the Stanley 92 for $77 (maybe free shipping, looks like a good deal) then I suggest simply learning to trim your tenons with a chisel, the traditional method. Shoulder planes were invented to trim tenon shoulders, not cheeks. This was usually necessary with hand cut shoulders, not so vital now when shoulders are cut on a table saw against a fence.

Re: I Need a Shoulder Plane

#13

Hope You Can Get the LV

Jerry White

George, I am with the others on the LV sholder plane. I hope you can manage to purchase the LV special offer. I own one and agree that it is tops.

However, if you can't swing the LV offer, I have a Stanley 92 that is in the box, unused and unsharpened that I have owned for ten years, more or less. I would sell it to you for $65, shipped.

You give us too much enjoyment on this forum for you needs to go unfulfilled!

Re: I Need a Shoulder Plane

#14

Scrooge McDuck

George Colonel's Workshop-Havertown PA

Good Afternoon Friends,

SWMBO said I could use my allowance to buy the Veritas shoulder plane today. So, I did. Thanks.

George

Re: I Need a Shoulder Plane

#15

Re: Scrooge McDuck

Bill Tindall

a shoulder plane is one of the few purchases that I said after I bought it, "why haven't I owned one of these earlier".

Re: I Need a Shoulder Plane

#16

So did I