Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E Peacock

21 Nov 2011

Happy Thanksgiving "early" to each of you.!!!

It's been hectic at work and I even got to play in the shop some in the past week. Remember the veneer repair project that I mentioned last week? Well, I learned that it can be loosened by using the LOML's iron to apply heat to it....shsssshhhh....!! Don't tell her!!! :)

It's not perfect by any means but at least I know better about what to do on this repair job.

Preparations are in the mix for Thanksgiving this week. So I'll not blab on any more here and let you get back to doing what you need to do for this busy week for many.

That's it for me...so what did YOU do this past weekend??

Best of weeks to you all and may you be blessed with great food, fellowship, and family memories.

Dennis Peacock

Re: WC Weekend Accomplishments.....

#2

Jeweller's Workbench *LINK*

Nathan

Hello Dennis!

After a bunch of things intervened - among them a one-month trip to the States to visit relatives (I live in Europe most of the time) and a bout with bronchitis - I got back to work on the Jeweller's Workbench I'm making for my wife (see Sketchup export, below). Some of you may recall, I consulted the design here.

This weekend I made significant progress on the cabinets - I'm almost finished making the panels - four big ones for the sides and two narrower ones that I will cut in half (after final planing) for the tops and bottoms.

While I've dabbled some before, this is the first time I've really seriously made panels. So you know how I feel - exhilarated!

Here's the plan, and after that a link to my blog with photos of the glue-ups, etc. - click on it if you want to see.


img

Blog post w/work progress photos

Re: WC Weekend Accomplishments.....

#3

Moses Yoder

Re: Pump House Roof

Moses Yoder

My pump house roof started rotting so last fall I screwed a board to the top and called it good. This fall my wife said that wasn't good enough, so a while back I tore it off and found more extensive damage than I though. So I went and got my materials, 3/8 ply to cover the bottom of the roof, 2x4 joists, insulation, 3/4 ply for the top, metal for the facia and roof edge, tar paper, and shingles. My FIL had some stuff laying around so I got all my materials for about $75. I had the basic assembly put together last Saturday, then this Saturday my FIL helped me put the metal around the edge then we put the tar paper on and ate lunch then I finished putting the shingles on by myself. Now I can cross that off my list, next my wife wants some more frames.

Re: WC Weekend Accomplishments.....

#4

an ambitious project

Bill Tindall

Post here when its done. I don't have time to visit blogs.

Re: WC Weekend Accomplishments.....

#5

Unpacked the tools from storage

Allen Bryant - Bumpass, VA

It has been several years since I've been on here or had time to do some wood working. Between the birth of two kids, a major health problem and a forced job change due to the health problem, my life has finally settled down to where I can start back wood working again. The weekend was spent unpacking and setting the tools back up and inspecting the damage from sitting in storage. So far it appears that rust is my only big issue with the table saw and mortiser having the most. For the short term the shop is going in the garage, but the wife has given the OK to start the process of building a dedicated shop in the back yard.

It's nice to see after having been gone so long that there are still quite a few familiar names showing up on the board and going through past posts, still a lot of good work being done as well.

I have a plans for a project for the kids for Christmas, it's going to be tight but I think I can get it done. The kids want a Lego table they saw in the store. I just can't image dropping that kind of money on a table made of pressed wood. My only hold up is that I forgot to ship the blades out for sharpening prior to packing up the shop and will be shipping them off today. When they come back will determine how many late nights I'm up in the shop.

Re: WC Weekend Accomplishments.....

#6

Re: Jeweller's Workbench

Bill Turpin in WNC mountains

You need some drawers that won't collect dust. You need a lightweight, removable pan for catching precious metal dust. You need a STURDY shelf with replaceable surface area for filing and hammering above the lower pan. Put a four hole electrical oulet on the front somewhere.Do not put outlet on top, outlet holes collect dust and metal particles. Have several places thin enough on upper two shelves to accomadate the clamping foot of vises. Have a place to put a magnifying lamp for up close work.

Install a vertical pillar (2" x 4" - 50mm x 50mm oak, NOT pine, or similiar) underneath her anvil for effective hammering. You do not want bench to bounce when struck.

Re: WC Weekend Accomplishments.....

#7

Two Works in Progress

George Colonel's Workshop-Havertown PA

Good Morning Dennis,

There are two works in progress now in the shop, with two more awaiting time and treasure. I began another chess set with scroll sawn figures which will go to an old Air Force buddy in Oklahoma. So far I've managed to complete all figures, save for six remaining pawns.

I also began refinishing work on a solid birch double bed which belonged to my parents. Our #7 son Jim weighs 240 pounds@6'2" and succeeded to break it where the rails join the foot board and headboard. So far I've repaired the rail ends and let in new birch there, and within the head and foot board mortises. Plan to install new joining apparatus and completely refinish the bedroom suite via potassium dichromate.

Thanksgiving will be hectic for us this year. Normally #1 son George hosts the entire family. This year he took his wife and kids on a Disney Cruise. What a way to chicken out. That Turkey!!!

George

Re: WC Weekend Accomplishments.....

#8

Completed shooting board with donkey ear


Re: WC Weekend Accomplishments.....

#9

Re: WC Weekend Accomplishments.....

Joseph Mulherin

This past week I have been building the router table from which I got the plans from the NewYankee Norm Abram website. Have it almost completed, just waiting for the delivery of the electrical outlets suggested....router and vac work as one...then vac stays on for about 7 secs after finishing routing.

Re: WC Weekend Accomplishments.....

#10

Got some tree ornaments done

Charles Yawn


Still working on more plus other gifts.

Charles

Re: WC Weekend Accomplishments.....

#11

Re: WC Weekend Accomplishments.....

Joseph Mulherin

Couple weeks ago I made a copy of a design I saw on American Woodworker by AC Duecy. It shows a buzzard mounted on a board which states "A Nice Grandma lives here with an Old Buzzard." Bandsawed out the pieces, glued them up, sanded the edges smooth, acrylic painted and mounted it in a flower fence where everyone coming in can read it. LOL LOL

Re: WC Weekend Accomplishments.....

#12

Re: WC Weekend Accomplishments.....

Carol Reed, Pahrump, NV

Picture???

Re: WC Weekend Accomplishments.....

#13

Re: WC Weekend Accomplishments.....

Joseph Mulherin

Sorry, Carol, I do not know how to send any pictures on the computer.

If you want to see the buzzard picture just go to www.americanwiidworker.com, go to down right side of cover page and look for AC Duecy...Camper Sign.