Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Which Grits would you buy???

Posts

Which Grits would you buy???

#1

Which Grits would you buy???

Barry Irby

I am about to stock up on sand paper for my Performax and combination disk and belt sander. So thee are three of r four questions.

First, what type of abrasive would you buy? Aluminum Oxide, or some sort of ceramic?

Where would you buy it?

And what grits would you buy? I find the Performax seems to work best at something between 60 and 120. I'm thinking of buying a large roll of each 80 and 120. Any better ideas?

Don't have a lot of experience with the belt/disk sander. What would you recommend?

Re: Which Grits would you buy???

#3

Only one vendor to consider

Neal in San Jose

Click on Klingspore in the Marketplace and Woodcentral gets a wooden nickel or something. I've bought their aluminum oxide bulk rolls from them for my Delta and been happy. A minor nuisance to cut them to length, but an old belt for a template makes it pretty easy. I have used the Zircon on my belt sander and disk sander, and it seems to last a lot longer and be worth the price difference.

As far as grits? My wide drum Delta is almost always loaded with either 80 or 120. I've found it awfully easy to burn cherry and maple at finer grits, so I stay with the medium grits. If I need to go coarser, I usually just send it thru the planer or break out a hand plane.

Re: Which Grits would you buy???

#4

Re: Which Grits would you buy???

steve mackay

I just stocked last week. Ordered from Grizzly (Where I bought my disk/belt rig). Just their "off the shelf" stuff. 80 grit on the belt and 100 on the disk. 10 pak of belts for $46.95. Decent deal. Get three or four snot blocks (Harbor Freight) and I'm set for another seven or eight months.

Re: Which Grits would you buy???

#5

I like Klingspor Zirconium

Grant in Iowa

I keep 80, 120, 150 and 220 on hand, and I prefer the zirconium paper (blue from Klingspor). I find that this paper not only lasts much longer than aluminum oxide (two to four times as long), but it seems to not load up as much. When I discovered it, I still had a good supply of Aluminum oxide paper, which I do plan to use up. I have had good results from 3m Zirconium paper as well, but it seems to be harder to find, plus supporting Klingspor helps WC. Be sure to click through from the Klingspor ad on this site if you decide to go that way.

I just upgraded from a Performax 10/20 10" sander to a Performax 25" sander(stealth gloat). I am now eying the larger sander as a way to flatten boards that are wider than my 15" planer. In light of this, I am considering getting some 50 grit paper to make the job go faster. I have not used paper that coarse, but am told by others that it makes heavier stock removal jobs go much faster.

While I am aware that drum sanders aren't thickness planers, lately I have been collecting more and more large slabs and figured woods that would either not fit or be ruined by the planer. The potential of these pieces is great for unique pieces of furniture. Abrasive planing is an alternative to allow me to incorporate these slabs in to more projects. I suppose I could get some hand planes and learn a few new (old?) tricks, but I am addicted to electrons.

FWIW,

Grant in Iowa

Re: Which Grits would you buy???

#6

I Agree He Was A Bit Abrasive


Re: Which Grits would you buy???

#7

I like Klingspor and Ellis, but???

Barry Irby

Industrial Abrasives has rolls of the same grit for about thirty bucks less. This is for Aluminum Oxide. I think it might be cheaper to buy from IA and send Ellis a few bucks, which I need to do anyway.

Is the Zirconium stuff really worth About fifty percent more?

Re: Which Grits would you buy???

#8

Re: Stay away from Instant Grits

Bill Turpin in WNC mountains

I prefer slow-cooked yellow grits with real butter.

I like Klingspor. All sand paper is ceramic: garnet, flint, quartz, zirconium, silicon carbide, alumina, aluminum oxide, diamond, cubic boron. If it has been heated to fusing by man or nature, cooled, and broken up it is a ceramic. The "ceramic" term is marketing scam. Just because this ceramic is harder or better than another ceramic, is no reason to label it "ceramic", and therefore say it is better.

I worked in a Ceramic plant for 22 years. We used all the ceramic powders to make our ceramics, except diamond. We used diamond to saw our ceramics to size.

Re: Which Grits would you buy???

#9

Re: I like Klingspor Zirconium

Larry in nw ohio

Grant Sometimes I use my 25" Woodmaster sander as a planer. It does a good job with 40 grit, I can flatten a really kittywompem board. I lay it on a flat surface and put shims under the places that need to be shimed and the board that had more curves than a chorus line and when I`m done it`s as pretty. :) Larry

Re: Which Grits would you buy???

#10

Re: Stay away from Instant Grits

Ken Oakley Sunny St. Cloud, Fla.

You guys are a bit Corny. I prefer a bowl of oatmeal with sugar and a drop or two of extract of vanilla.

Re: Which Grits would you buy???

#11

Re: I like Klingspor and Ellis, but???

Grant in Iowa

I believe the Zirconium abrasive lasts at least twice as long as the Aluminum oxide. For me it is like using a high quality table saw blade or router bit. Better abrasive, better and easier work.

I will check out industrial abrasive, thanks for the tip.

Regards,

Grant in Iowa<---building a log arch... pictures soon!

Re: Which Grits would you buy???

#12

Instant is popular; True Grits are on the Wayne


Re: Which Grits would you buy???

#13

True grits are still good with Pepper