Post New Message      Search Current Messages      Set Preferences      Top 10      View User Profiles      Create Profile       Message Archives      Messageboard FAQs      SPAM PATROL      MODERATORS: Wiley Horne & Bill Houghton

Hand Tools

Welcome!
Messages Posted Within the Last 10 Year(s)		(Compressed Listing)

• Re: Alternative for a no2 Stanley -- Jeff -- Tuesday, 1 February 2005, at 2:14 p.m.
  1 message
• Re: Alternative for a no2 Stanley -- Jeff -- Tuesday, 1 February 2005, at 2:19 p.m.
  1 message
• Re: my bench Now -- Ernie Miller Topeka -- Tuesday, 1 February 2005, at 2:28 p.m.
  1 message
• Re: Edging for joining? -- Jeff -- Tuesday, 1 February 2005, at 2:29 p.m.
  3 messages -- Newest posted Wednesday, 2 February 2005, at 9:06 a.m.
• Re: Help w/ 1st spokeshave purchase -- Ernie Miller Topeka -- Tuesday, 1 February 2005, at 2:30 p.m.
  2 messages -- Newest posted Tuesday, 1 February 2005, at 2:46 p.m.
• Re: ... I also believe that LABU *is* superior to -- Greg Sloop, Portland Oregon -- Tuesday, 1 February 2005, at 2:34 p.m.
  4 messages -- Newest posted Wednesday, 2 February 2005, at 7:30 a.m.
• Re: Darn you! :) -- David Hammond, in Powder Springs GA -- Tuesday, 1 February 2005, at 2:40 p.m.
  2 messages -- Newest posted Tuesday, 1 February 2005, at 6:35 p.m.
• Too Cool!!!! -- Wendell @ Murphy, TX -- Tuesday, 1 February 2005, at 2:40 p.m.
  6 messages -- Newest posted Wednesday, 2 February 2005, at 10:03 a.m.
• I'm courious Dean... -- Scott Burr in Ben Lomond CA -- Tuesday, 1 February 2005, at 2:42 p.m.
  1 message
• Re: nice bench drawing too -- David Hammond, in Powder Springs GA -- Tuesday, 1 February 2005, at 2:42 p.m.
  1 message
• Re: Third choice? -- Brad in Ottawa -- Tuesday, 1 February 2005, at 2:48 p.m.
  2 messages -- Newest posted Tuesday, 1 February 2005, at 3:37 p.m.
• Re: Help w/ 1st spokeshave purchase *LINK* -- Eric Hedberg -- Tuesday, 1 February 2005, at 2:50 p.m.
  1 message
• Re: my bench Now -- Greg Sloop, Portland Oregon -- Tuesday, 1 February 2005, at 2:53 p.m.
  2 messages -- Newest posted Wednesday, 2 February 2005, at 10:12 a.m.
• Buy a Boggs -- Ron in Kokomo -- Tuesday, 1 February 2005, at 3:08 p.m.
  1 message
• The modern princess... -- Bill Houghton, Sebastopol, CA -- Tuesday, 1 February 2005, at 3:31 p.m.
  1 message
• Or if you're buying used -- Bill Houghton, Sebastopol, CA -- Tuesday, 1 February 2005, at 3:35 p.m.
  1 message
• Sauer & Steiner -- Wiley Horne--Glendora CA -- Tuesday, 1 February 2005, at 3:39 p.m.
  1 message
• Brian Buckner *LINK* -- Wiley Horne--Glendora CA -- Tuesday, 1 February 2005, at 3:45 p.m.
  2 messages -- Newest posted Wednesday, 2 February 2005, at 8:08 a.m.
• Re: Help w/ 1st spokeshave purchase -- Doug Reynolds in Seattle -- Tuesday, 1 February 2005, at 3:52 p.m.
  1 message
• Re: Alternative for a no2 Stanley -- Dan Donaldson -- Tuesday, 1 February 2005, at 3:59 p.m.
  1 message
• Re: Help w/ 1st spokeshave purchase -- Charlie -- Tuesday, 1 February 2005, at 4:12 p.m.
  1 message
• Wayne Anderson performance -- Christopher Schwarz -- Tuesday, 1 February 2005, at 4:15 p.m.
  12 messages -- Newest posted Wednesday, 2 February 2005, at 6:44 a.m.
• Re: Third choice? -- Steve Kubien -- Tuesday, 1 February 2005, at 4:33 p.m.
  1 message
• Re: Help w/ 1st spokeshave purchase -- Christopher Fitch @ Memphis -- Tuesday, 1 February 2005, at 4:49 p.m.
  1 message
• Re: Help w/ 1st spokeshave purchase *LINK* -- Dick L. -- Tuesday, 1 February 2005, at 4:52 p.m.
  1 message
• You flushed me out... -- Mike DeHart, South Jersey -- Tuesday, 1 February 2005, at 5:09 p.m.
  1 message
• That's funny Ernie -- Todd O. Cronkhite Maine Native in FL. Exile :~( -- Tuesday, 1 February 2005, at 5:51 p.m.
  1 message
• Re: Hand tool story/daughter gloat -- Jack Guzman from Maine -- Tuesday, 1 February 2005, at 5:57 p.m.
  1 message
• Hey Rob, a question on your straight edges -- Doug Littlejohn -- Tuesday, 1 February 2005, at 6:11 p.m.
  3 messages -- Newest posted Wednesday, 2 February 2005, at 7:43 a.m.
• Whatizzit? corner.... -- John Longwitz-Doraville, GA -- Tuesday, 1 February 2005, at 6:20 p.m.
  5 messages -- Newest posted Wednesday, 2 February 2005, at 10:07 a.m.
• Re: tooltray troubles -- Pam Niedermayer - Austin, TX -- Tuesday, 1 February 2005, at 6:29 p.m.
  2 messages -- Newest posted Tuesday, 1 February 2005, at 11:42 p.m.
• Re: Third choice? -- Pam Niedermayer - Austin, TX -- Tuesday, 1 February 2005, at 6:38 p.m.
  1 message
• . *NM* -- Eric Hedberg -- Tuesday, 1 February 2005, at 6:48 p.m.
  1 message
• Rob Lee/publishing old books -- Bill Sams -- Tuesday, 1 February 2005, at 7:30 p.m.
  4 messages -- Newest posted Wednesday, 2 February 2005, at 6:10 a.m.
• Re: Infill plane -- ken c -- Tuesday, 1 February 2005, at 8:06 p.m.
  3 messages -- Newest posted Tuesday, 1 February 2005, at 9:36 p.m.
• Handplane in current issue of Shopnotes *LINK* -- Nathan Pettigrew -- Tuesday, 1 February 2005, at 8:11 p.m.
  2 messages -- Newest posted Tuesday, 1 February 2005, at 10:51 p.m.
• Lignum for boxing? -- ken c -- Tuesday, 1 February 2005, at 8:32 p.m.
  9 messages -- Newest posted Wednesday, 2 February 2005, at 7:44 a.m.
• Re: A word about Wayne's planes -- Mike Schlesinger in Northern Maine -- Tuesday, 1 February 2005, at 8:56 p.m.
  2 messages -- Newest posted Tuesday, 1 February 2005, at 9:40 p.m.
• Re: Hey! -- steve knight -- Tuesday, 1 February 2005, at 10:42 p.m.
  1 message
• Eats Shoots and Leaves *LINK* -- Clay C in Miami -- Tuesday, 1 February 2005, at 10:56 p.m.
  1 message
• Re: tooltray troubles -- Jack Guzman from Maine -- Tuesday, 1 February 2005, at 11:26 p.m.
  2 messages -- Newest posted Wednesday, 2 February 2005, at 9:50 a.m.
• Woodplane done--distraction from Infill *PIC* -- ray k. -- Wednesday, 2 February 2005, at 12:48 a.m.
  2 messages -- Newest posted Wednesday, 2 February 2005, at 9:41 a.m.
• :-) *NM* -- Lyn J. Mangiameli -- Wednesday, 2 February 2005, at 1:03 a.m.
  1 message
• My attempt ... *PIC* -- Derek Cohen (in Perth, Australia) -- Wednesday, 2 February 2005, at 1:15 a.m.
  1 message
• Re: Correction and answer -- Don Thompson - Cutler Ridge, Florida -- Wednesday, 2 February 2005, at 7:35 a.m.
  1 message
• Laminated teeth -- Pam Niedermayer - Austin, TX -- Wednesday, 2 February 2005, at 7:44 a.m.
  2 messages -- Newest posted Wednesday, 2 February 2005, at 8:14 a.m.
• Jeeze, no pix? -- Don Thompson - Cutler Ridge, Florida -- Wednesday, 2 February 2005, at 8:39 a.m.
  1 message
• O/T S-10/ Hang on Gang...... -- Todd O. Cronkhite Maine Native in FL. Exile :~( -- Wednesday, 2 February 2005, at 9:07 a.m.
  1 message
• Re: Sealing weight into a joiners mallet -- Bill Houghton, cold today, Sebastopol, CA -- Friday, 30 November 2007, at 8:33 p.m.
  1 message
• Maybe fixall? -- Bill Houghton, Sebastopol, CA -- Friday, 30 November 2007, at 8:50 p.m.
  1 message
• Fixall -- Bill Houghton, Sebastopol, CA -- Friday, 30 November 2007, at 8:51 p.m.
  1 message
• Re: Sealing weight into a joiners mallet -- Edward in Vancouver -- Friday, 30 November 2007, at 8:58 p.m.
  1 message
• Silicone caulk *NM* -- Bob Hackett -- Friday, 30 November 2007, at 9:50 p.m.
  1 message
• Re: Sealing weight into a joiners mallet -- john l. blue -- Friday, 30 November 2007, at 11:14 p.m.
  1 message
• Fixall? -- Bill Houghton, Sebastopol, CA -- Friday, 30 November 2007, at 11:45 p.m.
  1 message
• Re: Sealing weight into a joiners mallet -- Phil Joines Krum, Tx -- Saturday, 1 December 2007, at 12:48 a.m.
  1 message
• Re: Sealing weight into a joiners mallet -- Ellis Walentine -- Saturday, 1 December 2007, at 3:38 a.m.
  1 message
• Re: Sealing weight into a joiners mallet -- Ellis Walentine -- Saturday, 1 December 2007, at 3:53 a.m.
  1 message
• Photo Test -- Andy Lincoln,in Dearborn,MI -- Sunday, 11 January 2009, at 9:28 a.m.
  6 messages -- Newest posted Sunday, 11 January 2009, at 1:37 p.m.
• Re: Titebond liquid hide glue - how liquid is it? -- Andy Lincoln,in Dearborn,MI -- Sunday, 11 January 2009, at 11:35 a.m.
  2 messages -- Newest posted Monday, 12 January 2009, at 5:23 p.m.
• Addicted to sharpening... -- Scott in Douglassville, PA -- Sunday, 11 January 2009, at 3:01 p.m.
  23 messages -- Newest posted Wednesday, 14 January 2009, at 7:21 a.m.
• Re: Nicholson Bench: Front chop -- Bjenk Ellefsen -- Sunday, 11 January 2009, at 3:58 p.m.
  1 message
• Re: Not free -- Pam Niedermayer, Austin, TX -- Sunday, 11 January 2009, at 5:00 p.m.
  3 messages -- Newest posted Tuesday, 13 January 2009, at 7:15 p.m.
