Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Wood ID, please. Attn: Tom Dunlap

Posts

Wood ID, please. Attn: Tom Dunlap

#1

Wood ID, please.  Attn: Tom Dunlap

Bruce, a MN Galoot

I found this chunk of wood sold as firewood in Yosemite. I couldn't bring myself to burn it, though. Any idea what it is? It is very hard and very heavy. The first shot is with the bark removed. The second is where I tried to plane it. The planed version seems to have rays reminiscent of an oak of some sort. I'm thinking of turning it down for a couple chisel handles.



Re: Wood ID, please. Attn: Tom Dunlap

#2

Re: Wood ID, please.  Attn: Tom Dunlap

Thomas S Stockton

looks like valley oak to me. tends to be more closed grain than red or white oak and seems to check when dried. This is a table I madeout of some and it is real pretty but there was a fair amount of waste and filler in the finished piece.

Re: Wood ID, please. Attn: Tom Dunlap

#3

Re: Wood ID, please.  Attn: Tom Dunlap

Tom Dunlap

Those dimples under the bark reminds me a lot of burr oak. I'm not sure if Quercus macrocarpa grows near Yosemite.

It is very likely to be in the white oak family.

Re: Wood ID, please. Attn: Tom Dunlap

#4

Thanks, guys

Bruce, a MN Galoot

This is some pretty nice looking wood, and it sure has cracked a lot in the drying, but then it was never intended to be lumber. I'll see how it resists splitting, and if it's at least somewhat interlocked, then it'll become some chisel handles.

thanks for the ID.

Re: Wood ID, please. Attn: Tom Dunlap

#5

Re: Thanks, guys

Keith Newton----Little Rock, Arkansas

If you are set on using it for the handles, you can improve the chance of drying without checks by going ahead and cutting it into blanks a little larger than your finished handle. Stack and sticker, or even just lean them something so air can circulate around them. But not in the Sun.

If your bandsaw has trouble now, it really will later. Wood harden as it dries.

Re: Wood ID, please. Attn: Tom Dunlap

#6

Ellis Walentine

Nice driveby, Tom

Ellis Walentine

... and a worthy gloat indeed. Wow, what a nice table!

Inquiring minds want to know how you managed to get multiple 3"-thick bookmatches? Only thing I can come up with is sawn veneers. Help us out.

Ellis

Re: Wood ID, please. Attn: Tom Dunlap

#7

Re: Nice driveby, Tom

Larry in NW OHIO

Yes Tom where did you get such pretty lumber. Do you have a special dealer that you don`t want to disclose ;) ;)

I wouldn`t mind getting a little bit of that. Larry

Re: Wood ID, please. Attn: Tom Dunlap

#8

Re: Thanks, guys

Bruce, a MN Galoot

this is already a year old and hard as a rock. I tried to bandsaw some of the irregularities so I could plane it flat to look at the grain. It was extremely difficult cutting and the blade insisted on following the grain.

Re: Wood ID, please. Attn: Tom Dunlap

#9

Re: Nice driveby, Tom

Thomas S Stockton

I built that table at least 20 years ago and it has an interesting story. My first wood working job was for a company that made high end hand carved outdoor furniture out of redwood, the client contacted them since he had some of their furniture and dropped the wood off. The lumber sat for a number of years and the shop production manager got sick of it being the only project they couldn't get off the to do list. So they sent the lumber and client to me and I built this table and a similar coffee table.

The post are sawn veneer, the rest is solid.

The lumber came from a tree in the clients yard, he told me he was worried about it falling on the house and had a tree company come out and look at it. They told him it should come down at which point he tried to contact someone within the city or county of Sacramento to double check about a tree ordinance, when nobody would return his call he took the advice of the tree people and cut it down. I guess at this point trouble started and the local tree preservationist group raised a huge ruckus and in the end got a tree ordinance passed. The client felt horrible about the hole thing since he had tried to do the right thing and decided to have the tree milled into lumber and have something made out of it.

So in the end a couple of good things came of the tree, a couple of nice tables and a heritage tree ordinance.

I have no idea where to find more.

Tom

Re: Wood ID, please. Attn: Tom Dunlap

#10

Re: Wood ID, please.  Attn: Tom Dunlap

Hikmet C. Sakman Victoria, BC CDN

Hi Tom,

Yes the same tree grows here in Vancouver island as well and it is called "Garry Oak" Very dense, very pretty kind of white oak, but very wasteful when it is not seasoned carefully. Honeycombing is the biggest problem with it when drying it.

Chico...