New to this
Tony Frisina
I just became permanently disabled and now finally have the time to start doing woodworking projects. I have no experience doing this and I need advice on how to start. Help!!!!
Knowledge You Can Build On — Est. 1998
New to this
Tony Frisina
I just became permanently disabled and now finally have the time to start doing woodworking projects. I have no experience doing this and I need advice on how to start. Help!!!!
Re: New to this
JL
Sorry for your condition.
It really depends on your disability and what sort of woodworking you may want to tackle. Are you wheelchair bound? Can you stand for limited times?
I know some people who turn while seated. I know many who carve while seated. You can also do "flat" work while seated - but possibly not larger projects.
Big question, but it is a place to start.
Ray Thompson - Middletown, IN
I have been mentoring a guy new to woodworking for about 2 years now. We were well past a year before he decided what direction he wanted to delve into. Hand tools, power tools, turning, scroll work, woodburning and carving; the list is almost endless. If possible find someone in your area that you can hang out with to begin to learn a little. Also, your budget, available space, and disability will help define where you can go. Keep asking questions, there are all kinds of skill levels here that can help.
Ray
Read *LINK*
Bill Houghton, Sebastopol, CA
See what woodworking books your local library has to offer (and, if it's part of a county or suchlike system of libraries, what the other sister libraries offer; a lot of libraries now have online catalogs that you can browse from home), and read through them. There seems to be a lot on the interweb on the subject of woodworking with disabilities (googling that phrase got me 19 million hits, although of course some of them will be utterly unrelated - Google's search engine suffers from over-eagerness at times); I've linked below to an Australian forum focused on this particular topic.
But you'll be a woodworker first, just one who may have to be creative in doing some of the steps; so read through the general books and see what area attracts you. Then start with some small projects and see if you like it.
And think, early and often, about dust control. If your upper body mobility and strength is good, you should probably start with hand tools, which reduces or solves the dust problem*; but if limits on upper body strength mean you need to think about small power tools instead, don't let yourself live in a dust cloud.
*Disclaimer: I'd recommend hand tools to ANYone starting out. It's a good way to learn, mainly because you learn a lot more about how wood works when you have to work it with nothing but sharp edges and your own grunt.
http://www.woodworkforums.com/f142/
join a club and take a class
Re: Read
Larry in nw ohio
Tony A very hardy welcome to WC and hope you come offten. If you didn`t already do it, make up a profile for here at WC the site will work better for you. Also if you don`t mind telling us, tel us where you live, then you may have someone who lives fairly close to you that you can contact and maybe work with. WC is a very friendly place to come to. I`ve been on disability since Feb. of 2001. Larry
Re: New to this
Tony - memphis
What do you want to build? Something I have found is, like lots of other things, fundamentals are very important. Learning joinery, and other basic techniques well will help you later as you take on more complex projects. Does your disability limit your motion, abiity to stand, etc? That could direct you to a specific genre of woodworking. Turning, carving, scrollsawing, etc. Safety is very important. All of the safety concerns in woodworking are not intuitive. I took a couple of continuing education classes at my local college that helped me tremendously in all aspects. Classes might allow you to get a taste of the various aspects of woodworking and make you aware of safety issues too. The Woodcraft stores have lots of beginner classes. You might also spend some time at Barnes and Noble over a cup of coffee looking at all of the woodworking magazines to see what types of projects appeal to you. Some of the magazines offer prjects geared towards the beginner. For a long time, I picked projects based on new techniques I was required to learn. Anyway, sorry about your disabilty, but welcome to woodworking. Good luck with it.
Tony
Re: New to this
Tony Frisina
Thank you all for the great ideas. Just to let you know, I live in Southern California and my disability does not let me stand for any length of time. It looks like I need to find a mentor or classes so that I can get some basic information. Then I can decide what direction to take. Again, thank you all!
Re: New to this *LINK*
Thomas S Stockton
Tony
You're lucky to be were you are southern California has a lot of classes available from both public and private groups. Pick up a copy of Woodworkers west Magazine either online or my local Barnes and Noble carries it. They have a really comprehensive list of classes as well as ads that can point you in the right direction.
Tom
http://www.woodwest.com
Welcome to the craft!
Stephen Kirk
You'll take a lot of wrong paths but don't worry, they are all fun and usually valuable.
I saw lathe work mentioned and that is certainly good for mostly seated work. So is scroll sawing. They've got the benefit of instant gratification and the learning curves arent too bad.
However, I've seen some ingenious people modify machines to suit their own work styles. I'm sure you can find some info around the Internet. Routers work handheld, I'm sure bandsaws can be lowered, big tools can take stock feeders, etc.
A club is a great place to start. Since you'll want some type of good bench, finding some people to help with any modifications can be very helpful to get you started.