• Drawers for fine furniture -- Patrick Gibbons, Katy, TX -- Sunday, 11 January 2009, at 5:15 p.m.
  30 messages -- Newest posted Thursday, 15 January 2009, at 9:28 p.m.
• Looks like a saw nib -- CJ -- Sunday, 11 January 2009, at 5:38 p.m.
  4 messages -- Newest posted Monday, 12 January 2009, at 5:29 p.m.
• Re: Good on Don Weber -- ThomD -- Sunday, 11 January 2009, at 6:18 p.m.
  2 messages -- Newest posted Sunday, 11 January 2009, at 6:26 p.m.
• Pitted chisel - worth the effort? *PIC* -- Scott in Douglassville, PA -- Sunday, 11 January 2009, at 6:24 p.m.
  11 messages -- Newest posted Monday, 12 January 2009, at 10:56 a.m.
• justifying expenses -- Warren in Lancaster, PA -- Sunday, 11 January 2009, at 7:20 p.m.
  2 messages -- Newest posted Monday, 12 January 2009, at 2:39 a.m.
• Some workbench top progress *PIC* -- wilbur -- Sunday, 11 January 2009, at 9:15 p.m.
  17 messages -- Newest posted Thursday, 15 January 2009, at 9:27 p.m.
• Tried my scrub plane for its "intended" use... -- Denis Chénard, Orléans, Ont. -- Monday, 12 January 2009, at 12:52 a.m.
  4 messages -- Newest posted Monday, 12 January 2009, at 10:56 p.m.
• Thanks for the link! -- Dominic in Bucks County PA -- Monday, 12 January 2009, at 8:44 a.m.
  1 message
• Meeting and watching Don was one -- Chuck Nickerson -- Monday, 12 January 2009, at 12:22 p.m.
  2 messages -- Newest posted Monday, 12 January 2009, at 2:58 p.m.
• Mounting a post drill in a building without posts -- Stephen Kirk in Quakertown PA -- Monday, 12 January 2009, at 1:04 p.m.
  17 messages -- Newest posted Thursday, 15 January 2009, at 12:10 a.m.
• Sharpening gouges -- Wiley Horne--So. Calif. -- Monday, 12 January 2009, at 2:55 p.m.
  14 messages -- Newest posted Tuesday, 13 January 2009, at 7:45 p.m.
• Re: Good on Don Weber -- Dan Moening -- Monday, 12 January 2009, at 2:55 p.m.
  1 message
• Re: Good on Don Weber -- Glenn Madsen near San Francisco -- Monday, 12 January 2009, at 3:08 p.m.
  1 message
• Do it -- roninkokomo -- Monday, 12 January 2009, at 3:39 p.m.
  1 message
• Re: Thank You! -- Greg Bétit, Crown Point, NY. -- Monday, 12 January 2009, at 5:18 p.m.
  2 messages -- Newest posted Tuesday, 13 January 2009, at 12:53 p.m.
• Sharpening "memory" from ~40 years ago... -- John Aniano in Central NJ... -- Monday, 12 January 2009, at 9:32 p.m.
  3 messages -- Newest posted Tuesday, 13 January 2009, at 9:33 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 13 January 2009, at 9:45 a.m.
  1 message
• Please hold your applause, thank you *LINK* -- Marv....... Northern California Lake Co. -- Tuesday, 13 January 2009, at 10:14 a.m.
  17 messages -- Newest posted Thursday, 15 January 2009, at 7:42 p.m.
• Making a workbench top without a workbench - pics -- wilbur -- Tuesday, 13 January 2009, at 10:53 a.m.
  13 messages -- Newest posted Thursday, 15 January 2009, at 12:25 a.m.
• Bally Block Trip Again -- Mike Jurnigan in Suffolk -- Tuesday, 13 January 2009, at 12:32 p.m.
  4 messages -- Newest posted Wednesday, 14 January 2009, at 9:18 p.m.
• Old Plane ID Help *PIC* -- Chako -- Tuesday, 13 January 2009, at 3:18 p.m.
  6 messages -- Newest posted Wednesday, 14 January 2009, at 10:54 p.m.
• Dovetail DVDs - Recommendations? -- Scott in Douglassville, PA -- Tuesday, 13 January 2009, at 3:57 p.m.
  17 messages -- Newest posted Thursday, 15 January 2009, at 10:11 p.m.
• I just read the Schwarz commentary on Moxon -- Bill Houghton, Sebastopol, CA -- Tuesday, 13 January 2009, at 4:06 p.m.
  56 messages -- Newest posted Wednesday, 21 January 2009, at 6:42 a.m.
• drill press -- Jerry Gibbs -- Tuesday, 13 January 2009, at 6:10 p.m.
  6 messages -- Newest posted Friday, 16 January 2009, at 12:36 a.m.
• Still Not Done....but gettin thar! *PIC* -- Frank Mutchler -- Tuesday, 13 January 2009, at 6:25 p.m.
  7 messages -- Newest posted Saturday, 17 January 2009, at 9:49 p.m.
• Stupid question... -- Scott in Douglassville, PA -- Tuesday, 13 January 2009, at 8:48 p.m.
  1 message
• How do you make drawer sides? -- Patrick Gibbons, Katy, TX -- Wednesday, 14 January 2009, at 10:21 a.m.
  33 messages -- Newest posted Monday, 19 January 2009, at 11:28 p.m.
• Rural Quebec Farm House Interior Wood Paneling -- Jim Shaver - Oakville, Ont -- Wednesday, 14 January 2009, at 12:52 p.m.
  25 messages -- Newest posted Friday, 23 January 2009, at 8:38 p.m.
• Gramercy kit saws *PIC* -- David in Indy -- Wednesday, 14 January 2009, at 1:43 p.m.
  9 messages -- Newest posted Friday, 16 January 2009, at 1:05 a.m.
• OT - mystery book -- Bill Houghton, Sebastopol, CA -- Wednesday, 14 January 2009, at 3:32 p.m.
  4 messages -- Newest posted Friday, 16 January 2009, at 1:07 a.m.
• Furniture exhibits -- John Hoffman -- Thursday, 15 January 2009, at 8:45 a.m.
  12 messages -- Newest posted Saturday, 17 January 2009, at 11:08 p.m.
• If Roy can be a saint... *LINK* *PIC* -- Stephen Shepherd in the State of Deseret -- Thursday, 15 January 2009, at 11:31 a.m.
  1 message
• Finish for a mallet? *PIC* -- Scott in Douglassville, PA -- Thursday, 15 January 2009, at 11:35 a.m.
  17 messages -- Newest posted Monday, 19 January 2009, at 11:37 p.m.
• glue curing and really cold temps -- Bruce, a MN Galoot -- Thursday, 15 January 2009, at 1:36 p.m.
  10 messages -- Newest posted Friday, 16 January 2009, at 9:01 a.m.
• Chisel info, puh-leeze! -- Scott in Douglassville, PA -- Thursday, 15 January 2009, at 5:23 p.m.
  14 messages -- Newest posted Sunday, 18 January 2009, at 2:38 p.m.
• why I need several sizes of Yankee screwdrivers -- Bill Houghton, Sebastopol, CA -- Thursday, 15 January 2009, at 6:51 p.m.
  2 messages -- Newest posted Friday, 16 January 2009, at 1:06 p.m.
• Workbench placement in workshop *PIC* -- wilbur -- Thursday, 15 January 2009, at 10:23 p.m.
  24 messages -- Newest posted Sunday, 18 January 2009, at 4:44 p.m.
• One of the most incredible things I've ever seen!! -- Larry_Wyatt(Cole's Dad) -- Friday, 16 January 2009, at 9:00 a.m.
  4 messages -- Newest posted Saturday, 17 January 2009, at 8:22 a.m.
• PW magazine -- Derek Cohen (in Perth, Australia) -- Friday, 16 January 2009, at 11:11 a.m.
  24 messages -- Newest posted Wednesday, 21 January 2009, at 6:39 a.m.
• Somewhat OT general self-rant: Will I EVER learn? -- Bill Houghton, Sebastopol, CA -- Friday, 16 January 2009, at 3:58 p.m.
  5 messages -- Newest posted Wednesday, 21 January 2009, at 10:34 p.m.
• Conundrum. Help please! *PIC* -- Larry_Wyatt(Cole's Dad) -- Friday, 16 January 2009, at 5:30 p.m.
  11 messages -- Newest posted Sunday, 18 January 2009, at 9:16 p.m.
• Fun for kids! *PIC* -- Larry_Wyatt(Cole's Dad) -- Friday, 16 January 2009, at 5:41 p.m.
  6 messages -- Newest posted Monday, 19 January 2009, at 4:02 p.m.
• Novice Questions -- Robert Rothman -- Friday, 16 January 2009, at 8:40 p.m.
  14 messages -- Newest posted Monday, 19 January 2009, at 9:54 p.m.
• Mortice chisels, which ones? -- Hamish -- Saturday, 17 January 2009, at 7:34 a.m.
  21 messages -- Newest posted Monday, 19 January 2009, at 9:30 a.m.
• Squaring a corner with hand planes is easy - pics! -- wilbur -- Saturday, 17 January 2009, at 11:44 a.m.
  8 messages -- Newest posted Monday, 19 January 2009, at 11:41 p.m.
• Ultimate Burnisher Update -- Andy Lincoln,in Dearborn,MI -- Saturday, 17 January 2009, at 11:53 a.m.
  3 messages -- Newest posted Sunday, 18 January 2009, at 1:00 a.m.
• Firmer chisels -- Guy -- Saturday, 17 January 2009, at 12:29 p.m.
  10 messages -- Newest posted Tuesday, 20 January 2009, at 11:56 a.m.
• Parks Planer -- Jarrad -- Saturday, 17 January 2009, at 7:03 p.m.
  2 messages -- Newest posted Saturday, 17 January 2009, at 7:13 p.m.
• NEW Shop Shots - #893 - #897 -- David Yoho -- Monday, 19 January 2009, at 8:00 a.m.
  1 message
• Headed off to surgery later today -- Bill Houghton, Sebastopol, CA -- Monday, 19 January 2009, at 1:07 p.m.
  26 messages -- Newest posted Thursday, 22 January 2009, at 10:24 a.m.
• Any German speakers? - Toronto, freebie *PIC* -- ThomD -- Monday, 19 January 2009, at 2:29 p.m.
  6 messages -- Newest posted Friday, 23 January 2009, at 10:16 a.m.
• Whew! - pics -- wilbur -- Monday, 19 January 2009, at 9:40 p.m.
  23 messages -- Newest posted Wednesday, 21 January 2009, at 12:09 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 20 January 2009, at 8:10 a.m.
  1 message
• Replacement wheels for a WC Horz Wet Grinder? -- Dominic in Buck's County PA -- Tuesday, 20 January 2009, at 8:58 p.m.
  1 message
• Fireplace surround project pictures... -- John Aniano in central NJ... -- Tuesday, 20 January 2009, at 10:08 p.m.
  14 messages -- Newest posted Friday, 23 January 2009, at 11:57 p.m.
• More benchtop progress - pics -- wilbur -- Wednesday, 21 January 2009, at 7:43 a.m.
  18 messages -- Newest posted Thursday, 22 January 2009, at 9:41 p.m.
• Not quite fine woodwork, but fine wood. -- Derek Cohen (in Perth, Australia) -- Wednesday, 21 January 2009, at 11:00 a.m.
  10 messages -- Newest posted Friday, 23 January 2009, at 8:39 p.m.
