Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Advice needed: window repair

Posts

Advice needed: window repair

#1

Advice needed: window repair

Pat Evans

I just removed the old glass from the first of 14 casement windows that need new glass. The wood stop, I believe called glazing bead, was stapled in as well as being set in a caulk bed. It did not survive.

What would be the best wood from which to make new glazing bead?

Re: Advice needed: window repair

#2

Moses Yoder

Re: Advice needed: window repair

Moses Yoder

Normally the glass is just held in with glazier's points and glaze put into the corner to fill it. There is not really a need for a wood strip.

Re: Advice needed: window repair

#3

Re: Advice needed: window repair

Pat Evans

In this case the glass is double pane which has an internal frame and sealant around the edge. To conceal that the wood glazing bead is required, and in fact, is about 3/4" wide. Rather than a square profile and glazing to fill the corner, the profile of the glazing bead has a beveled edge that mimics glazing and the whole bead is well seated in a bed of caulk.

Re: Advice needed: window repair

#4

Re: Advice needed: window repair

Larry Clinton At Frankfort, (Central) Indiana

Depends, if the wood that you removed was damaged/rotted due to moisture than I would use a wood that is durable like Redwood, Cedar, White oak, locust, walnut etc. that you normally would use for outdoor furniture. If you are like me (and most woodworkers), you probably have enough scrap of several species that you could use for the job. If the wood is going to be painted and the wood you removed was solid, it really wouldn't matter if you use pine.

Re: Advice needed: window repair

#5

Is there a window company name?

Gary Smyth

Can you contact them?

Re: Advice needed: window repair

#6

Re: Advice needed: window repair

FredD

Pine would be fine , the three leading wood window companies use it, it will need a finish on it.

FredD

Re: Advice needed: window repair

#7

Re: Is there a window company name?

Pat Evans

The house is 32 years old. I haven't found anything that has a name on it.

Re: Advice needed: window repair

#8

Thanks

Pat Evans

Thanks for the responses. I hope all the windows are in as good a shape as the first one. There was no rot or even any sign of moisture. The sealant on the double pane glass had melted and the windows fogged on the inside.

Tomorrow I'll get some clear pine and start making glazing bead.

Re: Advice needed: window repair

#9

Shop carefully.....

Barry Irby

You want Ponderosa Pine or something similar, Not yellow pine or white pine. Straight grained old growth stuff would be the best. See if you have an old line mill work supplier locally for a supply of the wood. This would be less prone to warp than yellow pine and more decay resistant than either yellow or white.

There are companies that repair such windows locally. You might be able to find one in your area and them might be willing to give you some help on removing the stops and salvaging them.

Also look into treating the wood with some type of clear preservative like Bora Care.

Re: Advice needed: window repair

#10

Re: Advice needed: window repair

Larry in NW OHIO

Pat here is a site that I used a couple of times, but it`s been a few years. Maybe you could get an idea or find something to help. Good Luck Larry www.pickenswindowparts.com

Re: Advice needed: window repair

#11

Re: Is there a window company name?

FredD

That's not really old for a house , wood window companies then and now , were generally Anderson, Pella and Marvin in that order for Casement windows especially.

FredD