Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Chain Saw "Chaps"

Posts

Chain Saw "Chaps"

#1

Chain Saw "Chaps"

Bill Tindall

I posted something similar among the chain saw discussion below but decided it needed a place where it would get more attention.

If you use a chain saw buy some chaps. They have gotten cheap, just $70 from a place like Bailey's in CA, or other logger suppliers. They aren't for sissies. Every professional sawer uses them. My neighbor cut his leg and bled to death before he got help. Chaps would have saved his life and maybe yours.

Need more convincing.....A former neighbor was emergency room MD. He would not own a chain saw as a result of the wounds he encountered (he called me instead when trees fell across his long wooded driveway!, but in return we got good ER service) He wouldn't even watch me saw.

Be aware that they can be sized unusually. The size is from the top of the shoe to the belt, not crotch like pants. You will look way cool wearing them and passers by will think you know what you are doing an ask you to cut trees from them.

Best advice I got from my mentor- wear steel toed shoes and don't start or run a saw unless there are two feet on the ground.

Re: Chain Saw "Chaps"

#2

Re: Chain Saw "Chaps"

Don Orr

Outstanding advice Bill ! If just 1 more person saves themselves an injury by heeding your advice it will be well worth it. I have the full wrap around chaps from Bailey's and wear steel toe boots and Husky cutting helmet. So far the worst injury I have from a chainsaw is a cut on 2 fingers from brushing against a non-moving chain (electric saw in my garage). I plan to keep it that way.

Gear is replaceable-legs and lives are not.

Re: Chain Saw "Chaps"

#3

I prefer the full wrap chaps too

Bill Tindall

And Bailey has green chaps. I look like an escaped convict in the orange ones.

Re: Chain Saw "Chaps"

#4

The chaps work...story:

Grant in Iowa

A friend of mine and I were cutting several large oak trees that had been topped by a storm. A tree was being felled that was around 30" in diameter, and the remaining trunk was about 35' or so. There were several friends there helping and since a large tree was about to be felled, most of us were either watching or supporting the task.

My buddy donned his safety gear (chaps, chainsaw helmet, gloves, steel toes) and headed to the base of the tree with his Stihl 440. The 440 is a good sized saw with lots of power and a pro "full chip" chain. This saw would be considered a small "fellers saw" in the pro world. The area around the tree had brush and saplings that needed cleared to provide him a safe work area.

What we should have done is to take a smaller saw and clear the brush, but what was done was he instead just used the 440. Far from needing the full power of the saw, he ran it just above idle and trimmed away small 2" saplings and assorted brush. While he did this, he kept his feet planted and turned his torso to his left to cut something near the ground.

At that moment, the underside of the bar contacted the chaps and a stream of white kevlar fiber immediately wound around the sprocket on the saw, totally ensnarling it. This sudden load on the engine stopped the chain and lugged the motor to a stop. He was uninjured. He then had to make the humiliating, but relieving hike back up the hill to spend the next 15 minutes cutting the fibers from the saws sprocket.

The chaps work. It would have been an ugly event otherwise.

I use mine even for "just a quick" cut. We often work together in the woods, and we like the brightly colored chaps, helmet, and other gear. It makes it very easy to see someone out of the corner of your eye before a mistake is made. Knowing where everyone is when working is very important. Such bright colors also help prevent leaving things behind when the days work is done.

FWIW,

Grant in Iowa

Re: Chain Saw "Chaps"

#5

great story- the Saw Stop for chain saws.

Bill Tindall

I hope we convinced everyone to log onto Bailey's and order some.

To reemphasize, they work by stalling the chain by clogging it with fiber. Hay bale strings work too should you be cutting up round bales of hay with a chain saw.

Re: Chain Saw "Chaps"

#6

Bill  How

Ron in Sterling, CT

do you know that baling twine will choke a chain saw?

Ron

Re: Chain Saw "Chaps"

#7

Answer....sheep

Bill Tindall

Sheep eat hay. Round bales of hay are cheaper by 10X than square bales of hay. Round bales can be made into cake-slice shaped pieces with chain saw. It is easy to not get every bit of twine from the bale before "cutting the cake". It is not easy removing the twine that has become one with the sprocket!

I guess if one were cheap they could make chaps from baler twine. Do we have a cartoonist that could illustrate?

Re: Chain Saw "Chaps"

#8

Almost made me ill.....

Barry Irby

I thought you were going to say you were cutting up a Sheep and the wool stopped the saw. It was a horrible vision. Now that I think about it sheep are always wearing their chaps. If you decide to try this and see if it works, don't post any pictures unless it works much better than I suspect.

Re: Chain Saw "Chaps"

#9

Re: Almost made me ill.....

Bill Tindall

Remember the scene in Animal House with the dead horse in the Dean's office?

Re: Chain Saw "Chaps"

#10

Re: The chaps work...story:

Larry in nw ohio

Does Baileys have a web site? Thank You Larry

Re: Chain Saw "Chaps"

#11

Re: The chaps work...story: *LINK*

Bob Entwisle in NJ

Hi Larry

Here's a link

Bob in NJ


http://www.baileysonline.com/category.asp?catID=135

Re: Chain Saw "Chaps"

#12

Re: Chain Saw "Chaps"

Dale Stansbery

I sewed camo material over my bright orange ones and occasionally use them when I go hunting through particularly thick berry or wild rose thickets, work great!

Re: Chain Saw "Chaps"

#13

What a joy to see safety embraced!

Tom Dunlap

The mindset here is sooo much different than what I'm faced when I teach arborists. Some arbos think that double knee pants are chainsaw protection!

There are several European companies that make comfortable protective pants. They are a bit more expensive but much better protection.

These folks have them:

http://www.stein-usa.com/

http://www.treestuff.com/

If chaps are what you're getting make sure that they come down to the top of your FOOT not the top of your boot. And, spend a little extra to get full wraps.

Be careful who you buy from. There are companies that import cr@ppy from China that fall apart or the material falls apart inside the chaps/pants.

Re: Chain Saw "Chaps"

#15

Wuestion for you Tom.

Grant in Iowa

Can you wash them in the washer? if so, what's the procedure? Mine are pretty grungy from sawing rotten wood and bar oil spray...

Mine are the Stihl chaps.

Thanks in advance,

Grant in Iowa

Re: Chain Saw "Chaps"

#16

Washing saw pants

Tom Dunlap

Most of them can be washed. Some of the older ones that used Kevlar couldn't be washed.

The best answer is to check the Stihl website. There are different fabrics used in the cut resistant material and some need different care than others.

A friend of mine who works for one of the big national tree companies told me that his company tracked the costs and savings from mandating leg protection. I wish that I could pull up the costs...but they had the 'before' costs worked out on a per surgical stitch cost...something like $120 per stitch...and chainsaw cuts are not neat like knives or even table saws! Afterwards the costs plummeted overall and they found that they weren't replacing cut leg protection either. They found that the sawyers stepped up and paid attention. When they mandated leg pro they unveiled a company wide chainsaw safety program along with it. combined...meant fewer accidents.

Re: Chain Saw "Chaps"

#17

Aren't grungy chaps a badge of honor?