• Burnishing Rod -- Bob in Green Bay -- Wednesday, 21 January 2009, at 4:32 p.m.
  5 messages -- Newest posted Wednesday, 21 January 2009, at 7:19 p.m.
• shaker chair stock -- chuckbeck in cent il -- Wednesday, 21 January 2009, at 8:35 p.m.
  16 messages -- Newest posted Monday, 26 January 2009, at 12:32 a.m.
• Cyclone dust collectors and plane shavings? -- wilbur -- Thursday, 22 January 2009, at 10:15 a.m.
  7 messages -- Newest posted Friday, 23 January 2009, at 8:46 a.m.
• Politics for a *bit* -- Larry_Wyatt(Cole's Dad) -- Thursday, 22 January 2009, at 8:23 p.m.
  9 messages -- Newest posted Friday, 23 January 2009, at 3:53 p.m.
• OCD much? -- James Watriss -- Thursday, 22 January 2009, at 8:36 p.m.
  10 messages -- Newest posted Tuesday, 27 January 2009, at 11:40 p.m.
• Letting the benchtop settle in -- wilbur -- Thursday, 22 January 2009, at 11:19 p.m.
  17 messages -- Newest posted Tuesday, 27 January 2009, at 8:39 a.m.
• [AD]--Philadelphia Open House--[AD] *LINK* -- Ellis Walentine, Host -- Friday, 23 January 2009, at 9:47 a.m.
  5 messages -- Newest posted Wednesday, 28 January 2009, at 10:44 a.m.
• OT - back from surgery-land -- Bill Houghton, Sebastopol, CA -- Friday, 23 January 2009, at 12:10 p.m.
  22 messages -- Newest posted Monday, 26 January 2009, at 1:20 p.m.
• Panama Clock Project--glue problems *PIC* -- Jack Guzman from Maine -- Friday, 23 January 2009, at 2:09 p.m.
  14 messages -- Newest posted Saturday, 24 January 2009, at 4:05 p.m.
• Clock pic, as requested *LINK* -- Larry_Wyatt(Cole's Dad) -- Friday, 23 January 2009, at 8:08 p.m.
  3 messages -- Newest posted Saturday, 24 January 2009, at 9:18 a.m.
• Ever make a tool you just don't use? *PIC* -- Stephen Shepherd in the State of Deseret -- Saturday, 24 January 2009, at 8:10 a.m.
  22 messages -- Newest posted Wednesday, 28 January 2009, at 11:46 p.m.
• Drawboring video -- Larry_Wyatt(Cole's Dad) -- Saturday, 24 January 2009, at 10:26 a.m.
  3 messages -- Newest posted Saturday, 24 January 2009, at 6:36 p.m.
• Nicholson Cabinet Rasps for sale in Classifieds -- Michael Stadulis in Southern NJ -- Saturday, 24 January 2009, at 5:26 p.m.
  1 message
• More thoughts on Wilbur's bench -- Bill Tindall, E.TN -- Saturday, 24 January 2009, at 5:46 p.m.
  4 messages -- Newest posted Sunday, 25 January 2009, at 8:30 a.m.
• What good is a #6? -- Joe McMahon -- Saturday, 24 January 2009, at 9:08 p.m.
  29 messages -- Newest posted Tuesday, 27 January 2009, at 7:54 a.m.
• Homage to our significant others *LINK* -- Larry_Wyatt(Cole's Dad) -- Sunday, 25 January 2009, at 12:04 p.m.
  3 messages -- Newest posted Sunday, 25 January 2009, at 9:37 p.m.
• Making my carcass groovy; A question -- Patrick Gibbons, Katy, TX -- Sunday, 25 January 2009, at 4:22 p.m.
  4 messages -- Newest posted Monday, 26 January 2009, at 9:36 a.m.
• Blade grind - flat vs cambered -- Andrew F in Australia -- Sunday, 25 January 2009, at 5:05 p.m.
  40 messages -- Newest posted Thursday, 5 February 2009, at 7:51 a.m.
• Refurbed Bdrock 605 1/2 & 606 -- Dominic in Buck's County PA -- Sunday, 25 January 2009, at 7:44 p.m.
  18 messages -- Newest posted Tuesday, 27 January 2009, at 11:37 p.m.
• New chisels from Stanley? Maybe? *LINK* -- Scott in Montana -- Sunday, 25 January 2009, at 11:31 p.m.
  2 messages -- Newest posted Tuesday, 27 January 2009, at 11:45 p.m.
• Guest Chat Tonight *LINK* -- Ellis Walentine, Host -- Monday, 26 January 2009, at 6:09 a.m.
  1 message
• NEW Shop Shots - #898 - #900 -- David Yoho -- Monday, 26 January 2009, at 7:41 a.m.
  1 message
• Workbench leg glue up question *PIC* -- wilbur -- Monday, 26 January 2009, at 9:46 a.m.
  14 messages -- Newest posted Tuesday, 27 January 2009, at 11:50 p.m.
• *** SURVEY: THE IDES OF JANUARY +10 *** -- Ellis Walentine, Host -- Monday, 26 January 2009, at 12:54 p.m.
  12 messages -- Newest posted Tuesday, 27 January 2009, at 3:02 p.m.
• Cushions for Morris Chair -- roninkokomo -- Monday, 26 January 2009, at 4:10 p.m.
  15 messages -- Newest posted Wednesday, 28 January 2009, at 11:26 a.m.
• Mystery tool... -- James Watriss -- Monday, 26 January 2009, at 8:28 p.m.
  5 messages -- Newest posted Tuesday, 27 January 2009, at 8:36 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 27 January 2009, at 8:21 a.m.
  1 message
• PPI for Stair Saw -- Patrick Gibbons, Katy, TX -- Tuesday, 27 January 2009, at 12:22 p.m.
  19 messages -- Newest posted Saturday, 31 January 2009, at 8:28 a.m.
• Wood Plane display -- Ken Bleadow -- Tuesday, 27 January 2009, at 7:25 p.m.
  7 messages -- Newest posted Thursday, 29 January 2009, at 9:41 a.m.
• Need some info on workbenches -- Stuart Hough -- Wednesday, 28 January 2009, at 2:16 a.m.
  9 messages -- Newest posted Thursday, 29 January 2009, at 6:59 p.m.
• Bench on hiatus -- wilbur -- Wednesday, 28 January 2009, at 9:52 a.m.
  13 messages -- Newest posted Thursday, 29 January 2009, at 6:57 p.m.
• Woodriver planes? *LINK* -- Christopher Fitch @ Memphis -- Wednesday, 28 January 2009, at 6:01 p.m.
  6 messages -- Newest posted Thursday, 29 January 2009, at 10:24 a.m.
• [AD]--Philadelphia Open House--[AD] *LINK* -- Ellis Walentine, Host -- Thursday, 29 January 2009, at 8:16 a.m.
  8 messages -- Newest posted Friday, 30 January 2009, at 9:05 p.m.
• help needed -- roninkokomo -- Thursday, 29 January 2009, at 10:03 a.m.
  26 messages -- Newest posted Saturday, 31 January 2009, at 3:28 p.m.
• The Village Carpenter $9.95 *LINK* -- David Cockey -- Thursday, 29 January 2009, at 7:45 p.m.
  4 messages -- Newest posted Saturday, 31 January 2009, at 3:24 p.m.
• Veritas Fore Plane on Benefit Auction -- James Watriss -- Thursday, 29 January 2009, at 7:46 p.m.
  2 messages -- Newest posted Friday, 30 January 2009, at 11:10 p.m.
• Stanley #750 chisels -- Ellis Walentine, Host -- Thursday, 29 January 2009, at 9:26 p.m.
  2 messages -- Newest posted Thursday, 29 January 2009, at 10:11 p.m.
• parts for Miller Falls brest drill No 87/97 -- john casad -- Friday, 30 January 2009, at 1:52 p.m.
  3 messages -- Newest posted Saturday, 31 January 2009, at 9:53 p.m.
• Miller Patent Plough Plane Tutorial? -- Dean Lapinel -- Friday, 30 January 2009, at 11:20 p.m.
  19 messages -- Newest posted Sunday, 1 February 2009, at 1:43 p.m.
• Woodwork magazine - reading the tea leaves -- Bill Houghton, Sebastopol, CA -- Saturday, 31 January 2009, at 6:45 p.m.
  11 messages -- Newest posted Saturday, 7 February 2009, at 10:51 a.m.
• Next Tool? -- JDubbs -- Saturday, 31 January 2009, at 9:54 p.m.
  21 messages -- Newest posted Tuesday, 3 February 2009, at 9:06 a.m.
• jointing techniques -- paul womack -- Monday, 2 February 2009, at 5:25 a.m.
  76 messages -- Newest posted Friday, 6 February 2009, at 8:26 a.m.
• Purple QSWO? -- Joe McMahon -- Monday, 2 February 2009, at 2:08 p.m.
  12 messages -- Newest posted Thursday, 5 February 2009, at 1:43 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 3 February 2009, at 7:16 a.m.
  1 message
• new project- a table *PIC* -- Bill Tindall, E.TN -- Tuesday, 3 February 2009, at 3:21 p.m.
  10 messages -- Newest posted Thursday, 5 February 2009, at 4:31 p.m.
• Worksharp -- John Hoffman -- Tuesday, 3 February 2009, at 4:01 p.m.
  5 messages -- Newest posted Wednesday, 4 February 2009, at 10:13 p.m.
• REAL DEAL ON SORBY DRAW KNIFE -- Chicago Bob -- Wednesday, 4 February 2009, at 1:20 p.m.
  7 messages -- Newest posted Thursday, 5 February 2009, at 9:12 p.m.
• A Chairmaker's Travisher question -- Glenn Madsen near San Francisco -- Wednesday, 4 February 2009, at 3:47 p.m.
  24 messages -- Newest posted Sunday, 8 February 2009, at 9:35 p.m.
• Any word yet on the..... -- Larry_Wyatt(Cole's Dad) -- Wednesday, 4 February 2009, at 9:24 p.m.
  2 messages -- Newest posted Wednesday, 4 February 2009, at 9:46 p.m.
• I can't believe I'm the lead bidder on this plane *LINK* -- Bill Houghton, Sebastopol, CA -- Thursday, 5 February 2009, at 5:38 p.m.
  4 messages -- Newest posted Saturday, 7 February 2009, at 11:35 a.m.
• For you eastern handtool junkies... -- Steven Kubien -- Thursday, 5 February 2009, at 8:43 p.m.
  5 messages -- Newest posted Saturday, 7 February 2009, at 4:04 p.m.
• Bitten again... *PIC* -- James Watriss -- Thursday, 5 February 2009, at 9:05 p.m.
  9 messages -- Newest posted Saturday, 7 February 2009, at 5:37 p.m.
• Stupid, stupid, stupid... -- Edward in Vancouver -- Thursday, 5 February 2009, at 10:05 p.m.
  17 messages -- Newest posted Monday, 9 February 2009, at 2:01 p.m.
• Stanley 81 vs. 80 -- Bill Houghton, Sebastopol, CA -- Friday, 6 February 2009, at 8:26 a.m.
  8 messages -- Newest posted Saturday, 7 February 2009, at 2:15 p.m.
• Problems Planing Cherry Cabinet Top -- Paul Leuba - Hunt Valley, MD -- Friday, 6 February 2009, at 6:49 p.m.
