We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I am helping a friend make a box out of some Tigrillo he had. As soon as I started ripping the first board I noticed that the dust from this stuff smells horrible, and it burns my throat and eyes, it honestly felt very similar to CS gas. I really need to get a dust collector. From now on I am wearing my gas mask when I work this stuff. Are there any other species I should use more caution with when working?
That would include any wood with "Dalbergia" as part of its botanical name, Cocobolo, Kingwood, Bois de Rose, African Blackwood, Tulipwood, Camatillo and of course anything with rosewood in its name.
It is difficult to generalize. Some woods are more likely to provoke a reaction than others. Craig pointed out that 'rosewoods' are a problem but some people (me included) have no problem. or at least limited problems -- I can work with cocobolo all day and find its scent pleasant and it provokes no reaction. But there is another (purplish but I can't remember the name) 'rosewood' which will choke me immediately and do its best to close down my airways.
The joker in the deck is that it is possible to be or become sensitive to almost any wood dust. I have a friend who is sensitized to the juniper commonly called 'aromatic cedar' to the point that he cannot be in the same room with it. His sensitivity was acquired when he installed a large amount of it as wainscoting while finishing his basement decades back. Before that he just thought of it as wood he could obtain cheaply but a few hours of sanding it almost did him in.
The lesson is to be careful about inhaling any wood dust, even innocuous ones, because what is fine with your lungs now might come back to bite you the next time.