We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
I have a problem that someone may help me. I have a good friend that has started a very complicated permit process to have a very large and massive oak tree removed for a construction project. Is there a urban forestry program in place that would be interested in harvesting this tree for the lumber so this tree does not go to waste?
The permit process is already started and the preliminary ok has been approved. I would hate to see this tree removed for firewood or chips and feel there is a lot of lumber quality wood to be recovered. Any info would be greatly appreciated!
might be the best way to locate resources. Either through local woodworking or turning clubs or by getting a story in the local news, or both. If you can find a historical link for the tree that would be a great. If you can get publicity about how the tree owner wants to have the tree preserved by having the wood used, he can probably also get local arborist interested in helping take it down and cut up for users. If you could find a local library, museum, etc which would agree to display something made from the tree, you could probably find someone to volunteer to make something.
If it's very old, don't be dissapointed if you bring it down and it's hollow and rotten on the inside. I think good oak trees are in their prime about 50-80 years old, when the trunk is about 18-24" diameter.
I would try Cerritos college or Palomar college. I know for sure Palomar has an urban forestry program and could probably help you with information.
I don't think CDF would be much help up here in northern California most the oaks harvested during logging go into a chipper or if it is a smaller job they get sold to firewood buyers, so very few people are milling it into lumber.
Southern Ca is a big area where abouts in so cal might make a difference. As Tom mentioned Palomar College has a woodmizer and a strong wood working program.
If the tree is removed by West Coast Arbor they have a comercial wood milling operation, or at leat they used to.
There are a few guys running mills and a few wood workers that like to use urban salvage.
That all said don't be suprised if there is no interest in mlling your tree. California has almost 40 native species of oak along with all the non-natives that have been planted going back to the early settlers planting cork oak. many of Californias oaks are really only suitable for fire wood. The very first tree I ever milled was an oak and it dried with so much internal checking that it was not usable.
Even if your tree is a type that is usable for lumber it will be a challange as this is the worst time of the year to dry oak in California. Stack your wood outside in the shade and out of the path of the wind. sticker it so air can circulate but don't try to dry it too quickly.
I started this reply yesterday and stuck the Camera Smart card in the wrong slot and had to get a genius friend to get it out.
His high- tech method consisted of unplugging the computer and holding it upside down and shaking it, worked like a charm.
About some Oaks in the Alameda-Contra Costa bay area, they consisted of live Oak , of two types called Valley Oaks and Blue Oak which has beautiful blue leaves.
They were rapidly being cut down for Firewood when I left that State.
The local indigenous natives used the very large Acorns to grind for a principal food source. Particularly the Miwok and Ohlone tribes used this method, along with some smaller clans in Contra Costa county.
You can walk some of streams and see flat slabs of stone , always near water and a grove of Oak and see the holes in the stone that is called a community Mortar which were created by hundreds of years of pounding with a Pestle.
Also the Indian wife had a moveable Mortar and Pestle like the one I have which came off of the Mission Peak area in Fremont, Ca. along with several smaller ones, used for grinding Pigments and Medicine.
The one I have is very similar to the ones that have been dated in the three to five thousand year range.