  23 messages -- Newest posted Monday, 9 February 2009, at 8:00 p.m.
• Ol' Draw Knife.... -- John L. Blue -- Friday, 6 February 2009, at 11:36 p.m.
  14 messages -- Newest posted Sunday, 8 February 2009, at 2:11 p.m.
• Stanley combination plane -- Hamish -- Saturday, 7 February 2009, at 5:42 p.m.
  6 messages -- Newest posted Saturday, 7 February 2009, at 9:36 p.m.
• Sharpening skewed blades -- Joseph Grittani -- Saturday, 7 February 2009, at 7:03 p.m.
  6 messages -- Newest posted Tuesday, 10 February 2009, at 12:46 p.m.
• Wood Stretcher -- Frank Mutchler -- Saturday, 7 February 2009, at 7:46 p.m.
  3 messages -- Newest posted Sunday, 8 February 2009, at 9:24 p.m.
• Got Glue? *PIC* -- Stephen Shepherd in the State of Deseret -- Sunday, 8 February 2009, at 6:28 a.m.
  3 messages -- Newest posted Sunday, 8 February 2009, at 10:23 a.m.
• Itty Bitty Chairs... *PIC* -- Scott in Douglassville, PA -- Sunday, 8 February 2009, at 6:39 p.m.
  12 messages -- Newest posted Tuesday, 10 February 2009, at 12:36 p.m.
• Finally, some movement on the workbench! -- Stuart Hough -- Sunday, 8 February 2009, at 9:19 p.m.
  23 messages -- Newest posted Tuesday, 10 February 2009, at 5:50 p.m.
• ADMIN! Resolving this situation -- Wiley Horne--So. Calif. -- Monday, 9 February 2009, at 9:50 p.m.
  1 message
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 10 February 2009, at 7:54 a.m.
  1 message
• Making wooden planes -- beech vs. other species? -- wilbur -- Tuesday, 10 February 2009, at 4:57 p.m.
  26 messages -- Newest posted Thursday, 12 February 2009, at 7:37 p.m.
• rose wood for handles -- Wayne Carson -- Tuesday, 10 February 2009, at 6:29 p.m.
  3 messages -- Newest posted Tuesday, 10 February 2009, at 9:29 p.m.
• Kayoko's Imai sword steel chisels... where? -- James Watriss -- Tuesday, 10 February 2009, at 7:03 p.m.
  31 messages -- Newest posted Tuesday, 17 February 2009, at 4:16 p.m.
• Got my tools somewhat organized -- wilbur -- Tuesday, 10 February 2009, at 11:17 p.m.
  59 messages -- Newest posted Monday, 16 February 2009, at 11:26 a.m.
• Nice old work -- virtual tour -- Larry Williams -- Wednesday, 11 February 2009, at 9:46 a.m.
  10 messages -- Newest posted Thursday, 12 February 2009, at 12:07 p.m.
• OT - to our friends in Oz -- Bill Houghton, Sebastopol, CA -- Wednesday, 11 February 2009, at 4:51 p.m.
  2 messages -- Newest posted Thursday, 12 February 2009, at 12:48 a.m.
• Pssst! Wanna see spme pretty cherry? -- Hank Knight -- Wednesday, 11 February 2009, at 5:33 p.m.
  56 messages -- Newest posted Monday, 16 February 2009, at 1:37 p.m.
• Newest issue of "Woodwork" arrived -- Bill Houghton, Sebastopol, CA -- Thursday, 12 February 2009, at 5:33 p.m.
  27 messages -- Newest posted Monday, 23 February 2009, at 11:39 p.m.
• Stickley Table Tenon....help, please... *PIC* -- Frank Mutchler -- Thursday, 12 February 2009, at 10:08 p.m.
  18 messages -- Newest posted Sunday, 15 February 2009, at 10:01 a.m.
• OCD much... update *PIC* -- James Watriss -- Thursday, 12 February 2009, at 10:46 p.m.
  15 messages -- Newest posted Monday, 16 February 2009, at 9:12 p.m.
• Interesting Book *LINK* -- Dan Donaldson -- Friday, 13 February 2009, at 12:02 a.m.
  7 messages -- Newest posted Saturday, 14 February 2009, at 11:49 p.m.
• Sandin' , Sharpenin'.. -- John L. Blue -- Friday, 13 February 2009, at 11:29 p.m.
  5 messages -- Newest posted Monday, 16 February 2009, at 1:20 p.m.
• One more day on the Fore Plane -- James Watriss -- Saturday, 14 February 2009, at 11:52 a.m.
  1 message
• drying tree slices???? -- George in Lowell, Mich -- Saturday, 14 February 2009, at 4:36 p.m.
  7 messages -- Newest posted Sunday, 15 February 2009, at 11:41 a.m.
• Lie-Nielsen's new hammers. Hardened or Not? -- Scott in Montana -- Saturday, 14 February 2009, at 4:51 p.m.
  26 messages -- Newest posted Monday, 16 February 2009, at 5:56 p.m.
• Mostly OT - Japanese knife making *LINK* -- Denny -- Saturday, 14 February 2009, at 5:07 p.m.
  3 messages -- Newest posted Sunday, 15 February 2009, at 3:27 p.m.
• Veritas small router *LINK* -- Bill Houghton, Sebastopol, CA -- Saturday, 14 February 2009, at 5:51 p.m.
  15 messages -- Newest posted Sunday, 15 February 2009, at 8:27 a.m.
• Japanese Hammer *PIC* -- Fred Peake -- Saturday, 14 February 2009, at 10:44 p.m.
  14 messages -- Newest posted Monday, 16 February 2009, at 6:45 p.m.
• Thick Maple Bench top -- Jeff Johnson -- Sunday, 15 February 2009, at 4:42 p.m.
  12 messages -- Newest posted Tuesday, 17 February 2009, at 3:44 p.m.
• Rust questions: block plane *PIC* -- Bill Houghton, Sebastopol, CA -- Monday, 16 February 2009, at 1:12 p.m.
  7 messages -- Newest posted Tuesday, 17 February 2009, at 6:29 p.m.
• Rust question - well, sort of - woodie spokeshave *PIC* -- Bill Houghton, Sebastopol, CA -- Monday, 16 February 2009, at 1:18 p.m.
  8 messages -- Newest posted Wednesday, 18 February 2009, at 8:35 a.m.
• Benefit Auction: LN 40-1/2 Scrub Plane IOB -- Wiley Horne--So. Calif. -- Monday, 16 February 2009, at 4:33 p.m.
  2 messages -- Newest posted Tuesday, 17 February 2009, at 4:02 p.m.
• Sigh - Fine Woodworking is NOT the mag it was -- Bill Houghton, Sebastopol, CA -- Monday, 16 February 2009, at 5:43 p.m.
  33 messages -- Newest posted Thursday, 19 February 2009, at 6:21 p.m.
• OT some neat pictures *LINK* -- Dan Donaldson -- Monday, 16 February 2009, at 10:45 p.m.
  5 messages -- Newest posted Wednesday, 18 February 2009, at 9:21 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 17 February 2009, at 7:49 a.m.
  1 message
• Another Panther Saw *PIC* -- Darrell in Oakville -- Tuesday, 17 February 2009, at 6:14 p.m.
  11 messages -- Newest posted Wednesday, 18 February 2009, at 11:09 p.m.
• Looking for info on a grasshopper gate. -- Chuck Nickerson -- Tuesday, 17 February 2009, at 7:34 p.m.
  10 messages -- Newest posted Thursday, 19 February 2009, at 10:57 p.m.
• Drawknife *PIC* -- Stephen Shepherd in the State of Deseret -- Wednesday, 18 February 2009, at 8:57 a.m.
  4 messages -- Newest posted Wednesday, 18 February 2009, at 11:39 p.m.
• "Hot Dog " for a #3 . . . *PIC* -- steve mackay -- Wednesday, 18 February 2009, at 11:27 a.m.
  2 messages -- Newest posted Wednesday, 18 February 2009, at 12:10 p.m.
• New site for Record tools history *LINK* -- Bob Demers -- Wednesday, 18 February 2009, at 1:00 p.m.
  15 messages -- Newest posted Saturday, 21 February 2009, at 1:24 a.m.
• dozuki broken teeth -- Jerry Gibbs -- Wednesday, 18 February 2009, at 5:12 p.m.
  69 messages -- Newest posted Thursday, 26 February 2009, at 5:30 a.m.
• Currently on the Benefits Auction page! -- Bill Houghton, Sebastopol, CA -- Wednesday, 18 February 2009, at 6:11 p.m.
  1 message
• Hey, Rob ... -- Pam Niedermayer, Austin, TX -- Wednesday, 18 February 2009, at 7:25 p.m.
  35 messages -- Newest posted Saturday, 21 February 2009, at 4:35 p.m.
• Oh Mr. Lang you out there? -- Scott Burr in Ben Lomond, CA -- Wednesday, 18 February 2009, at 10:44 p.m.
  14 messages -- Newest posted Friday, 20 February 2009, at 2:07 a.m.
• wood + PEG ????? -- George in Lowell, Michigan -- Thursday, 19 February 2009, at 4:43 a.m.
  13 messages -- Newest posted Sunday, 22 February 2009, at 7:41 p.m.
• Rockwell/Delta 34-450 -- Jarrad -- Thursday, 19 February 2009, at 9:51 a.m.
  6 messages -- Newest posted Thursday, 19 February 2009, at 10:14 p.m.
• Handyman Club of America -- Jack Guzman from Maine -- Thursday, 19 February 2009, at 12:18 p.m.
  7 messages -- Newest posted Friday, 20 February 2009, at 2:14 a.m.
• New entertainment Center *PIC* -- Dave Tenney -- Friday, 20 February 2009, at 12:33 p.m.
  6 messages -- Newest posted Friday, 27 February 2009, at 9:53 p.m.
• learning to plane -- Jerry Gibbs -- Friday, 20 February 2009, at 9:39 p.m.
  27 messages -- Newest posted Sunday, 22 February 2009, at 7:32 p.m.
• Electrolysis Improvement *PIC* -- Tom MacGregor -- Saturday, 21 February 2009, at 4:11 p.m.
  5 messages -- Newest posted Sunday, 22 February 2009, at 8:33 p.m.
• Need Help on a Goodell-Pratt Hand Drill *PIC* -- Marc in Luxembourg -- Saturday, 21 February 2009, at 4:55 p.m.
  15 messages -- Newest posted Tuesday, 24 February 2009, at 9:39 a.m.
• My tool of the week (long and a little silly) *PIC* -- Bill Houghton, Sebastopol, CA -- Saturday, 21 February 2009, at 6:28 p.m.
  12 messages -- Newest posted Monday, 23 February 2009, at 1:55 a.m.
• Fluted drill points -- Patrick Gibbons, Katy, TX -- Saturday, 21 February 2009, at 9:05 p.m.
  3 messages -- Newest posted Sunday, 22 February 2009, at 2:04 p.m.
• Question about eggbeaters *PIC* -- Derek Cohen (in Perth, Australia) -- Saturday, 21 February 2009, at 9:15 p.m.
  17 messages -- Newest posted Monday, 23 February 2009, at 12:37 p.m.
• OT - my appliances are against me -- Bill Houghton, Sebastopol, CA -- Sunday, 22 February 2009, at 2:02 p.m.
  23 messages -- Newest posted Saturday, 28 February 2009, at 1:14 a.m.
