Re: Help to get new WW machine running
billin
parallel the two switches and you'll be set, I'd put the fuse first though.
Knowledge You Can Build On — Est. 1998
Re: Help to get new WW machine running
billin
parallel the two switches and you'll be set, I'd put the fuse first though.
Re: Did you get my email Carol?
Larry Clinton At Frankfort, (Central) Indiana
Carol, I sent you an Email with a drawing that will work for your machine. (I designed the circuits for many automated manufacturing machines in my 30 years as an Engineer).
Re: Did you get my email Carol?
Carol Reed, Strawberry, AZ
Sorry, Larry, no email from you. I checked spam, trash, and the inbox. And I am still working on it. I can get myself soooo confused!!!
Re: Did you get your system to work Carol?
Galen Vetterick
Carol
Either of the diagrams you have that you made from my input or Robby's should work if the components you have are correct and you double checked the wiring you did to match same.
I assume you know your solenoid coil is 120 volt AC.
I assume you got the relay pin numbers correct for the 120 volt coil and contacts. This can be inprinted or embosed on the relay. Think you actually noted the socket part from what I have of Radio Shack.
You have one momentary close PB and one held closed push to open PB. You actually represented one as a PB and the other is not the correct symbol for a PB but if the action is right it will work.
Did you just apply power direct to the solenoid to see if it will energize the coil?
I never ask what action you want out of the solenoid and if it is the proper porting to do what you wish with air. Nor did I ask the inruch current for the solenoid coil. Your relay contact has to be heavy enough to carry the load and not arc over time and damage the contact. I did not question why you just do not switch the relay direct cause that's not what you ask for.
I'd answer questions if needed. You can email if you wish: galenv@msn.com
Re: Did you get your system to work Carol?
Carol Reed, Strawberry, AZ
See my update post, Galen.
I used your diagram because it made most sense to me. This project has been going on for some time and now I am going to see it through!
Re: Did you get my email Carol?
Larry Clinton At Frankfort, (Central) Indiana
I used the Email address you have at the top of your messages - I will send it again. It shows it was sent and I didn't receive any invalid address etc.
Re: Did you get my email Carol?
Carol Reed, Strawberry, AZ
Mystery solved. You got trapped in my spam filter. Don't know why. But thanks for the drawing. Gonna add it to the collection. I do have the electrical circuit working. I am replacing the solenoid. Seems to have been mis-boxed. The new one should be here tomorrow or Tuesday.