Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Still Able to Cane

Posts

Still Able to Cane

#1

Still Able to Cane

George Colonel's Workshop-Havertown PA

Good Afternoon Friends,

SWMBO kept it a secret until our big weekend "Dart-e-que" was over and the guests departed. The Grandchildren were gone with their parents, and life seemed quiet again. Then she told me about two chairs being damaged. One of my grandkids sneaked into our bedroom and stood on a caned nursing rocker while trying to open the doors of my pipe cabinet on ther wall above the chair. This chair is a real antique and has an integral seat. The oval caned section was all broken out. The chair back was undamaged. When I originally rescued the chair, I had to set the spline at the seat's backby working through the opening on the chair back. Then I caned the chair's back. Not sure how to attack the problem now, short of removing the cane from the back of the chair and starting over. (GROWL)

Then one of the lady guests used my dining room arm chair to sit in. She tucked her shoe under her butt as she sat down, and tore the cane in the seat. It was perfect before the party. (GROWL Again).

I'd love to raise cane with both my grandson and our guest!

I dislike caning very much, and am spending this week repairing both chairs. The only 1/2 way good thing is that I had previously converted both chairs from hand cane to sheet cane.

George

Re: Still Able to Cane

#2

Alan Young

It's A Dam nuissance Eve n if you are Able to Cane

Alan Young

Re: Still Able to Cane

#3

Re: Still Able to Cane

FredD

Well Colonel , if your still able to Cane , don't do to Cane what Cain did to Able , or something like that.

FredD

Re: Still Able to Cane

#4

Re: Still Able to Cane

Dave Paine

Sorry to hear you need to do this task.

I have a garage sale chair which needs recaning. The old cane dried out and gave way.

I have purchased the sheet cane, removed the old cane and then put the pieces aside until "later".

Any pointers for a newbie?

I have the sheet cane, spline, glue, shims, etc. I am just putting off my first time "experience".

Re: Still Able to Cane

#5

Re: Still Able to Cane

Jim Runchey

I can feel your pain, George. Just went through the same thing. Two of my grandkids were up. and when they left two of the antique chairs in the dining room were sick. Just finished recaning with prewoven.

Happy days are here again!

Re: Still Able to Cane

#6

Just say to yourself, "I Know I Cane, I Know..."

Bill Houghton, Sebastopol, CA

...I Cane," and it'll be all right. Worked for the Little Engine that Could.

Re: Still Able to Cane

#7

Check Your Email, Dave

George@Colonel's Workshop-Havertown PA

Re: Still Able to Cane

#8

Re: Still Able to Cane

roger lance

George.....I too have some chair seats to re-cane.....they're the metal tube frame dining chairs that were real popular some years ago....Crate & Barrel I think....I see that Woodcraft has the pre-woven sheets of cane and other supplies for the task....if you would give a little verbal pointer or description of the process, I and others would be very grateful as I've not done this before. Thanks.

Re: Still Able to Cane

#9

I cane, vidi, vici  *LINK*

Tom Dunlap


Veni, vidi,vici

Re: Still Able to Cane

#10

I'd be happy to, Roger

George Colonel's Workshop-Havertown PA

I just sent some notes to Dave Paine, and will try to resurrect them in my "sent mail"box. I'll review them for clarity again and post something tonight or tomorrow. Right now I have to go see the foot doctor and become declawed and decalloused.

George

Re: Still Able to Cane

#11

Thanks George....appreciate it !

roger lance