• Which weighs more? -- Stephen Shepherd in the State of Deseret -- Sunday, 22 February 2009, at 4:41 p.m.
  10 messages -- Newest posted Tuesday, 24 February 2009, at 10:17 a.m.
• Honing compound. Veritas Green or Veritas Gold -- Victor Parisian -- Sunday, 22 February 2009, at 7:07 p.m.
  11 messages -- Newest posted Tuesday, 24 February 2009, at 9:47 p.m.
• molding planes -- Wayne Carson -- Sunday, 22 February 2009, at 11:01 p.m.
  7 messages -- Newest posted Monday, 23 February 2009, at 11:14 a.m.
• Finish for plywood work table (NOT mine!)? -- Dominic in Bucks County PA -- Monday, 23 February 2009, at 8:23 a.m.
  9 messages -- Newest posted Tuesday, 24 February 2009, at 9:41 p.m.
• Clifton 2 piece chipbreaker for Stanley planes? -- wilbur -- Monday, 23 February 2009, at 8:47 a.m.
  11 messages -- Newest posted Tuesday, 24 February 2009, at 7:10 a.m.
• Stanley 750ish chisels -- Bill Houghton, Sebastopol, CA -- Monday, 23 February 2009, at 2:56 p.m.
  6 messages -- Newest posted Tuesday, 24 February 2009, at 3:34 a.m.
• OT - the virtues of feet in locating objects -- Bill Houghton, Sebastopol, CA -- Monday, 23 February 2009, at 3:32 p.m.
  11 messages -- Newest posted Sunday, 1 March 2009, at 10:13 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 24 February 2009, at 7:14 a.m.
  1 message
• Stanley 151 spokeshave blade made by LV *LINK* -- JL -- Tuesday, 24 February 2009, at 10:04 a.m.
  7 messages -- Newest posted Wednesday, 25 February 2009, at 10:37 p.m.
• Woodworking In The Movies -- R.J. Whelan -- Tuesday, 24 February 2009, at 3:07 p.m.
  40 messages -- Newest posted Thursday, 5 March 2009, at 11:10 p.m.
• Mr. Wenzloff's Benefit Auction -- Wiley Horne--So. Calif. -- Tuesday, 24 February 2009, at 8:41 p.m.
  4 messages -- Newest posted Wednesday, 25 February 2009, at 10:59 p.m.
• Coffee Time *PIC* -- ThomD -- Tuesday, 24 February 2009, at 11:11 p.m.
  14 messages -- Newest posted Saturday, 28 February 2009, at 12:14 a.m.
• Frame and panel + dovetails? -- wilbur -- Wednesday, 25 February 2009, at 9:06 a.m.
  13 messages -- Newest posted Thursday, 26 February 2009, at 2:51 p.m.
• OT - an offbeat indicator of the economy -- Bill Houghton, Sebastopol, CA -- Wednesday, 25 February 2009, at 3:45 p.m.
  7 messages -- Newest posted Thursday, 26 February 2009, at 2:01 p.m.
• T minus 170 days and counting... (longish) -- Denis Chénard, Orléans, Ont. -- Wednesday, 25 February 2009, at 7:40 p.m.
  30 messages -- Newest posted Friday, 27 February 2009, at 12:26 a.m.
• What is the best smelling wood you have worked? -- Alan DuBoff -- Thursday, 26 February 2009, at 5:05 p.m.
  49 messages -- Newest posted Friday, 6 March 2009, at 2:14 p.m.
• Rob Lee > Unplugged -- Jim Shaver - Oakville, Ont -- Friday, 27 February 2009, at 9:37 a.m.
  25 messages -- Newest posted Friday, 13 March 2009, at 7:39 p.m.
• Scrapers from Scrap steel? -- Dominic in Bucks County PA -- Friday, 27 February 2009, at 10:44 a.m.
  12 messages -- Newest posted Sunday, 1 March 2009, at 1:51 p.m.
• OT ultimate wooden puzzle *NM* *LINK* -- Dan Donaldson -- Friday, 27 February 2009, at 1:08 p.m.
  4 messages -- Newest posted Sunday, 1 March 2009, at 2:33 p.m.
• *** Visitor Survey -- Win a T-Shirt *** *LINK* -- Ellis Walentine, Host -- Friday, 27 February 2009, at 1:42 p.m.
  1 message
• Estate sale chicken game -- Bill Houghton, Sebastopol, CA -- Friday, 27 February 2009, at 8:39 p.m.
  5 messages -- Newest posted Monday, 2 March 2009, at 12:35 p.m.
• Sad news from Woodwork magazine. No Summer issue. -- Scott in Montana -- Friday, 27 February 2009, at 8:58 p.m.
  3 messages -- Newest posted Sunday, 1 March 2009, at 2:46 p.m.
• Follow up on stuck eggbeater chuck -- Derek Cohen (in Perth, Australia) -- Saturday, 28 February 2009, at 8:21 a.m.
  4 messages -- Newest posted Saturday, 28 February 2009, at 11:43 a.m.
• Parks planer -- Wesley -- Saturday, 28 February 2009, at 8:57 a.m.
  3 messages -- Newest posted Saturday, 28 February 2009, at 12:01 p.m.
• A bit of She-oak, add some brass and ... *PIC* -- Derek Cohen (in Perth, Australia) -- Saturday, 28 February 2009, at 9:39 a.m.
  15 messages -- Newest posted Tuesday, 3 March 2009, at 12:14 a.m.
• Workbench: Step 1 *PIC* -- Mark in Texas -- Saturday, 28 February 2009, at 11:05 a.m.
  9 messages -- Newest posted Monday, 2 March 2009, at 10:45 p.m.
• Stanley's records . . . -- steve mackay -- Saturday, 28 February 2009, at 3:11 p.m.
  3 messages -- Newest posted Sunday, 1 March 2009, at 9:14 a.m.
• OT - scratched DVDs - Fix? -- Denis Chénard, Orléans, Ont. -- Saturday, 28 February 2009, at 3:19 p.m.
  7 messages -- Newest posted Monday, 2 March 2009, at 9:59 a.m.
• Disson Saw No. 240 Metal Cutting *PIC* -- -e- -- Saturday, 28 February 2009, at 11:24 p.m.
  8 messages -- Newest posted Sunday, 1 March 2009, at 8:38 p.m.
• Stanley No 6 and a couple of 60 1/2 *PIC* -- -e- -- Saturday, 28 February 2009, at 11:26 p.m.
  8 messages -- Newest posted Sunday, 1 March 2009, at 1:57 p.m.
• Mystery Plane *PIC* -- -e- -- Saturday, 28 February 2009, at 11:28 p.m.
  12 messages -- Newest posted Tuesday, 3 March 2009, at 10:36 a.m.
• almost new yankee 31a ..$15? *PIC* -- -e- -- Saturday, 28 February 2009, at 11:33 p.m.
  4 messages -- Newest posted Sunday, 1 March 2009, at 12:55 p.m.
• another mystery plane *PIC* -- -e- -- Sunday, 1 March 2009, at 8:25 a.m.
  8 messages -- Newest posted Sunday, 1 March 2009, at 4:29 p.m.
• starting price for set of these *PIC* -- -e- -- Sunday, 1 March 2009, at 1:11 p.m.
  3 messages -- Newest posted Sunday, 1 March 2009, at 1:55 p.m.
• Is there some magic in Stanley 923 braces? -- Bill Houghton, Sebastopol, CA -- Sunday, 1 March 2009, at 3:23 p.m.
  5 messages -- Newest posted Monday, 2 March 2009, at 12:45 p.m.
• Plane Rehab Question -- Tom MacGregor -- Sunday, 1 March 2009, at 5:22 p.m.
  6 messages -- Newest posted Tuesday, 3 March 2009, at 2:54 p.m.
• greenlee draw knife -- -e- -- Sunday, 1 March 2009, at 5:51 p.m.
  8 messages -- Newest posted Wednesday, 4 March 2009, at 8:51 a.m.
• Samurai sword -- John Hoffman -- Sunday, 1 March 2009, at 6:06 p.m.
  13 messages -- Newest posted Monday, 2 March 2009, at 4:48 p.m.
• Spirit Level Question -- Stephen Shepherd in the State of Deseret -- Sunday, 1 March 2009, at 6:34 p.m.
  1 message
• Japanese Hammer *PIC* -- PaulV -- Sunday, 1 March 2009, at 7:01 p.m.
  10 messages -- Newest posted Thursday, 5 March 2009, at 9:50 p.m.
• Looking for A&C or Mission "box" plans -- Joe McMahon -- Sunday, 1 March 2009, at 8:55 p.m.
  4 messages -- Newest posted Tuesday, 3 March 2009, at 10:00 p.m.
• wood threader -- john lucas -- Monday, 2 March 2009, at 9:58 a.m.
  13 messages -- Newest posted Wednesday, 4 March 2009, at 3:44 a.m.
• Get-Together at My Shop, March 14th -- Mike Fitterling -- Monday, 2 March 2009, at 12:38 p.m.
  1 message
• how to taper a blind hole -- Bill Tindall, E.TN -- Monday, 2 March 2009, at 12:42 p.m.
  22 messages -- Newest posted Wednesday, 4 March 2009, at 6:44 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 3 March 2009, at 7:30 a.m.
  1 message
• From : Stanley . . . -- steve mackay -- Tuesday, 3 March 2009, at 4:52 p.m.
  6 messages -- Newest posted Wednesday, 4 March 2009, at 12:33 p.m.
• Help with troubleshooting wooden coffin smoother -- Dominic in Buck's County PA -- Tuesday, 3 March 2009, at 9:22 p.m.
  14 messages -- Newest posted Friday, 6 March 2009, at 9:30 p.m.
• Workbench project back on track - pics -- wilbur -- Tuesday, 3 March 2009, at 10:51 p.m.
  4 messages -- Newest posted Sunday, 8 March 2009, at 3:36 p.m.
• Old Stanley #3 on benefit auction *PIC* -- James Watriss -- Tuesday, 3 March 2009, at 11:20 p.m.
  16 messages -- Newest posted Sunday, 8 March 2009, at 10:07 a.m.
• Looking for a beat up, possibly broken #8 plane -- James Watriss -- Wednesday, 4 March 2009, at 12:08 a.m.
  20 messages -- Newest posted Saturday, 7 March 2009, at 8:25 p.m.
• Is Paul Hamler still in the tool making business? -- Scott in Montana -- Wednesday, 4 March 2009, at 10:42 a.m.
  10 messages -- Newest posted Thursday, 5 March 2009, at 1:33 p.m.
• Plane Rehab Complete *PIC* -- Tom MacGregor -- Wednesday, 4 March 2009, at 5:26 p.m.
  7 messages -- Newest posted Thursday, 5 March 2009, at 11:49 a.m.
• hand saw -- david schaefer fairbanks ak -- Thursday, 5 March 2009, at 12:02 a.m.
  13 messages -- Newest posted Thursday, 5 March 2009, at 11:35 p.m.
• Lateral Adjustment Lever -- Dean B -- Thursday, 5 March 2009, at 1:07 p.m.
  3 messages -- Newest posted Thursday, 5 March 2009, at 9:06 p.m.
• Vietnam - mahine content -- ThomD -- Thursday, 5 March 2009, at 1:46 p.m.
  9 messages -- Newest posted Friday, 6 March 2009, at 5:41 p.m.
• Article on making a new wedge for a woodie? -- Dominic in Buck's County PA -- Saturday, 7 March 2009, at 3:40 p.m.
