Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

WC Weekend Accomplishments.....

Posts

WC Weekend Accomplishments.....

#1

WC Weekend Accomplishments.....

Dennis E Peacock

24 Oct 2011

Good Morning Everyone,

I spent the week last week in Alabama with my mom. I worked my day job from there and helped her during my lunch breaks and I had all day Wednesday off to take her around places and get more legal and essential stuff done. We are getting closer to being done, but I've heard that the entire process takes about a year or longer before everything can be considered "finished". Needless to say, I spent 2 days total travelling to / from Alabama and I traveled it via my motorcycle. I love the ride and this time of year is GREAT to ride and I get to experience the fall colors instead of looking at them from the other side of a piece of glass. Needless to say that there was no woodworking for me as I got back home Saturday night, church Sunday, family night Sunday night and now it's back to the grind.

Well, that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments.....

#2

Re: WC Weekend Accomplishments.....

Doug Ridley

Finished up a few Christmas ornaments.

Re: WC Weekend Accomplishments.....

#3

Re: WC Weekend Accomplishments.....

Hal

Hello Dennis. My son passed away (that's not supposed to happen) a few years ago. Since he died intestate, there was quite a process involved in being appointed administrator (you probably didn't have to go thru that) and then it was several months before everything was wrapped up and I was dismissed from my duties as administrator. During those several months, there was much time when nothing was happening - just waiting for the wheels to grind. Hope it's not too painful for you. It's not fun. Best of wishes to you. Hal

Re: WC Weekend Accomplishments.....

#4

Re: WC Weekend Accomplishments.....

George Colonel's Workshop-Havertown PA

Good Morning Dennis,

It was sorta a mixed bag around here. I stripped the drawers to the lingerie cabinet, since the initial color and shade missed the mark set by theother pieces in the bedroom suite. Lots of sanding on that 1/4 sawn sycamore. I re-dyed it and was very satisfied with the results, which do match the dyed QS sycamore accent of the other items. One of our kids' friends was married on Saturday afternoon, and SWMBO and I attended the church as well as the reception. I slept very poorly on Saturday night, and felt like a zombie during church Sunday Morning. We met an old friend who took us out for a delicious breakfast. I had a good hours nap that afternoon, and returned to the shop to apply more finish to the drawers and clean it up for the next project. My #2 son Ed came by to pick up the 34" X 44" mirror frame I had finished for him: oak stained with Early American by minwax, and this with an inlaid QS Sycamore band accent. Looked great. Then #6 son Jon came by to borrow my 1/2" slow turning all metal Craftsman drill he needed to stir some aluminized roof coat for his home. (I bought it back in 1963 right after I came home from Vietnam). My #5 son Steve departed for home in Virginia. We skipped the family dinner party. Have a great week, Dennis.

George

Re: WC Weekend Accomplishments.....

#5

Ellis Walentine

WoodCentral anniversary

Ellis Walentine

Thirteen years ago yesterday, WoodCentral.com went live on the Internet for the first time. We launched our first forum application that week, and the rest is history.

I celebrated by spending a couple late evenings in the shop, finishing up a bunch of loose ends and getting ready for our upcoming kitchen project.

Ellis

Re: WC Weekend Accomplishments.....

#6

Not prepared to say accomplishment yet

Bill Houghton, Sebastopol, CA

Our 1970s era hot tub has been leaking for a while from a bolted joint in the filter housing. Last week, I tried to re-caulk the joint, but not well enough. Yesterday, I tried again. I'm now waiting for the two small tubes of silicone aquarium sealant I applied to cure (48 hour cure time) before finding out if I can keep this old critter going for another few years.

Re: WC Weekend Accomplishments.....

#7

You know how to have fun, Ellis!


Re: WC Weekend Accomplishments.....

#8

Bed Project Revisited

David Yoho

Our youngest son moved out from the nest again this weekend. Several weeks ago he asked me if I could make the bed frame I built years ago for his then hybrid water bed darker in order to contrast with the wood floors in his new place.

When I originally built the headboard, foot board, and side rails, they only surrounded the bed, which was supported by a pedestal base. After he moved out the first time for a year, we replaced the water mattress with a conventional queen mattress. The base that looks like a traditional box spring is really heavy and built to support the original mattress. There are no springs in that unit and it weighs so much it's a pain to move. So, we decided it was time to purchase a real box spring and convert the bed rails to hold it.

I added cleats to the insides of each rail, notched to accept five bed slats. Since the wood is red oak with a clear polyurethane finish, I decided it was too much trouble to strip. In order to darken the finish I started by scrubbing the entire thing with mineral spirits to remove any wax. Next I hand sanded the surfaces with 100-grit paper.

To add color I mixed a tablespoon of dark walnut Trans Tint dye with a few drops of black into a quart of Seal Coat shellac. I sprayed this mix on in numerous coats. It took two quarts to do the job but the color was perfect. I followed up with several coats of satin Arm-R-Seal. I may post a picture or two once we get it set up. I have to say for someone that sprays as infrequently as I do it turned out real nice.

