Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Disassembling Old Furniture

Posts

Disassembling Old Furniture

#1

Disassembling Old Furniture

Mark Salomon

I have an old Limbert rocking chair that is pretty loose in some of the joints. As a consequence it squeaks alot when I rock in it and it's distracting. I'm toying with the idea of disassembling it, cleaning it and regluing it. I assume that it was originally put together with hide glue. Is anyone aware of a primer or overview about how to proceed with this? I realize that heat and moisture will loosen hide glued joints but how exactly is this done with something as large as a piece of furniture?

Re: Disassembling Old Furniture

#2

Re: Disassembling Old Furniture

myrafox647

The April 2007 issue of Pop Wood has an article on how to fix doweled chairs. It may provide some help.

Re: Disassembling Old Furniture

#3

Re: Disassembling Old Furniture

Howard

I have had luck by wetting the joints and heating them with a hair drier. Take it apart in reverse order in which it looks like it was assembled.

Re: Disassembling Old Furniture

#4

The Quiet Side *LINK*

Bruce, a MN Galoot

If you will be so good as to post this on the hand tools forum, right here on WoodCentral, you'll find a few people who are expert in just this topic.


hand tools forum

Re: Disassembling Old Furniture

#5

JL

Re: Disassembling Old Furniture

JL

I've used a clamp in the "spreader" mode and a heat gun.

What might work is a clothes steamer. These are used to get the wrinkles out of hanging clothes. They run about $40-60. Obviously you would have to take care of the finish (or even think about refinishing).

Re: Disassembling Old Furniture

#6

works every time with any furniture glue

Bill Tindall

It is a common misconception that hide glue disassembles any different than "yellow" glue, or white. In all cases drill a hole into the mortise. Insert a basket ball inflation needle connected to tubing which in turn is connected to a steam source. I connect to the nozzle at the top of a pressure cooker. Blow steam into the joint. Put some tension on the joint if you can. In a few minutes it will part as if by magic.

What it works: Typical furniture glues soften at elevated temperature(they are thermoplastic). The temperature depends on the moisture content of the glue; moisture lowering the softening temperature.

Re: Disassembling Old Furniture

#7

Re: Disassembling Old Furniture

Brad Patch

Excellent suggestions offered. Be sure to label all the parts before dis-assembly.

Re: Disassembling Old Furniture

#8

Re: Disassembling Old Furniture

KM

Denatured alcohol will also crystallize hide glue. But it also affects shellac and old lacquer finishes. You can get syringes at a drug store (without Rx, at least in my state).

That said, 90% of the time the joints will bang apart.

Re: Disassembling Old Furniture

#9

Re: Disassembling Old Furniture

Mark Salomon

Thanks everybody for the v good suggestions. I'll give it a try this summer.