Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

WC Weekend Accomplishments......

Posts

WC Weekend Accomplishments......

#1

WC Weekend Accomplishments......

Dennis E Peacock

3 Oct 2011

Good Morning Everyone,

I'm totally loving these cooler temps and have fallen in love with fall once more. the cooler temps have brought to me a new desire to get back in the shop and make some things that I've been needing to make for some time now. However, I do have a veneer repair job that the family doc wants me to do for him so....I'll be asking around for tips on what all I need to do in order to make the repair.

I still have a few more trips to Alabama to help my mom with more things that need to be done in order to bring further closure to the passing of my dad. Mom and dad were married for 53 years. Dad was 19 when they married and my mom was 15. Needless to say....my mom is totally lost without my dad and I'm doing all I can to fill as much of that gap as possible.

Thanks again for all your thoughts, prayers, and emails. Greatly appreciated.

Well, that's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments......

#2

Used Up Scrap/Built A Toolbox/Cleaned Shop

George Colonel's Workshop-Havertown PA

Good Afternoon Dennis,

Before I brole down the P+C dove tail jig and de-configured two P+C 690 series routers, I decided to use some 1/2" poplar left over from drawer making. I acquired a HF 23 ga pinner which needed an obligated tool box to share with its back-up pinner, oil, pins and hex wrenches. As everything was already set up from the drawers, all I had to do was size the tool box sides and ends. It all came together perfectly, inset a luan plywood bottom and applied a poplar top. That was fun: no hassles and no worries.

SWMBO was screaming at me "to get that @#$%&## shop cleaned and DUSTED" while brandishing a rusty hatchet. Compliance was prudent, if time consuming.

There was no family party last night. I had another gout flare start up and the Eagles performed terribly. That put the cabash on the weekend.

I'm glad you are feeling better and enjoying life more, Dennis. You went thru a long spell. Have another great week.

George

Re: WC Weekend Accomplishments......

#3

Sort of a coup.

Gary Smyth

As you may know I'm a die hard house sale goer. It's Autumn and house sale season. This Saturday it was all I could do to pull myself out of bed for the 7:30AM openings. It was almost daylight, pouring, I mean pouring rain, AND the first honest jacket weather of the Fall. Anyway, started out with a thermos of hot tea and then I pulled up to the house that advertised "tools". I was not the first one there. Most of the stuff that was to be outdoors was crammed into the front of the garage. There were several freezer bagged/plastic covered items that were simply identified as "old" and priced about $100 over what the going price for what similar items those of us who go to these things see. They were so over priced that several of the guys I normally see at these sales gave each other glances, smirked, and turned away. I was about to take their cue and do the same when covered in rain dotted plastic I saw the rather newer jointer and planer. Usually at these types of sale if it's covered it means it's out of the sale but I saw a tag. $75 on each with a note to see owner. What the hey....... I wasn't sure that what I saw, I saw so I asked for the owner. An elderly gentleman with what appeared to be a heavy case of Parkenson's appeared. I asked about the sign on the jointer and planer. His first question was if I would use the items? I assured him that they would indeed be tuned, used, and cared for. He asked if I was going to haggle the price. I said that if that is what was what he wanted for them I'd pay. We shook hands and while our hands were still together he repeated that he wanted these to be used. I assured him again. Both are now in my garage as his adult son's (3) who didn't want them wrapped them in blankets and a tarp and delivered them to my home (10 miles away) within an hour. It's been raining ever since so Saturday will be the day for clean up and adjusting. Question: Would 5" x 1 1/4" casters be a suitable stable platform for the stands? It will raise the machine 5 3/4" (the height of the caster and 3/4" plywood) from where they are now, but will it be stable with that big of a caster? Oh, and by the way. I liked that he was concerned that the tools would be used. I got the strong impression that he was more concerned with use than price. Good for him!

Re: WC Weekend Accomplishments......

#4

Re: WC Weekend Accomplishments......

