Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Car Guy? Replacing tire lug Question

Posts

Re: Car Guy? Replacing tire lug Question

#26

Re: P-F and F-P

Bill Howatt

Right at it, the bullet and weight are both under the influence of gravity.

Bill

Re: Car Guy? Replacing tire lug Question

#27

Re: P-F and F-P

Ken Garlock, Collin County Texas

Yes,Bill, you win a somethingorother. I wonder how many people start pointing their gun toward the ground.

Have fun,

Ken

Re: Car Guy? Replacing tire lug Question

#28

Don't you hate that?

John in NM

Silly mistake and the spell check feature misses it! Too late to edit it seems.

Sorry about that, meant to say gentle of course. :D

Re: Car Guy? Replacing tire lug Question

#29

Re: P-F and F-P

Bill Howatt

I saw it demonstrated in a first year physics class with a tin can and a pea shooter. The pea coming out of the shooter broke a light beam causing an electromagnet to release the tin can. Pea landed in the can. Not what you would expect until you think about it.

Bill

Re: Car Guy? Replacing tire lug Question

#30

Re: P-F and F-P

Steve Schoene

When relating to torgue the pound means a pound of force, not a pound of mass. If expressed fully, a foot-pound (force) is the same as a pound(force)-foot. Torgue is just a force times a radius and it doesn't matter which order you do the calculation. I suspect the confusion between pounds of mass and pounds of force is why some prefer pound-foot for torgue, though the newton-meter may be the clearer reference.

Re: Car Guy? Replacing tire lug Question

#31

Re: P-F and F-P

Ken Garlock, Collin County Texas

Of course you are right, Steve. I always get the two, force and mass, bass-ackward. I guess I am just stuck on needing a visual, and mass is pretty visual especially when it is coming at you at 90 mph in the form of a baseball. :D

Well, I guess we have beat this enough without resorting a discussion needing a cool refreshment.

Ken

Re: Car Guy? Replacing tire lug Question

#32

Re: P-F and F-P

Carol Reed, Strawberry, AZ

My, how we digress from the original post, but what an enlightening conversation, gentlemen. Thank you.

Re: Car Guy? Replacing tire lug Question

#33

Jason Roehl in Lafayette, IN

55 lbs? *LINK*

Jason Roehl in Lafayette, IN

I have 3 vehicles in my driveway. One of them is a Chrysler minivan, whose manual specs 100 ft-lbs of torque per lugnut (5 of them), the other two vehicles are 3/4-ton trucks (okay, one's a fullsize van). The '93 F250 gets its lugnuts tightened to 140 ft-lbs, and I haven't looked on the '03 E250 yet (I've only had it a month), but I would guess that those would be the same. Both of them have 8 lugnuts.

There are special sockets for impact wrenches that can be used to install lugnuts--they have some sort of ratchet-release system internally and are designed for a specific torque, commonly called a "torque stick". (see link below)

Not to mention, a torque wrench is only as good as its recent calibration, so with lug nuts, I would hazard a guess that there is a good bit of "fudge factor" built into the specs. No matter the spec, if you can turn a lugnut by hand, it's too loose.

Jason


Torque Sticks