  7 messages -- Newest posted Sunday, 8 March 2009, at 7:53 p.m.
• Wenzloff saw auction closes at 3am ET -- Ellis Walentine, Host -- Saturday, 7 March 2009, at 4:07 p.m.
  4 messages -- Newest posted Saturday, 7 March 2009, at 10:19 p.m.
• Hmmmmmm -- Jim Shaver - Oakville, Ont -- Saturday, 7 March 2009, at 5:37 p.m.
  23 messages -- Newest posted Tuesday, 10 March 2009, at 10:27 p.m.
• Estate Sale in Benicia, CA - lots of handtools -- -e- -- Sunday, 8 March 2009, at 3:10 p.m.
  3 messages -- Newest posted Monday, 9 March 2009, at 9:02 p.m.
• question on making new handle *PIC* -- -e- -- Sunday, 8 March 2009, at 8:42 p.m.
  23 messages -- Newest posted Wednesday, 25 March 2009, at 5:04 a.m.
• Just bought a Stanley 45 it is neet -- Wayne -- Monday, 9 March 2009, at 2:10 p.m.
  5 messages -- Newest posted Tuesday, 10 March 2009, at 8:19 a.m.
• What should I do? I have to burn up some vacation. -- Roy Anderson -- Monday, 9 March 2009, at 8:46 p.m.
  7 messages -- Newest posted Tuesday, 10 March 2009, at 7:19 p.m.
• Some burnishers I just made -- Dominic in Buck's County PA -- Monday, 9 March 2009, at 10:30 p.m.
  9 messages -- Newest posted Wednesday, 11 March 2009, at 3:20 a.m.
• Who sharpens saws well? -- Joe Shelton -- Tuesday, 10 March 2009, at 9:08 a.m.
  61 messages -- Newest posted Friday, 13 March 2009, at 2:38 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 10 March 2009, at 10:09 a.m.
  2 messages -- Newest posted Tuesday, 10 March 2009, at 10:31 p.m.
• I made this saw for a friend... *LINK* *PIC* -- Alan DuBoff -- Tuesday, 10 March 2009, at 6:36 p.m.
  12 messages -- Newest posted Saturday, 14 March 2009, at 9:53 p.m.
• Winchester Made Metal Handplanes -- charlie belden -- Tuesday, 10 March 2009, at 9:07 p.m.
  9 messages -- Newest posted Thursday, 12 March 2009, at 8:58 a.m.
• Thanks but I want more! How to burn up my vacation -- Roy Anderson -- Tuesday, 10 March 2009, at 9:47 p.m.
  15 messages -- Newest posted Sunday, 15 March 2009, at 9:28 a.m.
• Survey winner! *PIC* -- Ellis Walentine, Host -- Wednesday, 11 March 2009, at 8:23 a.m.
  5 messages -- Newest posted Wednesday, 11 March 2009, at 1:56 p.m.
• Flattening Veneers -- Sgian Dubh -- Wednesday, 11 March 2009, at 7:41 p.m.
  6 messages -- Newest posted Thursday, 12 March 2009, at 4:17 p.m.
• Old vs. New Saw -- David Brown------WebKitFormBoundary8hK4rUu9u+yJA72 -- Wednesday, 11 March 2009, at 9:51 p.m.
  37 messages -- Newest posted Saturday, 14 March 2009, at 9:57 p.m.
• Plywood expansion -- David Miller from Iowa -- Thursday, 12 March 2009, at 7:34 a.m.
  4 messages -- Newest posted Thursday, 12 March 2009, at 1:48 p.m.
• Saw sharpening info -- paul womack -- Thursday, 12 March 2009, at 12:24 p.m.
  46 messages -- Newest posted Tuesday, 24 March 2009, at 6:04 p.m.
• Recycled Saw from Marv - Wonderful -- David Cockey -- Thursday, 12 March 2009, at 9:48 p.m.
  7 messages -- Newest posted Sunday, 15 March 2009, at 9:59 p.m.
• chisel -- N orm -- Thursday, 12 March 2009, at 10:29 p.m.
  29 messages -- Newest posted Monday, 16 March 2009, at 12:42 a.m.
• Abrasive Comparison Chart *LINK* -- Tom MacGregor -- Friday, 13 March 2009, at 6:03 a.m.
  3 messages -- Newest posted Friday, 13 March 2009, at 9:00 a.m.
• Squaring up plane irons -- Dale Lenz -- Friday, 13 March 2009, at 5:59 p.m.
  13 messages -- Newest posted Sunday, 15 March 2009, at 10:08 p.m.
• Japanese chisel question -- Bill Houghton, Sebastopol, CA -- Friday, 13 March 2009, at 6:00 p.m.
  9 messages -- Newest posted Saturday, 14 March 2009, at 7:10 p.m.
• Laminate Springack Calcs Article -- Sgian Dubh -- Friday, 13 March 2009, at 6:35 p.m.
  1 message
• Homemade Marking and Cutting Gauges -- L. Hanson -- Friday, 13 March 2009, at 11:05 p.m.
  12 messages -- Newest posted Tuesday, 17 March 2009, at 8:57 p.m.
• A Mike W Delivery!!!!! -- Brent Smith, Montreal -- Saturday, 14 March 2009, at 10:07 a.m.
  8 messages -- Newest posted Sunday, 15 March 2009, at 3:59 p.m.
• Two off topic items for the price of one -- Bill Houghton, Sebastopol, CA -- Saturday, 14 March 2009, at 6:16 p.m.
  7 messages -- Newest posted Monday, 16 March 2009, at 11:53 p.m.
• Rob Cosman's "Training the Hand Seminar" -- Jim Barrett -- Saturday, 14 March 2009, at 9:55 p.m.
  1 message
• Hand Tool Work!!! *LINK* -- Brent Smith, Montreal -- Sunday, 15 March 2009, at 5:11 p.m.
  19 messages -- Newest posted Wednesday, 18 March 2009, at 3:38 p.m.
• Coffin smoother wedge rebuild update -- Dominic in Buck's County PA -- Sunday, 15 March 2009, at 9:52 p.m.
  7 messages -- Newest posted Tuesday, 17 March 2009, at 8:53 p.m.
• Bevel up or down Smoother -- Wayne -- Monday, 16 March 2009, at 10:32 a.m.
  11 messages -- Newest posted Monday, 23 March 2009, at 1:16 a.m.
• I have a type one LN, Neener, Neener -- Neal in San Jose -- Monday, 16 March 2009, at 1:08 p.m.
  8 messages -- Newest posted Tuesday, 17 March 2009, at 10:33 p.m.
• Are these worth anything??? *PIC* -- RC -- Monday, 16 March 2009, at 2:32 p.m.
  8 messages -- Newest posted Tuesday, 17 March 2009, at 9:17 p.m.
• Sweatshirt auctions ending tonight -- Ellis Walentine -- Monday, 16 March 2009, at 4:40 p.m.
  1 message
• making winding sticks *PIC* -- McKay -- Monday, 16 March 2009, at 5:16 p.m.
  3 messages -- Newest posted Tuesday, 17 March 2009, at 9:56 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 17 March 2009, at 9:29 a.m.
  1 message
• Need help veneering -- Joe McMahon -- Tuesday, 17 March 2009, at 5:43 p.m.
  2 messages -- Newest posted Tuesday, 17 March 2009, at 8:27 p.m.
• Cutting BIG workbench legs to length... -- wilbur -- Tuesday, 17 March 2009, at 7:42 p.m.
  32 messages -- Newest posted Tuesday, 24 March 2009, at 5:45 a.m.
• Am I crazy? I want to sell me table saw -- David Brown -- Thursday, 19 March 2009, at 12:47 a.m.
  18 messages -- Newest posted Sunday, 22 March 2009, at 5:58 p.m.
• hand tool video -- chichi1golf -- Thursday, 19 March 2009, at 12:55 a.m.
  3 messages -- Newest posted Thursday, 19 March 2009, at 3:39 p.m.
• First Shaving, XSNo.4 -- Jim Shaver - Oakville, Ont -- Thursday, 19 March 2009, at 9:01 a.m.
  6 messages -- Newest posted Thursday, 19 March 2009, at 8:35 p.m.
• Saw stuff revisited *LINK* -- Dan Donaldson -- Thursday, 19 March 2009, at 10:44 a.m.
  4 messages -- Newest posted Sunday, 22 March 2009, at 1:06 p.m.
• How many tails? -- Patrick Gibbons, Katy, TX -- Thursday, 19 March 2009, at 5:23 p.m.
  28 messages -- Newest posted Wednesday, 25 March 2009, at 7:26 a.m.
• How would you apply 8/4 molding? -- Patrick Gibbons, Katy, TX -- Thursday, 19 March 2009, at 5:27 p.m.
  3 messages -- Newest posted Friday, 20 March 2009, at 4:12 p.m.
• Interesting siding *PIC* -- Jack Guzman from Maine -- Friday, 20 March 2009, at 8:38 a.m.
  4 messages -- Newest posted Friday, 20 March 2009, at 8:25 p.m.
• Reminder.. #3 plane closes on Sunday -- James Watriss -- Friday, 20 March 2009, at 9:49 a.m.
  1 message
• What A Find! *LINK* *PIC* -- Bob Henderson -- Friday, 20 March 2009, at 12:26 p.m.
  11 messages -- Newest posted Tuesday, 24 March 2009, at 12:26 a.m.
• Crosscut Saw? -- Tony - Memphis -- Friday, 20 March 2009, at 2:32 p.m.
  12 messages -- Newest posted Monday, 23 March 2009, at 11:14 a.m.
• [AD] Take a Survey -- Win a Router! *LINK* -- Ellis Walentine, Host -- Friday, 20 March 2009, at 3:51 p.m.
  4 messages -- Newest posted Friday, 20 March 2009, at 7:06 p.m.
• Oddball machine screw size -- Bill Houghton, Sebastopol, CA -- Friday, 20 March 2009, at 11:34 p.m.
  10 messages -- Newest posted Thursday, 26 March 2009, at 7:01 p.m.
• Saw Till *PIC* -- David Miller from Iowa -- Saturday, 21 March 2009, at 8:33 a.m.
  7 messages -- Newest posted Tuesday, 24 March 2009, at 11:54 a.m.
• tapering a blind hole for a leg tenon *PIC* -- Bill Tindall, E.TN -- Saturday, 21 March 2009, at 10:11 a.m.
  13 messages -- Newest posted Monday, 23 March 2009, at 11:51 a.m.
• From 151 to travisher. . . *LINK* -- Dave Mount, snowing and blowing in NE MN -- Saturday, 21 March 2009, at 11:19 p.m.
  5 messages -- Newest posted Thursday, 26 March 2009, at 9:20 p.m.
• Today is the last day for the SW #3 *PIC* -- James Watriss -- Sunday, 22 March 2009, at 10:15 a.m.
  1 message
• Carving Chisel Recommendations -- David -- Sunday, 22 March 2009, at 6:45 p.m.
  8 messages -- Newest posted Tuesday, 24 March 2009, at 10:34 p.m.
• [AD] Take a Survey -- Win a Router! -- Ellis Walentine, Host -- Sunday, 22 March 2009, at 7:03 p.m.
  1 message
• A cleaned up Type 11 Stanley No 4 1/2 -- Dominic in Buck's County PA -- Sunday, 22 March 2009, at 7:27 p.m.
