Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Some of my work featured in magazine. *LINK*

Posts

Some of my work featured in magazine. *LINK*

#1

Some of my work featured in magazine.  *LINK*

Keith Newton----Little Rock, Arkansas

Here is a link to the online article. I had a lot more work in this place than is shown in these shots, but at least my friends here get to see some of it.

The desk is the one that I used that monumental Bubinga board for the top.


http://www.athomearkansas.com/article/renovated-and-refreshed

Re: Some of my work featured in magazine. *LINK*

#2

Re: Some of my work featured in magazine.

Thomas Skaggs, Foothills of Mount Level

Keith,

Great to see your work get some well deserved press. The desk looks great! I like the looks of the chair but I'd say it's a mis-match design-wise to your beautiful desk. None the less, well done!

Tom

Re: Some of my work featured in magazine. *LINK*

#3

Clint Searl

Nice detailing on the desk...handsome

Clint Searl

Re: Some of my work featured in magazine. *LINK*

#4

Alan Young

Re: Some of my work featured in magazine.

Alan Young

Keith-desk looks great-wish there were some close-ups-Congrats on the Publication...

-Alan

Re: Some of my work featured in magazine. *LINK*

#5

Re: Some of my work featured in magazine.

Mark Mandell - Gone Round In Jersey

Congrats, Keith.

Very nice-looking work.

m

Re: Some of my work featured in magazine. *LINK*

#6

David Barnett

Fantastic!

David Barnett

You did justice to that board, Keith. Beautiful work. Love the edge treatment.

Re: Some of my work featured in magazine. *LINK*

#7

Thanks everybody. Also I need to point out

Keith Newton----Little Rock, Arkansas

That I did all of the cabinets in the photos, but they didn't give me credit for that in the photos. Also, some of the smaller things, like the fruit bowl.

I wish they had pulled some of the bar stools back. That island has some fantastic Bubinga getting lost in those shots.

While the article mentions Blum hardware, I used the metal-box drawers throughout, fitted with all of the divider stuff shown in the catalogs. It is a neat system, once you get the hang of using it. I wish they had shown some of the drawers open.

I just found out about this article, and was NOT present when the photographer and writer were on site, or I might have gotten more credit than this gives me. I did enjoy working with Gary Mertins and the owners, as we found our way through this project.

It is amazing that it turned out as well as it did, considering that the house was built in 1926, the same year as my shop, and that the kitchen was probably 4 rooms back then, with the windows were where they are now. So we were working with lots of fixed parameters. lots of the ideas for this space were mine, and I did all the drawings, with only a few changes.

In a project like this, there are many challenges that make for difficult obstacles. The longest wall of the kitchen had a 1 1/2" hump in the middle, for example.

This is a rock house, which has exterior walls of 18" thick stone, with 1"x sleepers on the inside, then plaster on top of that for the outside walls. The inside walls are like in balloon framing, going up two stories, with the band joist notched in.

Re: Some of my work featured in magazine. *LINK*

#8

Re: Thanks everybody. Also I need to point out

Robin Corell in Atascadero CA

Nice work. The legs on that desk are nicely detailed.

I hope you got paid well for your design for the space as well as your cabinet work.

Robin