Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Drill Press Table

Posts

Drill Press Table

#1

Drill Press Table

Larry in NW Ohio

Does anyone have the woodcraft magazine issue from this month or last year at this time that has a nice drill press table plan in it. If so could you let me know which issue it is for sure so I can try to get it. I`ve been trying to look on the net, but I can`t find anything. Thank You. Larry

Re: Drill Press Table

#2

Re: Drill Press Table

del schisler

Larry i did a google search and found this . Check it out look's like lot's of info Just cut and paste this

http://www.google.com/#sclient=psy&hl=en&source=hp&q=drill+press+table+in+woodcraft+magazine+&pbx=1&oq=drill+press+table+in+woodcraft+magazine+&aq=f&aqi=&aql=&gs_sm=e&gs_upl=11344l11344l4l13875l1l1l0l0l0l0l29

7l297l2-1l1l0&bav=on.2,or.r_gc.r_pw.&fp=d78f8546f42852d9&biw=991&bih=567

Re: Drill Press Table

#3

Re: Drill Press Table *LINK*

Don Evans

Larry:

They have all the plan's on their web site that you can order or download. They do charge a small fee depending on the plan $3 to $5 or so.

www.woodmagazine.com

Don


Wood Magazine

Re: Drill Press Table

#4

Re: Drill Press Table

Larry in NW Ohio

I saw this table and really like it. I`d like to find the magazine, but I just can`t find it yet. It`s the latest issue of woodcraft, Feb.-March. If someone would have that, could you email it to me. Tahnk you. Larry

Re: Drill Press Table

#5

Re: Drill Press Table

Charlie Lenz

For $7.50 you can order one from WOODCRAFT, wouldn't that be the right thing to do ?

Re: Drill Press Table

#6

Re: Drill Press Table

Charlie Lenz

It took me about a whole two seconds to find. http://www.woodcraft.com/Product/2082717/33445/Woodcraft-Magazine-Issue-39--February--March-2011.aspx

Re: Drill Press Table

#7

Re: Drill Press Table

Larry in NW Ohio

Charlie Yes it would be but I refuse to buy the magazine and pay $1.50 for something they call excess weight postage. It wasn`t the postage as the excess weight that I can`t get over. I`ll just keep looking around and see if I can find the magazine. If not I guess I`ll do without. Larry

Re: Drill Press Table

#8

Woodcraft  Drill Press Table *LINK*

Stuart Johnson

Is this the one?


Woodcraft Drill Press Table

Re: Drill Press Table

#9

Re: Drill Press Table

Dale Penkala

Hi Larry

I have the issue right in front of me and yes it is the Feb/Mar issue. Vol 7 #39. I actually made this table for my drill press with some modifications to it and I absolutly love it. I didn't go with the extension wings, side system or the cut out in the middle and made a pull out shelf with holes to fit the shanks of my most commonly used bits. Also made the fence a little taller and if I could do it over again I'd go even and extra 1/2"-3/4" taller yet.

I don't have any good pix of it otherwise I'd post it for you. Willing to do if your interested.

Hope this helps!

Dale

Mid-Michigan

Re: Drill Press Table

#10

Re: Drill Press Table

Larry in NW Ohio

Dale Yes that is the issue Feb/March, Tricked out drill press Table. I wish I could find that issue of the Mag. but it just doesn`t seem to be around. But we`re going shopping this weekend to a couple places and they may have it. Larry

Re: Drill Press Table

#11

Re: Drill Press Table

Dale Penkala

Larry if you don't find it just PM me and I'll send you a photo copy of the article.

Dale

Mid Michigan

Re: Drill Press Table

#12

Re: Drill Press Table

Larry in NW Ohio

Thanks Dale, I`ll let you know Sat. or Sun. Larry

Re: Drill Press Table

#13

Re: Drill Press Table

Dale Penkala

Sounds good Larry!

Dale

Re: Drill Press Table

#14

Post It Larry.  I'm Interested also


Re: Drill Press Table

#15

Re: Post It Larry.  I'm Interested also

Larry in NW Ohio

I`ll get it to you ASAP. Larry

Re: Drill Press Table

#16

Re: Post It Larry.  I'm Interested also

Dale Penkala

Not sure if this is what you ment or not but here it is. If it wasn't sorry.




Re: Drill Press Table

#17

Thanks, Larry.  I Like It


Re: Drill Press Table

#18

Colonel

Larry in NW Ohio

I didn`t post that, but Dale did. Dale that is it but if you end up sending it to me I`d like the whole article if you would.We are going to a bigger city tonight with a bigger book store so I`ll let you know Saturday if I find the magazine. Thank you. Larry

Re: Drill Press Table

#19

Re: Colonel

Dale Penkala

Hi Larry

Ok thats not a problem. Just let me know and I'll copy it and send it out. Just need your address and we'll get'r done for ya!

Dale

Mid-Michigan