  5 messages -- Newest posted Thursday, 26 March 2009, at 9:30 p.m.
• Anyone seen one like this? *PIC* -- Stuart Hough -- Monday, 23 March 2009, at 12:14 a.m.
  9 messages -- Newest posted Monday, 23 March 2009, at 11:58 p.m.
• Blurring The Lines - JointMaker Pro -- charlie belden -- Monday, 23 March 2009, at 12:37 a.m.
  17 messages -- Newest posted Thursday, 26 March 2009, at 9:51 p.m.
• Sigh.... -- James Watriss -- Monday, 23 March 2009, at 10:18 a.m.
  6 messages -- Newest posted Thursday, 26 March 2009, at 10:00 p.m.
• Stanley bench planes: does the frog design matter? *PIC* -- wilbur -- Monday, 23 March 2009, at 11:04 a.m.
  18 messages -- Newest posted Wednesday, 25 March 2009, at 11:59 p.m.
• Totally OT *LINK* -- Dan Donaldson -- Tuesday, 24 March 2009, at 8:25 a.m.
  6 messages -- Newest posted Tuesday, 24 March 2009, at 1:42 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 24 March 2009, at 9:16 a.m.
  1 message
• Tips on sharpening/tuning LV Cabinet Scraper -- Stephen Kirk in Quakertown PA -- Tuesday, 24 March 2009, at 1:31 p.m.
  3 messages -- Newest posted Tuesday, 24 March 2009, at 7:55 p.m.
• OT - used my circumference rule yesterday -- Bill Houghton, Sebastopol, CA -- Tuesday, 24 March 2009, at 5:59 p.m.
  6 messages -- Newest posted Wednesday, 25 March 2009, at 1:39 p.m.
• Hand Tools For Afghanistan -- charlie belden -- Wednesday, 25 March 2009, at 3:16 p.m.
  17 messages -- Newest posted Friday, 1 May 2009, at 7:27 p.m.
• Gramercy Holdfast -- David Brown -- Thursday, 26 March 2009, at 12:38 a.m.
  7 messages -- Newest posted Saturday, 28 March 2009, at 12:11 a.m.
• Hand Drills -- David Brown -- Thursday, 26 March 2009, at 12:41 a.m.
  47 messages -- Newest posted Tuesday, 31 March 2009, at 7:43 p.m.
• Way-y-y OT--What happened to pattern-making *LINK* -- Wiley Horne--So. Calif. -- Thursday, 26 March 2009, at 1:07 a.m.
  16 messages -- Newest posted Saturday, 28 March 2009, at 4:54 a.m.
• Specialty Plane Question *LINK* -- David Brown -- Friday, 27 March 2009, at 10:24 p.m.
  41 messages -- Newest posted Monday, 30 March 2009, at 4:29 p.m.
• Disston Black Diamond saw -- Bill Houghton, Sebastopol, CA -- Saturday, 28 March 2009, at 3:25 p.m.
  6 messages -- Newest posted Sunday, 29 March 2009, at 11:32 a.m.
• Mayo jar getting fulll gain -- Edward in Vancouver -- Saturday, 28 March 2009, at 11:54 p.m.
  12 messages -- Newest posted Tuesday, 31 March 2009, at 9:40 a.m.
• Update on Brace/Driver/Toolbox *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 29 March 2009, at 10:32 a.m.
  7 messages -- Newest posted Tuesday, 31 March 2009, at 11:06 a.m.
• Weight of brass for plane hammer? -- Dominic in Buck's County PA -- Sunday, 29 March 2009, at 5:06 p.m.
  17 messages -- Newest posted Tuesday, 31 March 2009, at 8:51 p.m.
• More amazing David Brookshaw *LINK* -- Marv....... Northern California Lake Co. -- Sunday, 29 March 2009, at 7:40 p.m.
  2 messages -- Newest posted Wednesday, 1 April 2009, at 12:36 a.m.
• Milk paint question -- Dave Mount, another snowstorm coming -- Monday, 30 March 2009, at 12:53 a.m.
  20 messages -- Newest posted Wednesday, 1 April 2009, at 12:57 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 31 March 2009, at 8:49 a.m.
  1 message
• Happy Birthday Mr. Shaver!! -- Denis Chénard, Orléans, Ont. -- Tuesday, 31 March 2009, at 9:53 a.m.
  7 messages -- Newest posted Wednesday, 1 April 2009, at 3:45 p.m.
• Looking in Philly -- Mike Jurnigan in Suffolk, VA -- Tuesday, 31 March 2009, at 6:36 p.m.
  7 messages -- Newest posted Wednesday, 1 April 2009, at 4:14 p.m.
• Just made New Hand plane *PIC* -- Wayne Carson -- Tuesday, 31 March 2009, at 9:47 p.m.
  6 messages -- Newest posted Wednesday, 1 April 2009, at 8:30 p.m.
• Rebate shave? -- Wiley Horne--So. Calif. -- Tuesday, 31 March 2009, at 10:10 p.m.
  22 messages -- Newest posted Saturday, 4 April 2009, at 2:27 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Wednesday, 1 April 2009, at 7:31 a.m.
  1 message
• New Saw -- Brent Smith, Montreal -- Wednesday, 1 April 2009, at 8:56 a.m.
  36 messages -- Newest posted Thursday, 2 April 2009, at 9:55 p.m.
• Mortise chopping: from the middle out, or -- wilbur -- Wednesday, 1 April 2009, at 1:29 p.m.
  12 messages -- Newest posted Saturday, 4 April 2009, at 1:49 p.m.
• NEW Shop Shots - #901 - #904 -- David Yoho -- Wednesday, 1 April 2009, at 6:03 p.m.
  3 messages -- Newest posted Saturday, 4 April 2009, at 9:08 a.m.
• OT - lost skills -- Bill Houghton, Sebastopol, CA -- Wednesday, 1 April 2009, at 10:10 p.m.
  37 messages -- Newest posted Friday, 3 April 2009, at 6:36 p.m.
• Question about English stanley 4 1/2 -- Stuart Hough -- Wednesday, 1 April 2009, at 11:52 p.m.
  6 messages -- Newest posted Thursday, 2 April 2009, at 9:02 p.m.
• Sharpening carving tools? -- Joe Pack -- Thursday, 2 April 2009, at 12:20 a.m.
  6 messages -- Newest posted Friday, 3 April 2009, at 1:32 p.m.
• Interesting Web Site -- Ray Binnicker -- Thursday, 2 April 2009, at 8:10 p.m.
  4 messages -- Newest posted Friday, 3 April 2009, at 1:21 p.m.
• classified: Disston No. 240 Metal Cutting *PIC* -- studio e artworks -- Thursday, 2 April 2009, at 9:27 p.m.
  1 message
• OT - camp stove fuel as solvent -- Bill Houghton, Sebastopol, CA -- Friday, 3 April 2009, at 2:23 p.m.
  17 messages -- Newest posted Sunday, 5 April 2009, at 4:45 p.m.
• A refurbed Type 4 Bedrock 607 -- Dominic in Buck's County PA -- Friday, 3 April 2009, at 8:24 p.m.
  6 messages -- Newest posted Tuesday, 7 April 2009, at 8:51 p.m.
• O.T. Does anyone know... -- Stephen Shepherd in the State of Deseret -- Friday, 3 April 2009, at 8:24 p.m.
  6 messages -- Newest posted Sunday, 5 April 2009, at 8:55 p.m.
• Medallion Toolworks #9 -- Tony Sade (Charleston, WV) -- Friday, 3 April 2009, at 8:45 p.m.
  11 messages -- Newest posted Tuesday, 7 April 2009, at 9:41 p.m.
• Making big mortises for my workbench -- wilbur -- Saturday, 4 April 2009, at 10:25 a.m.
  18 messages -- Newest posted Tuesday, 14 April 2009, at 8:37 a.m.
• New item on the Benefit Auction Page *NM* *LINK* -- Andy Lincoln,in Dearborn,MI -- Saturday, 4 April 2009, at 2:42 p.m.
  1 message
• Lee Valley / Veritas Business Plan -- charlie belden -- Saturday, 4 April 2009, at 3:54 p.m.
  5 messages -- Newest posted Saturday, 4 April 2009, at 11:52 p.m.
• storing liquid hide glue -- Bill Tindall, E.TN -- Sunday, 5 April 2009, at 8:53 a.m.
  7 messages -- Newest posted Monday, 6 April 2009, at 12:42 a.m.
• Dovetailed Box *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 5 April 2009, at 9:10 a.m.
  2 messages -- Newest posted Sunday, 5 April 2009, at 11:11 a.m.
• Workbench advice needed. Chris Schwarz? -- Stuart Hough -- Sunday, 5 April 2009, at 1:06 p.m.
  8 messages -- Newest posted Sunday, 5 April 2009, at 9:21 p.m.
• Small router plane question -- Bill Houghton, Sebastopol, CA -- Sunday, 5 April 2009, at 1:24 p.m.
  4 messages -- Newest posted Monday, 6 April 2009, at 4:30 p.m.
• unknown cast iron plane *PIC* -- Robin Corell in Atascadero CA -- Sunday, 5 April 2009, at 2:28 p.m.
  5 messages -- Newest posted Monday, 6 April 2009, at 1:56 a.m.
• Pins first advice -- Jack Guzman from Maine -- Monday, 6 April 2009, at 7:23 a.m.
  6 messages -- Newest posted Tuesday, 7 April 2009, at 6:25 a.m.
• NEW Shop Shots - #905 - #906 -- David Yoho -- Monday, 6 April 2009, at 10:14 a.m.
  1 message
• Making a wooden hinge *PIC* -- Derek Cohen (in Perth, Australia) -- Monday, 6 April 2009, at 1:31 p.m.
  22 messages -- Newest posted Wednesday, 15 April 2009, at 10:41 p.m.
• Disston squares *PIC* -- Bill Houghton, Sebastopol, CA -- Monday, 6 April 2009, at 1:39 p.m.
  4 messages -- Newest posted Tuesday, 7 April 2009, at 11:49 a.m.
• Question about backsaw backs? -- Marv....... Northern California Lake Co. -- Monday, 6 April 2009, at 2:09 p.m.
  20 messages -- Newest posted Tuesday, 7 April 2009, at 3:55 p.m.
• CRAFTS Auction April 18th -- Jay Samuels -- Monday, 6 April 2009, at 6:08 p.m.
  1 message
• Record Vise question -- Bill Tindall, E.TN -- Monday, 6 April 2009, at 10:13 p.m.
  5 messages -- Newest posted Tuesday, 7 April 2009, at 6:06 p.m.
• saw id help -- Jerome Bias -- Monday, 6 April 2009, at 10:28 p.m.
  3 messages -- Newest posted Tuesday, 7 April 2009, at 9:16 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 7 April 2009, at 7:54 a.m.
  1 message
• How was this made? *PIC* -- Bill Tindall, E.TN -- Tuesday, 7 April 2009, at 9:09 a.m.
  12 messages -- Newest posted Wednesday, 8 April 2009, at 10:18 a.m.
• A mighty nice broadax -- Ellis Walentine, Host -- Tuesday, 7 April 2009, at 10:11 a.m.
  15 messages -- Newest posted Sunday, 12 April 2009, at 8:49 p.m.
• Did a survey for Fine Woodworking today -- Bill Houghton, Sebastopol, CA -- Tuesday, 7 April 2009, at 4:11 p.m.