Re: WC Weekend Accomplishments.....

#9

Made 100' of shoe molding

Bill Tindall

It is easy to make. Straighten each edge of a board. Run a 1/2" round over down each edge. Rip off the shoe molding. Repeat.

The thin kerf 40T 7-1/2" blades I prefer work great for the task.

Re: WC Weekend Accomplishments.....

#10

Weekend Accomplishments--well, more than one

Joanne in Point Pleasant, PA

I've been meaning to post this for a while.

Some months ago, a friend returned the Radial Arm Saw I loaned him for his shop. My brother had left it with me when he moved south and I had not really used it, since the sight of that big blade above the table scared the bejeebers out of me. It was also on a rickety cart and needed a new table. When I got it back, I decided it needed a stable bench that would be safer. Along one wall of my shop there was a shallow shelf/bench that was mostly a dust and cobweb collector. I had planned on making it a bench for a sliding miter saw, but since I had the RAS, figured I'd save some money for now and use that. I built out from there, made some storage bins for cutoffs, and some drawers for stuff and Voila!

The top has replaceable hardboard inserts for the 90 and 45 degree cuts, which is probably most of what I'll do. I tried making a hood to aid in dust collection. One of these days I'll rebuild that, but for now, it helps. Most of the dust on a RAS is in front of the fence on top anyway. I added a floor sweep to that section of the DC piping, to help with the dust that missed the hood. One of these days I'll treat the old guy to a new blade. Anybody have a favorite blade for use on a RAS (I think it's a 10").

Finally, I used some of the scraps to make a nice coat/hat rack for just inside the door.


Re: WC Weekend Accomplishments.....

#11

Favorite blade for RAS

Neal in San Jose

I don't have the RAS any more; decided it took up more space that it was worth. But, I bought a blade designed for the RAS from (I'm pretty sure) Forrest. It had a 5 degree negative hook, and it transformed the saw from something that tried to eat me every time I turned it on to a mild mannered wood cutter! Well worth the money if you plan on using the RAS as more than just one more horizontal surface.

Re: WC Weekend Accomplishments.....

#12

Jason Roehl in Lafayette, IN

Negative hooks...

Jason Roehl in Lafayette, IN

...are also appropriate for sliding miter saws. Well, not just appropriate, but pretty much required, unless you're only cutting construction lumber and don't care how many fingers you have.

Jason

Re: WC Weekend Accomplishments.....

#13

Re: WC Weekend Accomplishments.....

Dale Lenz

Glad you had a nice ride on your bike, Dennis. Wife and I went to OKC for my MIL 80th birthday dinner on Friday. Had a late breakfast with my mother then back to NE OK to work fire duty, it rained, so... no duty, so... got to play in the shop on some orders. Woodworking orders got dry the second half of the summer, but just within a week or so, the fall is promising a good harvest, Yes!

Re: WC Weekend Accomplishments.....

#14

Re: WoodCentral anniversary

Ken Oakley Sunny St. Cloud, Fla.

That means 13 years ago I started visiting WoodCentral just about everyday. Sometimes multiple times daily. Still do. Gee, I was young back then.

Re: WC Weekend Accomplishments.....

#15

Wow! Looks like my old friend....

Barry Irby

I have that same saw. Bought it in the middle 1960"s when I was in high school. My first major tool and only one for a while until I got out of college. Got to be the same version of the saw. I actually love mine and use it a lot for breaking down stock and cutting grooves and rabbets across stock. I know its the toll everybody loves to hate but mine is my buddy. The right blade for it is a major improvement. Get a real (negative rack) RAS blade and you will be impressed.

Nice setup. I have a similar dust hood to a four inch DC port and it works fairly well. I don't have the hose to the hood, does that help much?

Re: WC Weekend Accomplishments.....

#16

Ellis Walentine

Hey, nice wardrobe

Ellis Walentine

And nice radial saw stand, too. That's an old 60s-vintage Craftsman. I had two of those and they were excellent.

Nice work, Joanne. Remind me to drop by sometime soon to catch up.

Ellis

Re: WC Weekend Accomplishments.....

#17

Re: Hey, nice wardrobe

Joanne in Point Pleasant, PA

Thought you'd like that part.

You know you are always welcome to stop by here. I'm trying to finish cleaning up my office, so you'll get the full effect of the closet built-ins I just finished a week or so ago (my next post with pics). Not quite the Tansu you championed, but very practical for the space. And it came out nice, if I do say so. And about time! You know I've been talking about these built-ins almost as long as you've been talking about your kitchen. :-)

Re: WC Weekend Accomplishments.....

#18

Ellis Walentine

Touché 


Re: WC Weekend Accomplishments.....

#19

Re: Weekend Accomplishments--well, more than one

Charles Jackson III

Nice RAS station.