Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

OT - Metal "T" source?

Posts

OT - Metal "T" source?

#1

JL

OT - Metal "T" source?

JL

I've got to put a bridging piece between a stainless steel table top and the dishwasher at church. There is about a 1/8" gap or so. The water from the rinsed dishes gets on the table top and makes it way to the floor.

I'd like to bridge the gap and put some caulk to seal this. Therefore I need a source of material for bridging.

I was thinking of a aluminum or stainless steel "T" - but I haven't found a source. I only need 2'.

Thanks.

Re: OT - Metal "T" source?

#2

Re: OT - Metal "T" source?

steve mackay

When I was a young 'un and cooking at Scout camp we had that gap between the sink and a counter. We used the covering from one of those extension cords that go across open areas in offices. Looks kinda like a speed hump with the cord in the middle. Silicon adhesive held it place. Water ran to either side and it was sealed. Worked great. Probably still there !

Re: OT - Metal "T" source?

#3

Re: OT - Metal "T" source?

Larry Clinton At Frankfort, (Central) Indiana

If I were doing this I would ask around to see if anyone had an old kitchen sink mounting ring. A little work with a Dremel and some cutoff wheels would make you a slice the right length and removal of the bottom clip area would allow it to slip into the gap - silicone or your choice of sealant would make this a permanent fix.

Re: OT - Metal "T" source?

#4

Re: OT - Metal "T" source?  *LINK*


t-moldings

Re: OT - Metal "T" source?

#6

Re: OT - Metal "T" source?

Larry in nw ohio

JL I think the Big box stores have some of this T moldings in the area where the weather stripping is. I`ve seen some there when I was looking around stripping for our windows, so it`s in that area. Good Luck. Larry

Re: OT - Metal "T" source?

#7

JL

Re: OT - Metal "T" source?

JL

I'll look again at HD - but I haven't really found anything.

Re: OT - Metal "T" source?

#8

JL

Re: OT - Metal "T" source?

JL

Thanks - looks like the best solution. I'll pay more for shipping than the piece - but oh, well.

Re: OT - Metal "T" source?

#9

Re: OT - Metal "T" source?

Al Stokka - Cambridge, Iowa

JL,

Ask Google to find "Carol Wright". Your looking for the company "Carol Wright Gifts".

The exact product you're seeking has been invented and costs $2.99. Carol Wright calls if "No-Spill Strip".

Al