Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

6 June 2011

Good Morning,

Well, not really "morning" for many of you, but hey, I'm oncall this week/weekend and working all night most every night has taken its toll on this old boy. I thought I post this early as I hope to be sleeping by the time many of you get up and read this.

The LOML Jr. is now married, the wedding is over, our neighbors wedding is now over and we can all settle down a bit to get some much needed rest.

No shop time for me this past week or weekend.....all work and no play has made me a grouchy old man. :D

That's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Re: WC Weekend Accomplishments....

Ron in Sterling, CT

Hi Dennis,

I actually got in some quality shop time this weekend. I made and installed the box inside a blanket chest I am making for my son.

Went to a field auction yesterday. There were lots of old tools there, but I think every tool dealer in New England was there. Prices were ridiculously high, so I came home with nothing. Have a great week.

Ron

Re: WC Weekend Accomplishments....

#3

Re: WC Weekend Accomplishments....

George Colonel's Workshop-Havertown PA

Good Morning Dennis,

Congratulations. Now you may be able to take a very little time and relax.

It was a grand weekend for us. My #2 daughter spent an overnight Sat to Sunday, and w/o children in accompanyment. We had a opportunity to be one on one, and the effect was happiness in her old man's heart. My #7 son Jim helped me assemble the new 4-poster Shaker bed in the guest bedroom. With mattress and box spring, sheets and blanket, it looks every part made for the ensemble. I matched the dyed 1/4 sawn sycamore identically and set up one of the Shaker tilt top oval tables as a night table. Lizzy was the first to sleep in the new bed, and really likes the way the room is coming together. Our #1 son and his family were the highlight of the family dinner party on Sunday night. GeorgeIII helped me BBQ the pork chops and chicken legs, and assisted greatly in beer consumption. So we enjoyed ourselves and the entire weekend. Shop time???I installed some hand grips in and around the shower to protect myself from falling. Have a wonderful week, Dennis.

George

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Gary Smyth

While mowing the grass last Thursday I noticed that the sound from the tractor was getting very loud. I quickly realized that the muffler wasn't doing its work. In as much as a new muffler was part of a major winter project I prayed that the weld on the stub did not break and I didn't have to buy a new muffler.

Saturday I went out at 11:00AM to check. Six bolts and screws later I could see that I lost the muffler attaching bolt, and from Spring cutting until now the mufflerbolt unthreaded and slid off the flange. The bolt was absent. I slid the muffler on the flange and went to find a new attaching bolt. 7/16 x 20 x 5/8". Has to be that size as it fits an enclosed tap. I didn't have a spare and 5/8 length was in no big box store. Thinking that them not having that length was an aberration I held off on cutting down a 1" length bolt and grinding it for use. Four stores and 25 miles later I got several and put one in. Then the problem. When I went to replace the screws and bolts I took out to get a look and access to the muffler and realized I didn't anchor three intersecting and aligning heat shield pieces when I removed the screws originally. Everything moved and nothing wanted to align. Long story short, four hours later, several bloody knuckles, the removal of the tractor mower sides, hood, and grill I had enough space to insert several toothpicks and skewers as alignment pins and get my fingers wedged in to hand start and install one of four half inch long 10 x 24, with washers, machine screws. The big bolts were easier. To tell you access was limited is to put it mildly. Two word filled full hours after that, the last panel, headlight connection, and wing nut was inserted and the mower sides and hood were then reinstalled. Now I admit the tractor is a 1972 Cub Cadet. Things were designed and built differently then, and bolts of all sizes were common place in most any local hardware store. But this was a bear. Over seven hours total to reinstall a single muffler bolt.

Re: WC Weekend Accomplishments....

#5

Sweat & Tears

Mark Mandell - Gone Round In Jersey

Got the log splitter working to begin putting up Memsahib's firewood for next Winter. Part is Oak I cut last year and the rest is Walnut and cherry that made up my turning stash that got too old and checked. Got about a cord and a half split and stacked. So much for the sweat.

The tears started falling when I started splitting the old cherry bolts. These were 20" round by 20" long but my splitter was having a bit of a go and the grain appeared interlocked like elm. When I split off a tangential slice I learned that what I had was both curly and quilted cherry. OMG, I had, unknowingly, 4 years ago simply whacked up an exceptional cherry log from a construction site. I then let it sit and go bad. What a phenomenal flitch just went to the burn pile! The wood karma will be onerous on this screw-up.

On a more positive note, I got the three mini urns for my friend Joe finish-turned and hollowed. Now to line them with epoxy, do the inlays, and dye and finish the exteriors. A few tears on this as well as I remembered my friend, but smiling tears at that.

Have a great week Dennis

Re: WC Weekend Accomplishments....

#6

No Lightning Bolt, eh, Garry?

George@Colonel's Workshop-Havertown PA

Re: WC Weekend Accomplishments....

#7

Dale Lenz

Re: WC Weekend Accomplishments....

Dale Lenz

Helped my youngest son, #2 move into a third floor apt. Hope he Enjoys the View!

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Robby Wright in San Marcos, CA

:( Frustration! So I am working on my new outfeed table for my tablesaw. I cut and mill two pieces of lumber to finish the edges of the fold down section of the table. From these two pieces of lumber, I need to cut two sides and one longer piece for the outside edge. I grab the long piece and cut the longer section and one of the sides. Set them on the workbench. Grap the other piece I milled and cut the remaining side.....No, wait a minute - that was the longer piece for the outside edge I just cut into two smaller pieces. Arrgghhh. Went inside and sulked the rest of the weekend because I was out of that size material. That grinding sound you heard was the gnashing of teeth. :(

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Dave Paine

I spent Saturday in a wood related activity which was not desired.

The previous week we had a storm blow through the area. Several telephone poles were snapped in two.

I had a 20+ ft pine tree snapped in two. Also a small 3ft Japanese Maple. Some yards away my sailing dinghy was thrown against the horse trailer. Two houses down the camper was pulled over on its side.

A few dents in the siding and some flashing bent over. All in all, not much damage.

I spent Saturday trimming the branches off the pine tree to get the trunks on the ground. I burned some branches, but still a very big pile.

The insurance adjuster is too busy to stop by. Now I have to call the agent back to ensure that if I engage some one to haul away the tree I will be reimbursed.

So I can say I spent all day with wood, just not the type of activity I wanted.

I have two cutting boards awaiting to be finished.

Re: WC Weekend Accomplishments....

#10

Re: WC Weekend Accomplishments....

Joanne in Point Pleasant, PA

Picked up another sheet of prefinished maple ply to finish the closet built-ins I've been working on for 99 years. (well, okay, maybe not THAT long, but it seems like it!) Discussed moldings and spacing and how to install the cabinets and bookcases in this closet with a cabinetmaker buddy. Then I ripped apart my Subaru dashboard to replace the cd receiver that ate my favorite cd. It was pretty much like working on a computer--in a really big box! Bought a new unit with Bluetooth and usb to plug in an iPod--sounds awesome, even with the crappy door speakers that came with the car. Then I got to go play music with my band and get fed a lobster dinner for payment. Yum!

Re: WC Weekend Accomplishments....

#11

Re: WC Weekend Accomplishments.... *LINK*

Jennifer Indy.USA

Dennis, I usually have nothing to add to these because I'm always working but this weekend was different. It was a big one for us here!

Jen


OUR BIG DAY!

Re: WC Weekend Accomplishments....

#12

Re: WC Weekend Accomplishments....

Jennifer Indy.USA

sounds like a most productive weekend!