Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

OT: Globalization, I did my bit.........

Posts

OT: Globalization, I did my bit.........

#1

Jesper, Denmark

OT: Globalization, I did my bit.........

Jesper, Denmark

New Lawn tractor/mower. Based on quality, size, price and availability a Craftsman 24 HP Vee-twin followed me home yesterday. On the trailer of course.

I had really anticipated that the Craftsman brand was some knock-off, as Sears are not present here in Europe. But alas, no, Genuine Sears product, assembled in the USA; Briggs and Stratton engine made in the USA and battery even made in the USA.

It just goes to show that manufacture in the USA at competitive price for export is possible.

About 90% of the small engines for this kind of use, sold here are B&S, with some Kohler and Honda/Yamaha at the higher end.

Re: OT: Globalization, I did my bit.........

#2

Re: OT: Globalization, I did my bit.........

Chuck in Mtl.

I never realized Sears were in Denmark.

Re: OT: Globalization, I did my bit.........

#3

Moses Yoder

Re: OT: Globalization, I did my bit......... *LINK*

Moses Yoder

Unfortunately, nothing is made in the USA any more. We run hot dog stands (such as McDonalds) and train technology experts for other countries. That's pretty much it for our economy. See link.


Where is the V-Twin engine assembled?

Re: OT: Globalization, I did my bit.........

#4

Jesper, Denmark

Re: OT: Globalization, I did my bit.........

Jesper, Denmark

The link shows horizontal shaft V-twin engines assembled i Japan. Lawnmower and garden tractor engines have vertical shafts and are fully assembled in the USA plants.

Re: OT: Globalization, I did my bit.........

#5

Jesper, Denmark

Re: OT: Globalization, I did my bit.........

Jesper, Denmark

They are not, but sell their garden tractors and lawnmowers through wholesalers, just like other manufacturers.

Re: OT: Globalization, I did my bit.........

#6

Moses Yoder

Re: OT: Globalization, I did my bit.........

Moses Yoder

So your twin cylinder 24 horsepower riding lawn mower has a vertical crank shaft? It would be worth a trip to Sears to see how they did that.

Re: OT: Globalization, I did my bit.........

#7

assembled in the USA

Phil Joines

Where are the parts MADE?

Re: OT: Globalization, I did my bit.........

#8

Not Being a Seersucker Suits Me

George@Colonel's Workshop-Havertown PA

Re: OT: Globalization, I did my bit.........

#9

JL

I didn't know that anyone had big enough lawns....

JL

to require a lawn tractor in Europe :b . I thought if you had a large enough lawn to require a lawn tractor you had some sort of grazing animal :D that did the job for you.

Just kidding. I have a friend in Wales who has a couple of acres.

Re: OT: Globalization, I did my bit.........

#10

Re: OT: Globalization, I did my bit.........

Grant in Iowa

Moses,

In general, the newer lawn tractors all have vertical shafts, regardless of # of cylinders or HP ratings (to a point). Especially true of department store units

Garden tractor and heavier class machines tend to be the ones with a horizontal shaft, though not always.

From what I have seen, the majority of what Sears sells is of the vertical shaft belt drive variety.

This is why I have a Kubota BX 2200(which, curiously enough was made in Georgia). And equally curiously, the modern JD equivalent is almost entirely made in japan...

FWIW,

Grant in Iowa

Re: OT: Globalization, I did my bit.........

#11

Re: OT: I have that engine in my

Dale Stansbery

Husky lawn mower. The starter is anemic. It starts ok cold, but sometimes when warm it won't turnover against the compression. I put a higher CCA battery in it to no avail. If you have to get off for a couple minutes to move something, attend to nature, or whatever, you'll be better off disengaging the mower deck, setting the brake and letting it idle. I'm making an assumption here that mine isn't defective, just under engineered.

Re: OT: Globalization, I did my bit.........

#12

Re: OT: I have that engine in my

Larry in NW OHIO

I had something like that years ago. The problem at that time was the starter was weak. IIRC I think the armature bearing was wore and slightly rubbing the field. Larry

Re: OT: Globalization, I did my bit.........

#13

Jesper, Denmark

Re: OT: I guess I'm a little surprized......

Jesper, Denmark

Here I thought it was a bit of a sunshine story - about a successful US company, largely manufacturing in the USA and being quite successful in exporting US manufacture goods elsewhere.

I might even have expected a little pat on the head for buying a US product?

Instead there was largely (but not completely) negative comments, questioning the product, the company and where manufactured.

That was not the Yankee ingenuity and "can do" attitude I admired so much when first sent to Chicago in 1970.

What the heck happened??

Re: OT: Globalization, I did my bit.........

#14

Re: OT: I guess I'm a little surprized......

Robert R. Clough

I'm with you. I understand Simplicity is still made here in the USA, just up the road in Port Washington, and the John Deer has a plant several miles to the west. I also understand that the Jap made engines are for machines NOT sold through JD dealers, but through Home Depot and the like.