Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Motor going wrong way(OT)

Posts

Motor going wrong way(OT)

#1

Motor going wrong way(OT)

Larry in NW OHIO

A while back I post for help to hook up a samll to speed motor to a High-low switch. I got it hooked up and workes well but in one of the speeds it goes in reverse. Before some suggest it yes the switch is two speed. It was hooked up to a two speed motor awhile back. Also there is nothing on the scymatic on the motor about being a reverse in it. So I suppose it could only be in the switch? Before I go tearing into it I want to check with someone who knows more. I did notice on the switch that there is a jumper wire from one connection to another. Thank you. Larry

Re: Motor going wrong way(OT)

#2

Re: Motor going wrong way(OT)

Bill Turpin in WNC mountains

What is model and make of motor? A picture of connections on the switch and motor would be very helpful.

Re: Motor going wrong way(OT)

#3

Re: Motor going wrong way(OT)

Larry in NW OHIO

Bill Bac on 7/19 I posted a Pic of what you may need. It`s came out of a microwave I think, Larry

Re: Motor going wrong way(OT)

#4

Re: Motor going wrong way(OT)

Bill Turpin in WNC mountains

Is this the turntable motor? Most MV ovens alternate their rotation every cycle. Open the door and restart, it will reverse its rotation. Do you have the original wiring diagram from the MW. The reversal could be internal to the motor or from a circuit board. Try switching on/off/on/off and see what happens. The reversal is to give better uniform food cooking.

Re: Motor going wrong way(OT)

#5

Re: Motor going wrong way(OT)

Larry in NW OHIO

That`s a good idea, but no cigar. the motor runs a pair of fans, one on each end.But I`ll still check on your suggestion, but may need to wait till tommorrow. I`ll give more info then, I`ll try different things and look at the motor more, Thanks Larry

Re: Motor going wrong way(OT)

#6

Re: Motor going wrong way(OT)

Larry in NW OHIO

Well Bill I found out something, I have the wrong switch. But I took it off of different two speed fan, so that totally confused me. I took the wires off the switch and it runs the right way when hooked to just the power cord. Thanks for the suggestions. Larry