Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Woodturning Workshop with Tim Yoder

Posts

Woodturning Workshop with Tim Yoder

#1

Woodturning Workshop with Tim Yoder

bryan crain

My name is Bryan Crain and I worked(camera, graphics, editing, promotions) with Tim Yoder on the PBS show Woodturning Workshop.

The show was recently canceled but Tim and I hope to bring it back someday soon.

In the meantime we have started a website (www.woodturningwithtim.com) and produced a new full length DVD "From Tree to Bowl" available for purchase on the site.

We have several free video shorts available as well and are working on our next DVD.

Everything is basically the same as woodturning workshop.... the only difference is we had to drop 'workshop' from the title for legal reasons.

We appreciate all the support the woodturning community has given us over the past 6 years and hope you visit our site.

FYI...Woodturning Workshop was recently nominated for an EMMY award, we find out July 23rd if we win.

thanks again for everything...

Bryan

Re: Woodturning Workshop with Tim Yoder

#2

Always enjoyed and learned from your.....

roger lance

show. Sorry to hear that it was canceled. Best wishes to you and all your staff.

Re: Woodturning Workshop with Tim Yoder

#3

Re: Always enjoyed and learned from your.....

bryan crain

thanks roger, Tim and I are the staff believe it or not. We still work for the station but we have our own equipment (and Tim's same shop of course) and are doing Woodturning with Tim Yoder as our own venture now. Appreciate the well wishes...

Re: Woodturning Workshop with Tim Yoder

#4

I was frequently impressed with your

roger lance

photography....especially where a portion of a vessel was cut away and you could actually see inside and watch what the tool was doing....bravo for that and other techniques you showed....perhaps the two of you could make nice with Powermatic, Oneway, VicMark and make a series of educational/instructional videos for them....I know you would make videos superior to most of what I've seen on YouTube (IMHO)....just know there were people out here who were learning from you and thought you did a good job.

Re: Woodturning Workshop with Tim Yoder

#5

Re: I was frequently impressed with your

bryan crain

Well thank you very much, appreciate the compliments. we hope to have it back someday...but will keep it going on the website for now. I will pass along the Powermatic, Oneway, VicMark idea to tim...we're willing to try anything right now! thanks again

Re: Woodturning Workshop with Tim Yoder

#6

my strategy there was....

roger lance

Norm was strongly affiliated with Porter-Cable and Delta (when Delta and PC were strong)....Scott Phillips is associated with Delta and Woodcraft....Rough Cut is also with Woodcraft....If Tim could become the face of Oneway, that would be a very good thing.

Re: Woodturning Workshop with Tim Yoder

#7

Re: Woodturning Workshop with Tim Yoder

Bruce, a MN Galoot

I loved this show, and definitely appreciated his approach to instruction, screw-ups and all. That Stubby lathe might be a bit out of my league, but it sure showed the realm of possibilities.