We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
What would be fair value for a sander like this? It is a 1/2 hp large frame motor that works and is on a stand with a air force tag on it. I can only find info on the oliver brand 15 inch sander
I gave $350 for mine (about eight years ago) and felt like it was a good deal. A half-horse motor sounds inadequate on a 15" sander, but mine works fine. It's a repulsion-induction type motor.
It used to be that for industrial disc sanders the used price was $100/ inch in diameter. deduct a little for sanders less than 20" and deduct for poor condition. The market for used tools is a bit depressed right now so I would guess anything less than 1K for a 15" in good condition would be a fair price.
The Porter cable is supposed to be a stand alone floor tool but they sometimes show up without the lower stand. They also have a dust collection system built into them but if the lower and upper guards are missing it wont work very well.
They are a good quality tool but they are also pretty old, most of the ones I have seen date back to the 40's, and if the motor goes you have to have it rewound rather then just replacing it. But they are worth fixing up and they are acurate.