Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Suitable casters for wood laminate floor?

Posts

Suitable casters for wood laminate floor?

#1

JL

Suitable casters for wood laminate floor?

JL

I've been asked to build a bar. They would like it to be moveable. The floor will be a wood laminate floor over concrete. It will be about 8' or so long and 15" or so deep x 40" high. Call it about 150 lbs. Loaded with "stuff" say about 300 lbs max.

I'm thinking urethane casters as they would be less likely to mar or mark up the floor. Any other suggestions or preferences??

They also want a flip up access - I was figuring on using Soss hinges for those. I figure that the bar top will probably end up being something like red oak with some bar top finish.

The bar will move forwards and backwards. The idea is that the lobby area will be "clear" before a show. They want to move the bar forward during the intermission and move it backwards after the intermission.

Re: Suitable casters for wood laminate floor?

#2

Re: Suitable casters for wood laminate floor?

Galen Vetterick

You did not say how heavy the bar is going to be and if the wood laminate floor is floating on foam underlayment. If it only needs to track forward and back then I'd use polyurethane rollers. Straight/bilge 10" long rollers for boat trailers are about $22 each and use a 5/8" shaft. Four of these would let it track in one direction and not worry about it moving otherwise.

Just a wild hair idea.

Re: Suitable casters for wood laminate floor?

#3

JL

Re: Suitable casters for wood laminate floor?

JL

I don't know if the floor will be on foam - it hasn't been laid down yet. I presume they will have something suitable. I edited my post with a "max" weight.

Re: Suitable casters for wood laminate floor?

#4

Re: Suitable casters for wood laminate floor?

Larry in nw ohio

JL We put in a wood floor, oak, and this gets a mark from an entertainment center that has 6 rubber wheels. It looks like it an indentation left by the wheels. So I put it on 1/8" pressed board to keep it from marking up the floor. Larry

Re: Suitable casters for wood laminate floor?

#5

Engineered wood or laminate?

paul in AZ

Two very different products. Also floating or glued?

A laminate floor glued down to concrete would likely resist almost anything. It is a very hard plastic-y material.

If floating, the foam underlay may allow wheels to leave tracks to some extent. You can easily tell if its a floating laminate by walking on it. It won't sound or feel like a solid wood floor.

An engineered hardwood floor glued down to concrete would probably act much like a solid hardwood floor. You can look up Janka hardness numbers for whatever species of hardwood the surface veneer is. It could also depend on the firmness of the intermediate wood plys underneath the hardwood veneer.

Re: Suitable casters for wood laminate floor?

#6

How about

John T

How about using 8 casters to support it?

Seems like you're less likely to dent the floor if the weight is distributed over 8 (or maybe 12??) points, instead of just 4 at the corners.

The bar weighs #300 (assuming the contact point of the casters is 1/2 square inch) spread over 4 corners = 150 psi

Add 4 more casters along the bottom: #300 / 8 casters * 1/2" = 75 psi.

Find space for 12 casters, and its: #300/ 12 casters * 1/2" = 50 psi.

Not sure how Janka hardness corresponds to psi compression, but whatever it is, it's gotta be better to spread it over more points of contact.

-John-

Re: Suitable casters for wood laminate floor?

#7

JL

Haven't put it down yet - so I don't know

JL

I will get a sample. I'm presuming it is an engineered wood floor as they were talking about me matching the color.

Re: Suitable casters for wood laminate floor?

#8

Re: How about

Joseph Mulherin

JL, just a wild suggestion....get some 4" caster wheels, cut the shaft holding the wheel and widen the foot using some sort of rubber/polyurethane like materials so the foot is say 6" wide. This will soften the possible denting and help with the cabinet to still be able to roll out and back into place.

Re: Suitable casters for wood laminate floor?

#9

Re: Haven't put it down yet - so I don't know

paul in AZ

In that tough durability and lower cost are features of laminates that could easily be what they choose. You may be surprised at how closely the new generations of laminate flooring resemble wood -at least visually. Many are basically photo copies of real wood. Of course the sound and feel don't measure up to real wood flooring but laminates are what you see in many commercial applications.

Find out if they are floating or gluing the flooring. A floated floor lives on a sheet of foam underlay and that could be the most compressible component of a laminate floor. If they glue it to concrete you could be home free with whatever caster choice you make.

Re: Suitable casters for wood laminate floor?

#10

Re: Suitable casters for wood laminate floor?

John Veerkamp

The bigger problem will be the impressions left on the floor where the bar sits against the wall. Moving on wide rollers as suggested above will mitigate the tracks, but there will certainly be impressions left where it resides.

Re: Suitable casters for wood laminate floor?

#11

air sled

Dick Coers

Here's the answer! Airsled appliance mover, includes blower and two air pads for $632. No scratches, no dents.

http://www.airsled.com/appliance.htm

Re: Suitable casters for wood laminate floor?

#12

Danger danger Will Robinson !

Pete in Holland MI

15" wide and 40" tall ?

Even without casters, this will be a tippy bar, especially it gets leaned into. Put swiveling wheels under it, and, when the swivels all point toward the center, the contact on the ground will be closer to 11-12" is all. Seems like a tip-over accident waiting to happen.

How are you going to keep it still while in use?

Might want to make cross section mock-up of cardboard to see what I am describing.

Proceed cautiously here......

Pete

Re: Suitable casters for wood laminate floor?

#13

JL

Re: Danger danger Will Robinson !

JL

I was figuring on 40" tall - including casters. I was going to have locking casters in the "back" - on the open side. I was figuring on storing material on the bottom shelves to weigh it down. I can always use cast iron stage weights - we have plenty of those. I could make it wider - I'll see what lumber I have.