Mountain Dulcimer Plans
Barry
Does anyone know where I can get free plans for building an Appalachian Mountain Dulcimer? Or a book on building one? Thanks.
Knowledge You Can Build On — Est. 1998
Mountain Dulcimer Plans
Barry
Does anyone know where I can get free plans for building an Appalachian Mountain Dulcimer? Or a book on building one? Thanks.
(Message Deleted by Poster)
Joanne in Point Pleasant, PA
Re: Mountain Dulcimer Plans
Barry
Seriously.
I have looked at many sites on the internet and can't seem to find what I am looking for. Maybe I'm being too picky. I may opt for a kit, since this is my first attempt at a dulcimer. I will check out the sites you recommended. Thanks.
Re: Mountain Dulcimer Plans *LINK*
JL
Try one of these classes.
https://www.folkschool.org/index.php?section=class_detail&class_id=4846
Or possibly try contacting the instructor.
Mountain Dulcimer Class
Oops, didn't mean to delete post
Joanne in Point Pleasant, PA
Hmm. Didn't mean to delete that response and link.
I have made 2 mountain/appalachian dulcimers. One from a kit and one essentially from scratch (I took a class at Augusta Music Heritage one summer). For a first time, a kit is not a bad way to go. If you are making one with the hourglass curvy sides and have never bent wood like that, a kit would help that. Seems to me I built little gluing jigs, too. But I still recommend searching online and reading through some of those sites. There is a lot of info out there.
Re: Mountain Dulcimer Plans *LINK*
Dick Coers
Woodworker's Journal Nov/Dec 1985 had plans for a simple tear drop shape. They used parts from Folkcraft Instruments that is still in business. Maybe the only downside is the fret position is in fractions, and I don't find that very accurate. I think my scanner still works, so send me some contact info and let me know if you want a copy. I've made three mountain dulcimers for my wife. The first one was from a kit, the next two were custom made similar to one of Warren May's design. They combine and hour glass on the far side, tear drop on the near side. All three I made use fret boards I bought from Folkcraft.
Folkcraft Instruments
Re: Mountain Dulcimer Plans
Barry
I would like a copy if its not too much trouble. I've done quite a bit of searching, but haven't found exactly what I am looking for. My email is: barry712@bellsouth.net
Thanks.
Re: Oops, didn't mean to delete post
Barry
I saw a nice kit in Townsend, TN on a recent trip to the Smokey Mountains. It was in a shop called "Wood & Strings" which also featured dulcimers made by Mike Clemmer.
The shape was neither teardrop or hourglass, but something he called "Tennessee Violin". The sides and backs of the dulcimers were Black Walnut and the tops were either Sassafras or something called Sapele. I think that is a tropical hardwood and it looked a lot like mahogany. I thought the Sassafras was nicer. I may have to give one of those kits a try.