Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Pulled the trigger...

Posts

Pulled the trigger...

#1

Dale Lenz

Pulled the trigger...

Dale Lenz

on the Festool CT-26 Dust Extractor, Ouch! Got the RO-90 sander a little bit more than a month ago, seems to be a great little sander for my type of work, makes the dust! Summers here and A/C will be running in the shop soon. Could hook up vacuum to more wood making chips in the future, why I went w/ the larger machine. Hope the fat-lady sings good to me. It's my birthday present to myself!

Re: Pulled the trigger...

#2

Re: Pulled the trigger...

Jesse Cloud

Happy Birthday Dale!

Those Festools are addictive!

BTW, with the sander you may want to experiment with the suction control (the rabbit/turtle knob). Too much suction can actually slow things down - the workpiece 'sticks' to the sander and inhibits a nice smooth movement. When I sand thin panels, with the vac on full power I can lift the panel up in the air.

Re: Pulled the trigger...

#3

Dale Lenz

Thanks, Jesse,

Dale Lenz

That information will come in handy. I've got a few more hours of sanding left to do and the Festool is not schedule to arrive here until Thurs or Fri. Won't need the "vacuum" for two more months or so. I'm sure my memory will kick in went I suck up a flag case. Thanks for the BD wish also.

Re: Pulled the trigger...

#4

Re: Pulled the trigger...

Larry in NW OHIO

Happy Birthday also Dale. Hope you have a great, safe birthday, Larry

Re: Pulled the trigger...

#5

Dale Lenz

Would you believe

Dale Lenz

Just got showed and dress about 30 min. ago. Took the day off today from my day job. Spent all day on the puter, spending money and tryin to teach my boxer dog a new trick. Thought I best get cleaned up before the wife get home, Geee. Thanks for the BD wish, Larry.

Re: Pulled the trigger...

#6

Rabbeting Requires a .Hare Trigger..

George@Colonel's Workshop-Havertown PA

Re: Pulled the trigger...

#7

George, Go West Now

Mark Mandell - Gone Round In Jersey

Re: Pulled the trigger...

#8

As A Young 2/Lt

George Colonel's Workshop-Havertown PA

I remember an encounter with a huge TEXAS JACK RABBIT while crossing the golf course at Sheppard AFB, Wichita Falls, TX. I was walking to the commercial airport to arrange transport home after graduation from Air Transportation Officers School. I flushed this animal and he tried to run away. He was impossibly big to my Eastern eyes, and as he began his gallop I could actually hear his foot falls. Luckily I was able to get a rope on him. After some persuasion, I rode him to the Commercial terminal and made the arrangements. He was only about half broke, but I used himn to ride back to the base where I released him to the praries.

George

Re: Pulled the trigger...

#9

T'wern't No Rabbit *LINK*

Mark Mandell - Gone Round In Jersey

Thet there was a Texican Jackalope. Cause a lota problems as they kin usually only be seen by greenhorn Eastern fellas, and even then mostly on golf courses where they're blamed for high scores and extra consumption in the 19th hole.

BTW, when you went for your ride, did ya hold'im by the horns or the ears?

Attached is the Wyoming variety. They run a bit smaller, of course


Giddyup Bunny!

Re: Pulled the trigger...

#10

Yeah, But, Mark

George Colonel's Workshop-Havertown PA

My story is true! ;)

George

Re: Pulled the trigger...

#11

Of Course It Is

Mark Mandell - Gone Round In Jersey

Where'd ya think those Wyoming sheepherders got the idea? 8)

Re: Pulled the trigger...

#12

Kneale Brownson

A beery nice tail

Kneale Brownson