Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Celtic Cabinet Finished

Posts

Celtic Cabinet Finished

#1

Alan Young

Celtic Cabinet Finished

Alan Young

I just finished the cabinet with Celtic influences. This was commissioned by a friend I worked with nearly 30 years ago. We lost touch until a year or so ago. She commissioned this cabinet for her Mom. The cabinet is QS White Oak and Walnut. Hand made brass pull.



Celtic knots are featured as trim.




Celtic Cross on the door


Hand made brass pull in the form of the Celtic cross


The cabinet has three drawers




Thanks for looking

-Alan

Re: Celtic Cabinet Finished

#2

That's a beautiful piece of woodworking


Re: Celtic Cabinet Finished

#3

Ellis Walentine

Wow, Alan. Nice going!

Ellis Walentine

I like the Celtic details. I'm assuming the top is veneered.

Good work. You have a very creative design sense.

Cheers,

Ellis

Re: Celtic Cabinet Finished

#4

Re: Celtic Cabinet Finished

Mark Mandell - Gone Round In Jersey

Well done, Alan. Nice balance of the elements, although my preference would be to inlay the walnut into the top.

Query: Are the rounded corners on the inside of the door panel structural and just stylistic?

Re: Celtic Cabinet Finished

#5

Alan Young

Re: Wow, Alan. Nice going!

Alan Young

Thanks Ellis-yes the the top as well as the side panels and front and back of the doors are all veneered. M&T joints on the door and the case frames.

-Alan

Re: Celtic Cabinet Finished

#6

Alan Young

Re: Celtic Cabinet Finished

Alan Young

Hi Mark,

I gave some serious consideration to inlaying the walnut details for the top, But I backed out after getting the crossed pattern set for the veneer. The chance of of a screw-up at that point was enough to go with a surface mount technique.

As far as the door- The panle is a 1/2" piece of BB plywood with the oak veneer on each side. The panel and the door frame have mating 1/4 rabbets. The panle is glued to the frame with a 1/4" walnut border for the outside...

-Alan

Re: Celtic Cabinet Finished

#7

Re: Celtic Cabinet Finished

George Colonel's Workshop-Havertown PA

Hello Allan,

That is a beautiful as well as finely executed peice of Craftsmanship. I could thunder your Celtic wonder. :D Nice job.

George

Re: Celtic Cabinet Finished

#8

Re: Celtic Cabinet Finished

Bill Tindall

To get a uniform reveal around a door is not trivial to accomplish but it sure looks good. Nice job on this feature, and the others as well..........

Re: Celtic Cabinet Finished

#9

Re: Celtic Cabinet Finished

Barry Irby

That is a beautiful design and wonderfully executed. Congratulations.

Why did you leave the reveal at the ends of the drawers? The spacing looks good, but leaves a glimpse of the runners. Just curious.

Re: Celtic Cabinet Finished

#10

Alan Young

Re: Celtic Cabinet Finished

Alan Young

I could have extended the drawer fronts nearly 3/4" on each side. If the drawers were exposed in a static rendition I would have but most of the time the point of opening the door will be to access something in the drawers i saw no need to hide their existence.

-Alan

Re: Celtic Cabinet Finished

#11

Re: Celtic Cabinet Finished

Doug Ridley

Alan, that is a fabulous piece of work. I love it. You are amazing.

Re: Celtic Cabinet Finished

#12

Re: very nice


Re: Celtic Cabinet Finished

#13

Hand Made Brass Pull

George Colonel's Workshop-Havertown PA

Happy Thanksgiving Allan,

Your post was well worth re-visiting this morning, and I came to appreciate the beauty and creativity iof the brass pull. It jumped out at me as a focus, representing the entire piece of work. Very well done.

George

Re: Celtic Cabinet Finished

#14

Re: Beautiful work!