Framed Counted Cross Stitich
Moses Yoder
I made 2 frames recently for my wife to enter some of her cross stitching in the county fair. They are built out of 6/4 white oak that was planed to 1-1/4" thick then turned on edge so the front looks rift sawn. The finish is an onyx stain with conversion varnish top coat.
The first picture is a dragon. I used beveled glass for this frame.

The second picture is blackwork, I think she called it a blackwork garden. This is the one I used the glare free glass on, and it turned out fine.

The third picture is the back of the dragon. Judges also want to see the back of the work, so there is glass in the back. I left gaps in the corner for air movement. The stitching is laced onto an interior frame so there is no tacky board or anything that will ruin the stitching and you can see the back.

The last picture is a close up of one corner of the frame.




