We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I am fortunate to have a young man (20 yrs old) who comes once a week to help me with the heavy lifting. He is trying to outfit his own gara..err...shop. He admits it is a mess and he doesn't really know how to sort and organize things.
Like most shops, it isn't just woodworking, but a little plumbing and electrical stuff. Odds and ends of supplies. Zach keeps his grandmother's and mother's houses in working order.
He wants to learn all he can about woodworking so there will a few more acquisitions in that area. I am planning on moving and likely will make an assorted donation.
Let's hear your methodologies and philosophies from your experienced point of view. As an example. do all the wrenches go on one wall or do you store them near the supplies you would use them with? Do all the supplies (wood, paint, finishes, hardware, etc.) live in one area? Discuss the merits of shelves as opposed to drawers. You get the idea.
He is a good kid and I told him that you folks would have tons of ideas for him.
I always find these questions mystifying. It would be presumptuous for me to recommend to someone where to put nails. Shop's self organize to suit the style of the owner. I think the best advice is get to work. Acceptable organization will evolve.
How you store things depends on the space available. My shop has almost NO wall space, therefore I have to have drawers for storage. I'm not one of those that has to have everything neatly stored. My screwdriver drawer probably has 100 screwdrivers, but they are all in one place and I can find any I want.
Use lots and lots and lots of shelves. Store vertically because floor space is critically valuable.
Put up a peg board and paint it white. Fill it with the most commonly used tools. Outline each one with a Sharpie and label it. Easy to see when something is missing and you can instantly tell exactly what it is that's missing.
Hang stuff from the ceiling like they do in fancy kitchens.
Each machine has its own toolset. Never remove a tool from the machine. House tools are separate from shop tools.
Force yourself to make a habit of putting away a tool exactly the same every time. Every tool has a place. Big time saver.
Use a tool cart with a power strip. Very handy if you have the room for it.
Keep a screen handy in case you need to sift sawdust to find a dropped nut or something.
If someone borrows a tool and doesn't put it back exactly like they found it ban 'em from the shop forever.
I agree with Bill. This really is a "how high is up" question. Organization is personal and shop organization may be more so. Sometimes its a matter of money. Maybe its always a matter of money. For instance, a friend gave me a bunch of sink cutouts out of plastic laminate counter tops. they are about 20 by 30 inches. I have made numerous things out of them. I also had a bunch of aluminum strips that were about an inch wide and a 1/4" thick. I made cabinets out of some of the sink cutouts. Cut slots in the non laminated side and epoxied the strips of aluminum into them to make drawer slides. My friend also bought thousands of drawer sides at and auction for pennies a piece. He gave me the rejects and I cut them down and used them for my cabinets. I scavenged plywood paneling for drawer bottoms. I cut up another cutout for the fronts. So, I have three colorful cabinets with an assortment of drawers. They have served me well. some of the drawers have little compartments and they are filled with ....stuff. One drawer has electrical stuff and another plumbing and several have nails and bolts and screws. One cabinet has mostly hand tools and the other mostly power tools.
So, I did not have lots of money, but I had tools and skills and access to castoffs, and made something out of the combination.
The arrangement of tools is important. the leading edge of the TS blade is 16' from the back wall and about five feet from the garage door. So, I can rip 16' boards, but I have to open the garage door if anything is over about five feet.
I set my planer up on a roll around cabinet so the top of the planner is the same height as the bandsaw table. It can be an infected or outfeed table, but best of all, it is not in the way.
The Chop saw, shaper, and RAS share a fence. The jointer serves as a right hand support for the RAS.
There is certainly no standard answer to your question. There are hundreds of shops represented on WoodCentral and I bet the differences are more striking than the similarities. All of them have some right things and all of them have something that could be improved.
OH! One of my favorite storage solutions in my shop is that I have a corner for tall skinny things. Paint pole, sheetrock square, moldings, dowels, the old rails off my TS. Anything tall and skinny. What ever works.
I have exactly two wrenches stored with their respective machine tools: a hex wrench attached to the bandsaw with one of Rob Lee's magnets, and the collet wrench for my router, which usually resides in the router table. All the others stay in a row on the adjacent wall because they are shared with a bunch of things, including my motorcycle, which doesn't fit on a wall very well.
it never stops....do not be afraid to re-organize that which you already thought was organized....this is a personal thing and you will have to determine if you are like me and find that an organized shop is a thing of beauty....its a pleasure knowing where everything is....and at the end of the day its kind of nice to take a moment and enjoy looking at your tools, jigs, supplies and the order you have brought to this part of your world.
Finishes and stains live in a metal cabinet. If all you can get is a file cabinet, then so be it.
I like drawers.
I have a drawer unit near the drill press. All drilling equipment lives in that drawer unit including hand drills, bits, braces, sanding drums, Forstner bits, etc.
I have two drawer units near my work bench. All hand tools live in those drawers.
I have a drawer unit incorporated into my lathe - lathe accessories live there.
I have measuring implements on my wall (squares, triangles, rules, etc.). My clamp guides also live on the wall.
I have a few other hanging things.
Story sticks hang near my lathe.
Band saw blades hang near the band saw.
Basically - he should try a few ideas and see what works for him.
I'm a fan of upper cabinets with doors and lower cabinets with drawers. Lots of them. Horizontal surfaces like tablesaw tops and shelves are magnets for clutter mixed in with sawdust. Doors and drawers should all have labels showing the contents. You can never have too many but the location is very important. If it's not handy to replace a tool it'll get laid down or put in the wrong place. Then the hunt starts.
Unfortunately I rarely follow my own advice. As a result any project takes at least 10 percent longer because I'm always looking for something.
I suggest he buy a book called "The Workshop Book" and read it. It gave me lots of ideas. The thing is though, if you make a place for everything, where do you put the stuff you add in over the years? I have started throwing my tools up to the ceiling, and if they stick on the ceiling I find a place to put them away. If they fall back to the floor, I just leave them there.
if you have back issues of FWW, there is a great article by Matthew Teague in the Tools and Shops issue, 2002. It is entitled "Smart Shop in a One-Car Garage." It is loaded with great ideas and pics of how he dealt with organization in a small space.
If it's a tool I use a lot, I store it near the area that I will be using it.
If it's a tool I don't use frequently, I store it with other tools of that type.
For example, I keep the planes that I use most often on a storage rack right at my workbench, along with the saws and chisels that I use most often. I have a number of specialty planes that I don't use as much, and they all sit on a separate shelf that's a little less convenient to get to.
That is exactly what I had hoped I would get in the way of responses. Why you do the things you do. Examples of how are great but they don't reveal much about the why you do them that way.
Zach will decide where things need to go when he has some direction with regard to how he thinks about the situation. Woodworking like everything else, is not just a materiel process; it is also a thought process. Monkeys can imitate each other, but original thought is another matter.
Not that seeing examples is a bad thing. I will pass on the other suggestions, but I really want for him to think for himself.
Thanks for your response. It will give him something to think about. In my teaching of him, I tell him why I do things a certain way. It will help him to learn how others think as well.
in three dimensions. Tell him to think about what he will be doing and how the work will flow through the shop. For instance, I have a small shop and have to be careful with plywood. A full sheet looks like an aircraft carrier in there.
Its important to realize that you might have long pieces or wide pieces and the tops of things might work better if the are in a plane. Or if things will pass over or under each other nicely. For example, the top of my planer is level with my bandsaw table (mentioned earlier) but the stock passing through the planer can go under the work bench on the in feed side and under the wing of the table saw on the out feed side. I have a small shop, but I suspect this type of forethought always pays off.