Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Sawyer Term For Cut & Stacked In Order Of Cut

Posts

Sawyer Term For Cut & Stacked In Order Of Cut

#1

Sawyer Term For Cut & Stacked In Order Of Cut

charlie belden

I bought a 6" long, 16" diameter Bradford Pearl log, stacked and stickered in the order the boards were cut then steel banded. With the exception of the board through the middle of the log, the pieces are 6/4,the center slice almost 10/4s.

There is a term for this stacked in order of cut thing that, as I recall, probably from a Krenov book, called en bol or en boll or en bolle or en boulle. I've google all those terms and came up with nothing applicable. Does anyone know what the ACTUAL term is for this cut and stack in order thing?

Re: Sawyer Term For Cut & Stacked In Order Of Cut

#2

Re: Sawyer Term For Cut & Stacked In Order Of Cut

Sgian Dubh

Boule. Use a term along the lines 'boule milled log' in a web search. Boule is a well known and common term here in Europe. It comes from French. Slainte.

Re: Sawyer Term For Cut & Stacked In Order Of Cut

#3

Re: Sawyer Term For Cut & Stacked In Order Of Cut

Robin Corell in Atascadero CA

A bole is the part of the tree trunk from the ground to just below the first branch, it the part of the tree where the premium lumber comes from.

To mill a log they way you are describing is to mill it through and through. Not sure what the term would be for stacking it the way you are describing. To me it was common sence and it is how I have always stickered and stacked my wood, sans the metal bands.

Robin

Re: Sawyer Term For Cut & Stacked In Order Of Cut

#4

Re: Sawyer Term For Cut & Stacked In Order Of Cut  *LINK*


woods/flitch

Re: Sawyer Term For Cut & Stacked In Order Of Cut

#5

Re: Sawyer Term For Cut & Stacked In Order Of Cut

Sgian Dubh

Here are some boules of 'Character' oak at the later stages of air drying in a shed at one of our local timber merchants here in the UK. The final destination of the wood I believe was on car dashboards, door trim, and wherever else the manufacturer wanted characterful bits of trim. Slainte.

Photobucket