Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Heat for Workshop

Posts

Re: Heat for Workshop

#26

Re: Thanks for posting that....

Steve Schoene

I'd sure want my house to come out virtually unscathed from any event that occurred at five year intervals. If very many houses had major damage from a typical hurricane insurance rates would be unaffordable in such a case. Ask folks who live east of I 95 in Florida.

Not so many earthquake zones--but certainly if I lived on the left coast, or in Southeast Missouri I'd want the house I built to reflect that.

In any event, the rules do vary considerably with wind zones and seismic prospects.

Re: Heat for Workshop

#27

Re: Heat for Workshop

Jim Dillon

Kelly,

Here is a link to a past WC thread regarding shop heating where I describe two Markel "Bulldog" electrical heaters that I installed 16 years ago. They work so well that I probably could have gotten by with just one. I followed the suggestions in this thread for 6-inch walls (with R-30 insulation) and that was really worth it. For other suggestions, use the WC search function and search for "shop heat", or whatever and you will find several other interesting discussions.

Jim

http://www.woodcentral.com/cgi-bin/archives.pl/bid/1001/pro/search/pmd/sread/srchid/242282XHRD34kLE8IaQV1307965030/spage/1/sanc/397033/sbid/1001/md/read/id/397065/sbj/electric-shop-heaters/

PS: Ellis, for some reason I no longer have the options for posting links or using emoticons in my replys. Not a deal breaker, but I miss those features.

Re: Heat for Workshop

#28

Thanks Bill Houghton...

Jim Dillon

... for so promptly responding to my query this morning regarding my problems with WC posting. I think all is fixed now thanks to deleting a couple of spaces before my posting name and updating my preferences. Good to know that help is just around the corner, so to speak.

Jim