Jerry Roberts

Just finished 3 christmas presents for my 2 daughters and 1 dau in law. I made 3 walnut cutting boards and got a jar of Chapham's Beeswax and salad bowl finish as someone on this site suggested. With 2 coats and a good buffing they turned out pretty good. Now I have to make a lazy susan for my sister. Im not sure what kind of wood because her dining room table is light so I think walnut might be too dark. Oh well, another trip to Woodcraft. I couldnt decide today on the wood type. Love this Fla weather...now.

Re: WC Weekend Accomplishments......

#5

Re: WC Weekend Accomplishments......

Larry in nw ohio

Hello Dennis Yes it`s a real bear after a death, especially trying to get things figured out and it only takes one member of the family, especially when there are only two, to really screw things up and drag things things out. It can take a big chunk out of the inheritance just for lawyers. I hope the best for you. Saturday was a down day for me, had to sleep all day to rest my kidneys and Sunday I helped a friend cut some firewood, boy that is fun, I always loved doing that. But that was it for the weekend. Larry

Re: WC Weekend Accomplishments......

#6

I had lunch

mdclor

with Bruce, a MN Galoot. He & LOHL were in Albuquerque to see the hot air balloon festival. So we took the opportunity to meet and get to know each other a little. We had a good time talking "wood". :) I am sorry that there weren't more Abq woodworkers available to join us.

Re: WC Weekend Accomplishments......

#7

Hay, hay, and a bit more hay

Gary Camp, Bend Oregon

Saturday Lisa and I cleaned up space in the barn to fit 5 tons of hay that we loaded, hauled and stacked in our own small barn. Cleaned up Juniper trees and started whittling away at the firewood chores. Sunday was a day for roof repairs after last winters woodstove installs. I woke up to rain this morning so I guess not a day to soon. We had a bit of snow at work today, at about the 7500 foot level, supposed to be off and on for the next 3-4 days. I am not ready yet.

glc

Re: WC Weekend Accomplishments......

#8

Re: Sort of a coup.

Lee Schierer McKean, PA

I have 2" casters on my jointer and it moves just fine on my wood floor. 5" might not be big enough on your gravel floor. One problem with casts is that the jointer can move when pushing boards through the cut. I put a pair of toggle clamps on the front side of mine that lift the front casters off the floor putting the weight on the clamp pins which pretty much stops the rolling, Again I'm not sure how that might work on a gavel floor.

Lee

Re: WC Weekend Accomplishments......

#9

Barb Siddiqui

A suggestion

Barb Siddiqui

if the man is only ten miles away, go back one day and offer to drive him to your place so he can see his tools in place and cared for. You might be doing something beyond your imagination just to let him stand in your shop and chat for a few minutes!

Re: WC Weekend Accomplishments......

#10

Barb Siddiqui

Re: Hay, hay, and a bit more hay

Barb Siddiqui

Hi Gary- sounds like you got that hay in just in time! We're chainsawing orchard cherry limbs and building a woodpile, too. I was hoping for two full months of mild fall weather, but it feels like it's going to hit real soon with real cold! Have a great ski hill season.

Re: WC Weekend Accomplishments......

#11

Kneale Brownson

Hung my wife's painting for last year's Xmas card

Kneale Brownson

For which I made a frame from some mahogany I found in my barn in Michigan. The painting is in our dining room in Breckenridge, Colorado.


Re: WC Weekend Accomplishments......

#12

Re: A suggestion

Larry in nw ohio

Gary That sounds like a great idea. I bet he would jump at the chance and it would give you a good feeling. Let us know what happens.Larry

Re: WC Weekend Accomplishments......

#13

Re: A suggestion

Gary Smyth

Barb and Larry

It is a good idea.

This was a house sale so all I have is the address and I think the former owners first name. What I remember him called most, "Dad", wouldn't be appropriate. These sales sell by cash only so I don't have a check stubb. I remember the house location and I get around there reasonably often during the weekends in my never ending search for yet more stuff. I'll make my attempt in a couple of weeks after I get the planer and jointer set up and on a stand I can move around. I'll take my chances he doesn't shoot the "stranger" at his door.

Re: WC Weekend Accomplishments......

#14

Re: Sort of a coup.

Larry in nw ohio

Gary If he does shoot when he opens the door, I know where he can get a nice planer and jointer fairly cheap, if he doesn`t haggle. ;) :) :) Larry