Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rotating lid ideas

Posts

Rotating lid ideas

#1

Michael Donaldson

Rotating lid ideas

Michael Donaldson

I made this box (quarter sawn white oak and bloodwood) and I want to make it so the lid pivots on one corner to open. I am trying to figure out a few things: 1) how do I make the lid firmly attached to the box and still allow it to rotate? 2) how to I make the lid stay lined up correctly when closed?

I still don't have any ideas for the first issue, but was thinking of inlaying magnets in the box and lid to keep the lid in place when closed. Any help would be appreciated.


Re: Rotating lid ideas

#2

Re: Rotating lid ideas

Stuart Hough

Maybe a barrel hinge on the corner?

Re: Rotating lid ideas

#3

Re: Rotating lid ideas

Tom Pilsbury (Chicago)

The ones I make are not as sophisticated as yours and I knock 'em out by the bunch. They swivel on a 1/4" dowel glued into the lid and pressure fit into the base. You might want to keep your lid intact and drill up from the bottom and glue in a dowel or even epoxy in a metal rod. Lining up the holes for the lid and bottom is going to be tough though. Magnets sound like a good idea to keep it aligned when closed.


Re: Rotating lid ideas

#4

Re: Rotating lid ideas

Yonak

Michael, I like your idea of the magnets. ..Maybe a pair of barrel magnets that touch in the middle of one side and a pair that don't quite touch in the middle of the opposite side. The lid would swivel on the pair that touch and stay aligned with the other pair.

Re: Rotating lid ideas

#5

Re: Rotating lid ideas

Dave Paine

I like the barrel hinge suggestion for the swivel, also fixes the swivel axis. The dowel idea would work, but may get loose over time.

Two barrel magnets for the closure mechanism will get close, but not prevent movement and may not close perfectly aligned.

Your box is completed. I think a notch on the lid and rabbit on a side of the box would have helped the alignment for closed position.

Re: Rotating lid ideas

#6

Re: Rotating lid ideas

John Veerkamp

Ditto the magnets for closure. For pivot, a brass rod works great. Drill the appropriate size hole in the lid. Insert a nail cut off just longer that the depth of your hole and align the lid, press the nail into the body to mark the placement for the rod. Drill the bottom hole and glue the pin into the bottom.

Re: Rotating lid ideas

#7

Re: Rotating lid ideas

Yonak

Michael, I've had some very good luck with rare earth magnets lately. I wouldn't dismiss them out of hand as a viable solution. I think there's a good chance they could do what you want done.