Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Newest Project Done!

Posts

Newest Project Done!

#1

Newest Project Done!

Dale Penkala

Just thought I'd share my newest project that I finished. This is what I call a raised desk clock w/temp & humdity gages. The over all lenght is 10" & is 7-1/2" high. I particularly like the fact that it has a pendulem in it. I have made 2 clocks with just the top portion of the clock & pendulem unit at a smaller scale in the past.

The 2 bases as well as the clock portion it self is made out of black walnut, the 2 spindles that raise the top part of the clock is maple, & the tempature & humidity gages are inset in purple heart.

I used shellac to finish the walnut pieces, rubbed them out for the high polish. I also like the depth apperence of the grain although its difficult to see in the picture.

Currently I have another clock project going with glass & a mirror encasing the movement with 4 spindles raising the top & bottom of the clock.

Thanks for looking!

Dale

Mid-Michigan


Re: Newest Project Done!

#2

Cool ! Like the pendulem window !

steve mackay

Re: Newest Project Done!

#3

Re: Newest Project Done!

Larry in NW OHIO

Very well done Dale. I wish I had an inmagination to do different looking things that alot of people do here. Larry

Re: Newest Project Done!

#4

Re: Newest Project Done!

Dale Penkala

Thanks Larry & Steve! I like it alot too! I was conserned that it would look kinda funny when I started lifting the original clock but with the addition of the other 2 gages it helped fill in the void below. I thought the pen might make it cluttered up, but in the end it added to the apperence of the project. The pendulem was another neet thing too. I've seen clocks similar without the pendulem but this dresses it up.

Thanks!

Dale

Mid-Michigan

Re: Newest Project Done!

#5

I Like It Very Much, Especially the pendulum windo

George@Colonel's Workshop-Havertown PA

Re: Newest Project Done!

#6

Re: I Like It Very Much, Especially the pendulum w

Dale Penkala

Thanks George! I like it so much that I don't think I'll ever make a clock without the pendulem movement in it.

Dale

Mid-Michigan