Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

drill bit screw driver adaptor

Posts

drill bit screw driver adaptor

#1

hb

drill bit screw driver adaptor

hb

See picture below:

Can you tell me where to find this type of self centering screw driver adapter that fits into a drill? It is spring loaded, so after you attache it to a standard screw, the sleeve will keep the bit from slipping off of the screw. I bought these years ago, can't remember where, and know one I've talked with here has any idea what I'm talking about. I can't seem to find them searching on the Internet. Probably because I don't know what to call it. I can't find a picture on the internet, but can email pix of it.

Can you tell me how to post this on the internet along with the picture?


img

Re: drill bit screw driver adaptor

#2

Re: drill bit screw driver adaptor *LINK*

John McGaw

If you actually have a picture then you can post it here. There is no need to hunt for another place.

Back to what you are looking for: are you speaking of straight-slot screws or Phillips or something else. Is there some reason that magnetic can't be used? Is the one shown in this link similar?


Whirlpower Screwdriver Bit

Re: drill bit screw driver adaptor

#3

hb

Re: drill bit screw driver adaptor

hb

No, its not a whirl.. bit. This site only appears to accept "Optional Image URL:" in order to show pictures. My picture was taken with my cell phone and is saved to my desktop as a jpeg file. So, how else can i post my photo? Thanks.

hb

Re: drill bit screw driver adaptor

#4

hb

Re: drill bit screw driver adaptor

hb

Yes a picture is worth "a thousand words" but can't post it with the limitation of url only addresses.

Re: drill bit screw driver adaptor

#5

Re: drill bit screw driver adaptor

Carol Reed, Pahrump, NV

Click on "My Profile" to create one and then you can post pictures from your computer.

Re: drill bit screw driver adaptor

#6

Re: drill bit screw driver adaptor *LINK*

Bill Houghton, Sebastopol, CA

There are instructions on how to create a profile at the link below. Let me emphasize that, because you've posted, the first two steps are skipped until you clear cookies from your browser; so that's a necessary first step.


http://www.woodcentral.com/faq/profiles.html

Re: drill bit screw driver adaptor

#7

Will the magnetic bit holder work? *LINK*

Bill Houghton, Sebastopol, CA

The link below is to one at Amazon, but almost any big boxy store, lumberyard, or decent hardware store will have them. They use 1/4" hex inserts, so you can use different kinds of screws.

They are limited as to the size of the screw head, but will handle most screws up to about #9, at least.


http://www.amazon.com/Magnetic-Power-bit-Extension-Sleeve/dp/B00159Y3S0

Re: drill bit screw driver adaptor

#8

Re: drill bit screw driver adaptor

Larry Clinton At Frankfort, (Central) Indiana

I know what you are talking about, I have one or two of these. The only ones I have are for slotted screws. The bit has a spring loaded collar that holds the screw more or less centered on the bit. Mine are old from some cheap bit set, and I really didn't think they worked too well. Dewalt does have something that looks like what you may want. Amazon has a picture and description. The picture looks like it shows the collar in the retracted position. See: http://www.amazon.com/DEWALT-DW2095-Magnetic-Drive-Guide/dp/B00004RH24/ref=pd_cp_hi_1

Re: drill bit screw driver adaptor

#9

How 'bout this ? *LINK*

Yonak

..Really pricey, but it may be a place to start.


Sears

Re: drill bit screw driver adaptor

#10

Re: drill bit screw driver adaptor

Ray Newman

I had something similar made by Makita:

http://www.makita.com/en-us/Modules/Accessories/AccessoryDetails.aspx?ID=34347

If I recall, the bit was removeable and you could insert a TORX, square drive, Phillips, slotted, Allen head, etc., bit

Re: drill bit screw driver adaptor

#11

Ellis Walentine

**Okay, I've posted the picture...

Ellis Walentine

... in your original post. Here it is again...

Ellis


Re: drill bit screw driver adaptor

#12

Re: **Okay, I've posted the picture...

Grant Wilkinson

Here is one from LV. I have it. You can insert any bit that you want.

http://www.leevalley.com/en/wood/page.aspx?p=41011&cat=1,43411,43417&ap=2

Re: drill bit screw driver adaptor

#13

Milwaukee Had Those At One Time

Dave's Not Here

I used to have some of those, don't know whatever happened to them though.

Re: drill bit screw driver adaptor

#14

closest I've seen recently... *LINK*

John in NM

Are those magnetic bit holders with a manual sleeve that extends past the bit to hold the screw more or less straight. They work ok until the sleeve breaks, then they're just a regular bit holder.

The one in the link has a decent diagram of what I'm talking about, though the holder itself is nothing so special you have to mail order it. I actually have some difficulty finding regular, un-sleeved bit holders due to the clutter of all the various fancy ones in the tool isles.

I haven't seen one of those spring loaded ones in years.


Sleeved bit holder

Re: drill bit screw driver adaptor

#15

Re: drill bit screw driver adaptor

Al Stokka - Cambridge, Iowa

Good afternoon hb,

The tool is made by Apex (part of Cooper Tools)

One place to buy, of many I'm sure, is wwwDOTall-specDOTcom

Here's how All-Spec describes it on their web page:

Apex

#M-490 - Magnetic 1/4" Hex Power Drive Bit Holder for 1/4" Insert Bits, 2-31/32" Long

Al

Re: drill bit screw driver adaptor

#16

Re: drill bit screw driver adaptor

Galen Vetterick

The one I have came in a small set sold by Sears. It only had one size slotted holder like that and then just plain other screw bits in a small gray plastic clamshell case. I think what they sell now still has a sleeve but is magnetic. I never really found it very helpful if you drill the proper pilot hole anyway.

Re: drill bit screw driver adaptor

#17

Re: drill bit screw driver adaptor

Gary Camp, Bend Oregon

HB In the past I got those off the Vermont/American rack at a local "we got a bit of everything store"