Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Wood selection for drawers

Posts

Wood selection for drawers

#1

Wood selection for drawers

Joe W Detroit, MI

I am currently working on an entertainment center for which I need to make 4 drawers. I was going to use some ash that I have, but it' not in the best of shape and the grain is really wavy. The drawers will be 19 inches deep, 10 inches wide and 8 inches high. It seems that Poplar is often suggested, but I haven't been able to locate any that is not green in color. Any other suggestions for something straight-grained and fairly easy to work. The case work and trim is Mahogany if that makes any difference.

Re: Wood selection for drawers

#2

Clint Searl

Re: Wood selection for drawers

Clint Searl

1/2" Baltic birch. Make it any color you want.

Clint

Re: Wood selection for drawers

#3

JL

Re: Wood selection for drawers

JL

Soft maple, birch (Baltic or not) any other "neutral" colored wood without much pores.

Re: Wood selection for drawers

#4

Clint Searl

I meant Baltic birch ply


Re: Wood selection for drawers

#5

Re: Wood selection for drawers

Dick Coers

I like soft maple. Just leave that poplar in the sun for a few days, that green will turn to tan.

Re: Wood selection for drawers

#6

depends on the kind of drawer

Bill Tindall

For a traditional drawer where the drawer slides on a runner, a softer wood drawer and an hard runner is preferred for future repair reasons. But for a hardware hung drawer anything works fine. If the ash is straight no reason to avoid it.

Green poplar heartwood is fleeting. Oxygen and light will soon make it brown.

The guide block in this picture is reclaimed poplar from an old drawer. Note how dark it got. When fresh it blooked like the rest of this drawer.

Re: Wood selection for drawers

#7

Re: Wood selection for drawers

FredD

Plywood drawer boxes on Furniture will look like mud flaps on a Cadillac.

FredD

Re: Wood selection for drawers

#8

Re: Wood selection for drawers

FredD

Joe , I like soft Maple and Quarter sawn Sycamore when I can find it , especially the Sycamore , but Ash works fine if it's flat.

FredD

Re: Wood selection for drawers

#9

Re: Wood selection for drawers

Larry in nw ohio

If you want poplar, I have a bunch left from another project. If you can get down this way, Ottawa, Oh sometime, I`d sell it fairlly cheap. I bought it from Frank Miller Lumber. Larry

Re: Wood selection for drawers

#10

Re: Wood selection for drawers

Yonak

What's wrong with mud flaps on a Cadillac ? ..Especially if it's also got fender skirts and curb feelers . . .

Re: Wood selection for drawers

#11

Re: depends on the kind of drawer

Joe W Detroit, MI

That may be the ticket after all. Drawers will be mounted on store bought runners. They will have a Mahogany front on them, so the wood so of course they won't be visible until opened. I wasn't aware that poplar lost that green color over time. should have known, everything else does.

Re: Wood selection for drawers

#12

Re: Wood selection for drawers

Joe W Detroit, MI

I can make the flat, its just the wild grain that is turning me off about using it. The best boards I have would aren't wide enough and would need to jointed and and larger panels glued up and I am afraid the wavy grain in the pieces I have would be pretty ugly. I guess it's kind of silly to fret about something that isn't really going to be seen, but I have got so much invested in the piece right now, I trying to get to perfect the best I can.

Re: Wood selection for drawers

#13

Re: Wood selection for drawers

FredD

Since your case work is Mahogany, aSoft Maple or Sycamore drawer box would really go well, if you looking for a attractive wood,even though it is less expensive and easy to work , I wouldn't put Popular next to it , regardless of the color it finally assumes, but that's just me.

FredD

Re: Wood selection for drawers

#14

poplar with mahogany

Bill Tindall

Almost every piece of American fine furniture built from mahogany from the early 1700 to near modern times had either poplar or pine drawer sides. These pieces showcased the visible design, carving, etc. The insides were purely functional. I think making the insides of furniture something other than functional is a relatively modern concept. Nothing wrong with following modern fashion, but no one should be ashamed of a drawer built like those of the 18th century masters.

You can keep drawer-poplar brighter by shellacing it. I like a shellaced drawer in any case. They feel and slide better.

Re: Wood selection for drawers

#15

A vote for hard maple

PaulSV

I use hard maple for drawer sides and internal parts like drawer runners on case goods, which I usually build with cherry. I look for straight tight grain, and a uniform white color. It is very strong and stable, and I like the way it works. Hand cut dovetals are a bit more work than with a softwood, but you can get nice crisp clean edges on the tails. It's more expensive than a soft wood, but it's not like I'm doing production runs.