Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Interior house painting Question

Posts

Interior house painting Question

#1

Interior house painting Question

Barry Irby

We are starting to paint interior of the house I bought to flip.

I am betting this house has not had a fresh coat of paint, maybe ever. It was built in 1977 and since about 87 a packrat lived in it and I am sure she did not paint the interior.

We are using Valspar paint, their 2000 series of latex with an egg shell finish. Rolling it. In two locations near windows the old paint pealed. We washed the walls with TSP and let them dry thoroughly. When we put the new paint on within a few minutes the old paint lifted and came off in sheets, right to the drywall. One spot was about two feet in diameter and the other a foot across.

Anybody got any idea what gives? And what to do about it?

Re: Interior house painting Question

#2

Re: Interior house painting Question

Ken Oakley-Sunny St. Cloud, Fla

Insure the house for 200K. Pile some oily rags in a closet. Lock the house up tight. You won't have to worry about selling it anymore.

Re: Interior house painting Question

#3

Re: Interior house painting Question

Terry in Edmonton

If the drywall is sound then it could possibly be some kind of oil contamination. Give the area a coat of shellac to seal it and then a good primer. This has worked for me on a couple of occations.

Re: Interior house painting Question

#4

Re: Interior house painting Question

Keith Newton----Little Rock, Arkansas

I'm thinking that the first painters didn't prime the drywall very well, if at all. Then, the water in your paint absorbed into the old paint swelling it enough to cause the blister. A oil-base primer probably would have been a good idea. Although, I'm not sure the same thing wouldn't happen with the following coats of latex.

Re: Interior house painting Question

#5

Re: Interior house painting Question

Bill Houghton, Sebastopol, CA

I concur with the shellac suggestion. Your hardware/paint store's probably got Zinsser's BIN primer.

But you might find yourself a pro paint store and ask the question there.

Re: Interior house painting Question

#6

Re: Interior house painting Question

Galen Vetterick

Take your pealed paint sample to a professional paint store and they can tell you a lot about what has happend by looking at the sample under magnifcation. They helped the company I worked for fight many battles on failed paint on municipal and industrial water treatment equipment.

Could be a lot of things I imagine. TSP residue will prevent adhesion even if you used the no rinse type, it has to be the right concentration. Anything used different to clean the windows or casings that may have ran down the wall? Years of condensation or jsut rain water running down the wall or from your description junk piled by the windows that reacted with old paint or drywall? No indication of mold existing on back side of drywall? Is the window areas the only places lifted?

Hope a professional can tell you "the rest of the story"

Re: Interior house painting Question

#7

Re: Interior house painting Question

FredD

I think Barry if I had the same job , I would forego the TSP and roll a coat of PVA primer/sealer on it. This would give a uniform surface for the new paint.

PVA is a lot cheaper then Shellac , though Shellac works when all else fails.

Ask Jason , he does it for a living.

FredD

Re: Interior house painting Question

#8

Re: Interior house painting Question

Ron Jones

Shellac is about as foolproof as it can get.

Re: Interior house painting Question

#9

Question

Bill Tindall

If the current paint is not adhered to the drywall how will shellac solve the problem? I agree with others that you need to get some on site professional advise that will suggest a fix after actually seeing the problem first hand.

Re: Interior house painting Question

#10

Re: Question

Barry Irby

Been wondering about that too.

I will check with Sherwin Williams tomorrow.

Re: Interior house painting Question

#11

Kneale Brownson

Prep

Kneale Brownson

I've seen this happen in several places I've painted. Most likely the drywall was not even wiped free of dust, let alone primed.

Only real solution if you want a smooth surface is to scrape off the old paint, sand, prime, paint. Spritzing with water might make the scraping process easier. About a 6" drywall knife works pretty well.

Hope you don't have "popcorn" on the ceiling and want to paint that too.

Re: Interior house painting Question

#12

Re: Prep

Barry Irby

It is clearly the old paint that failed to adhere.

We were marveling that the paint looked as good as it did before we started painting. the last house we did had hundreds of little drywall and paint defects that we spent many hours fixing. We that this one was going to be a piece of cake to paint and then the paint started lifting off.

This is a flip this house project or maybe a rental. don't know how much effort to put into trying to kill those ragged edges. May spackle them lightly and touch up.

Interesting. The paint stays on the wall for thirty four years...until I show up.

Re: Interior house painting Question

#13

Re: Prep

Bill Howatt

I have used TSP to wash oil-painted walls prior to applying latex with very good results. One problem I had with latex was after applying the second coat I got blistering and peeling. Called paint store and they told me because of the humidity in the air at the time I was doing it and putting a second coat on quickly to put a dehumidifier in the room and dry it out. Fixed my problem.

You said the base coat was coming off. I wonder if it is porous and water from the latex is getting through causing it to lift like oil stuff is prone to do in the presence of water. The sealer suggestions would likely help this or maybe even a dehumidifier.

I feel your anguish, nothing worse than dumb painting when it doesn't go as expected.

Bill

Re: Interior house painting Question

#14

Another observation....

Barry Irby

This house and electric baseboard heat. At the moment we were painting it has no heat or AC because we were removing the baseboard heat and going to heat pump. The problems sofra have been above the baseboard heat locations and it was humid. Wonder if years of heating and cooling has caused the original paint film to lose its adhesion? The heat pump just got installed yesterday. Maybe we should be running the AC.

Re: Interior house painting Question

#15

Steve Strickland

Re: Interior house painting Question

Steve Strickland

Simple enough to just scrape it off. Use some 200 grit on your belt sander to keep the scraper blade sharp. Of course it'll scrape the drywall texture down some too.

Re: Interior house painting Question

#16

Kneale Brownson

Re: Another observation....

Kneale Brownson

The A/C should perform like a dehumidifier. Maybe hold off on the painting for a few days.

Re: Interior house painting Question

#17

Re: Another observation....

Lee Brubaker

The best advice in all of the above is the suggestion to take blister to a paint dealer that you have confidence in. Also if you have a digital camera it might be a good idea to take a few pics & take them in as well.

Lee