  7 messages -- Newest posted Wednesday, 8 April 2009, at 2:06 p.m.
• OT - reinforcing concrete -- Bill Houghton, Sebastopol, CA -- Wednesday, 8 April 2009, at 11:08 p.m.
  9 messages -- Newest posted Monday, 13 April 2009, at 3:40 p.m.
• "Art Project" Table *PIC* -- Bill Tindall, E.TN -- Thursday, 9 April 2009, at 2:11 p.m.
  10 messages -- Newest posted Friday, 10 April 2009, at 2:13 p.m.
• Another saw till *LINK* *PIC* -- Bill Houghton, Sebastopol, CA -- Thursday, 9 April 2009, at 5:37 p.m.
  10 messages -- Newest posted Monday, 13 April 2009, at 10:44 p.m.
• Clip for Clipboard - ideas? -- Derek Cohen (in Perth, Australia) -- Friday, 10 April 2009, at 1:28 p.m.
  6 messages -- Newest posted Friday, 10 April 2009, at 8:01 p.m.
• LV Scraper plane on the street *LINK* -- Bill Houghton, Sebastopol, CA -- Friday, 10 April 2009, at 9:49 p.m.
  2 messages -- Newest posted Saturday, 11 April 2009, at 2:01 a.m.
• Stanley No. 60 mouth adjuster lever thingie -- Bill Houghton, Sebastopol, CA -- Saturday, 11 April 2009, at 3:18 p.m.
  7 messages -- Newest posted Monday, 13 April 2009, at 7:43 p.m.
• Bedrock 608C Refurb -- Dominic in Buck's County PA -- Saturday, 11 April 2009, at 10:01 p.m.
  11 messages -- Newest posted Monday, 13 April 2009, at 10:26 a.m.
• Happy Easter everyone *PIC* -- Bob Demers -- Sunday, 12 April 2009, at 9:25 a.m.
  2 messages -- Newest posted Sunday, 12 April 2009, at 1:32 p.m.
• A little more of the woodshop rebuilt. *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 12 April 2009, at 9:37 a.m.
  7 messages -- Newest posted Monday, 13 April 2009, at 10:42 p.m.
• OT-Went to an auction, ended-up in the paper *LINK* -- cooper suter -- Sunday, 12 April 2009, at 10:28 p.m.
  7 messages -- Newest posted Tuesday, 14 April 2009, at 10:41 p.m.
• A more functional table *LINK* -- Bill Tindall, E.TN -- Sunday, 12 April 2009, at 10:36 p.m.
  2 messages -- Newest posted Monday, 13 April 2009, at 3:58 a.m.
• I was in LeeValley TODAY....! EYE-REPORT....! *LINK* -- HC Sakman --- Victoria,BC. CANADA -- Sunday, 12 April 2009, at 10:54 p.m.
  1 message
• The Galoots Way *PIC* -- Derek Cohen (in Perth, Australia) -- Monday, 13 April 2009, at 9:47 a.m.
  13 messages -- Newest posted Wednesday, 15 April 2009, at 11:36 p.m.
• Now I remember why I chose the LV small router -- Bill Houghton, Sebastopol, CA -- Monday, 13 April 2009, at 1:46 p.m.
  9 messages -- Newest posted Wednesday, 15 April 2009, at 11:26 p.m.
• For what is this? *PIC* -- David Miller from Iowa -- Monday, 13 April 2009, at 7:03 p.m.
  7 messages -- Newest posted Thursday, 16 April 2009, at 6:21 p.m.
• Busy little devils, those Lee Valley elves *LINK* -- Bill Houghton, Sebastopol, CA -- Monday, 13 April 2009, at 9:58 p.m.
  7 messages -- Newest posted Thursday, 16 April 2009, at 1:47 p.m.
• NEW Shop Shots - #907 - #908 -- David Yoho -- Tuesday, 14 April 2009, at 7:51 a.m.
  5 messages -- Newest posted Wednesday, 15 April 2009, at 11:18 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 14 April 2009, at 9:10 a.m.
  1 message
• Fray chuck vs. shell chuck -- Bill Houghton, Sebastopol, CA -- Tuesday, 14 April 2009, at 3:22 p.m.
  5 messages -- Newest posted Saturday, 18 April 2009, at 9:43 p.m.
• Book on Benefits Auction *LINK* -- Bill Houghton, Sebastopol, CA -- Tuesday, 14 April 2009, at 6:17 p.m.
  1 message
• Haa It Comes To This? -- charlie belden -- Tuesday, 14 April 2009, at 8:33 p.m.
  8 messages -- Newest posted Wednesday, 15 April 2009, at 7:12 p.m.
• Use of Snipe Bill -- Ed DeLauter -- Wednesday, 15 April 2009, at 9:07 a.m.
  18 messages -- Newest posted Monday, 20 April 2009, at 8:56 a.m.
• Hey! Nice hat Mr. Weber! -- Dan Moening -- Wednesday, 15 April 2009, at 11:29 a.m.
  2 messages -- Newest posted Wednesday, 15 April 2009, at 1:11 p.m.
• thumbhole disston for lefties? -- Bill Houghton, Sebastopol, CA -- Wednesday, 15 April 2009, at 1:53 p.m.
  2 messages -- Newest posted Wednesday, 15 April 2009, at 3:09 p.m.
• Those LeeValley Elves are busier than u think!PIX! -- HC Sakman --- Victoria,BC. CANADA -- Wednesday, 15 April 2009, at 1:56 p.m.
  2 messages -- Newest posted Wednesday, 15 April 2009, at 3:26 p.m.
• Stanley threads one more time... -- Tom MacGregor -- Wednesday, 15 April 2009, at 3:17 p.m.
  1 message
• *** Survey Drawing Winner! *** -- Ellis Walentine, Host -- Wednesday, 15 April 2009, at 3:21 p.m.
  1 message
• Busy LVLs -- ThomD -- Thursday, 16 April 2009, at 12:13 a.m.
  4 messages -- Newest posted Thursday, 16 April 2009, at 8:30 p.m.
• Roy's new school -- ThomD -- Thursday, 16 April 2009, at 12:22 a.m.
  4 messages -- Newest posted Thursday, 16 April 2009, at 5:37 p.m.
• Shooting Board query -- roninkokomo -- Thursday, 16 April 2009, at 9:47 a.m.
  9 messages -- Newest posted Monday, 20 April 2009, at 8:49 a.m.
• Nm *NM* -- Ron Bauman -- Thursday, 16 April 2009, at 7:38 p.m.
  7 messages -- Newest posted Saturday, 18 April 2009, at 10:07 p.m.
• A cleaned up Stanley Type 19 No 4 1/2 -- Dominic in Buck's County PA -- Thursday, 16 April 2009, at 8:33 p.m.
  9 messages -- Newest posted Sunday, 19 April 2009, at 1:17 a.m.
• Breaking the boredom *PIC* -- David Miller from Iowa -- Friday, 17 April 2009, at 9:45 p.m.
  5 messages -- Newest posted Monday, 20 April 2009, at 5:39 a.m.
• Historical tidbit -- Bill Houghton, Sebastopol, CA -- Friday, 17 April 2009, at 10:55 p.m.
  9 messages -- Newest posted Sunday, 19 April 2009, at 2:29 p.m.
• Question about traditional practice -- Wiley Horne--So. Calif. -- Saturday, 18 April 2009, at 1:54 a.m.
  7 messages -- Newest posted Saturday, 18 April 2009, at 9:07 p.m.
• Auger Bit Question -- David Brown -- Saturday, 18 April 2009, at 10:49 a.m.
  3 messages -- Newest posted Saturday, 18 April 2009, at 3:15 p.m.
• Need some help to find a hinge for a friend *PIC* -- Michael Stadulis in Southern NJ -- Saturday, 18 April 2009, at 3:55 p.m.
  3 messages -- Newest posted Sunday, 19 April 2009, at 12:45 a.m.
• What to do/see in Houston? -- Ron in Sterling, CT -- Saturday, 18 April 2009, at 4:55 p.m.
  10 messages -- Newest posted Sunday, 26 April 2009, at 9:52 p.m.
• What to see in Philly -- David Miller from Iowa -- Sunday, 19 April 2009, at 9:25 a.m.
  7 messages -- Newest posted Monday, 20 April 2009, at 12:09 p.m.
• Letter Knife Mk 2 *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 19 April 2009, at 10:56 a.m.
  15 messages -- Newest posted Wednesday, 22 April 2009, at 9:29 p.m.
• eBay protocol - postage -- Bill Houghton, Sebastopol, CA -- Sunday, 19 April 2009, at 7:14 p.m.
  29 messages -- Newest posted Sunday, 26 April 2009, at 11:34 p.m.
• Wooden screw in leg vise -- wilbur -- Sunday, 19 April 2009, at 11:00 p.m.
  18 messages -- Newest posted Wednesday, 22 April 2009, at 10:08 p.m.
• Starrett Repair? -- Tony - Memphis -- Monday, 20 April 2009, at 11:10 a.m.
  19 messages -- Newest posted Thursday, 23 April 2009, at 12:50 p.m.
• OT - Mac Word problem -- Bill Houghton, Sebastopol, CA -- Monday, 20 April 2009, at 5:02 p.m.
  6 messages -- Newest posted Tuesday, 21 April 2009, at 6:51 p.m.
• OT--economic depression on Ebay? -- Wiley Horne--So. Calif. -- Monday, 20 April 2009, at 5:41 p.m.
  13 messages -- Newest posted Wednesday, 22 April 2009, at 10:58 p.m.
• Millers Falls Drill No. 5 help -- Clementine -- Monday, 20 April 2009, at 8:18 p.m.
  11 messages -- Newest posted Thursday, 23 April 2009, at 9:19 p.m.
• Disappointed in Japan woodworker -- James Watriss -- Monday, 20 April 2009, at 11:09 p.m.
  48 messages -- Newest posted Sunday, 26 April 2009, at 11:18 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 21 April 2009, at 7:36 a.m.
  1 message
• Benefit auction deadline *LINK* -- Bill Houghton, Sebastopol, CA -- Tuesday, 21 April 2009, at 12:03 p.m.
  2 messages -- Newest posted Tuesday, 21 April 2009, at 12:04 p.m.
• Here's a specialized production carpenter item *LINK* -- Bill Houghton, Sebastopol, CA -- Tuesday, 21 April 2009, at 6:22 p.m.
  2 messages -- Newest posted Tuesday, 21 April 2009, at 7:50 p.m.
• LV Small Scrper Plane in action -- Dominic in Buck's County PA -- Tuesday, 21 April 2009, at 6:58 p.m.
  3 messages -- Newest posted Thursday, 23 April 2009, at 9:33 p.m.
• Happy Earth Day *NM* *PIC* -- Greg Bétit, Vergennes VT -- Wednesday, 22 April 2009, at 6:26 a.m.
  22 messages -- Newest posted Friday, 24 April 2009, at 10:06 p.m.
• 4 Days left in Infill Plane Kit auction *LINK* -- Andy Lincoln,in Dearborn,MI -- Wednesday, 22 April 2009, at 1:37 p.m.
  5 messages -- Newest posted Saturday, 25 April 2009, at 3:58 p.m.
• Anvils *LINK* -- Hank Knight -- Wednesday, 22 April 2009, at 5:23 p.m.
  15 messages -- Newest posted Friday, 24 April 2009, at 12:55 a.m.
• ever heard of footprint tools? -- Roy Anderson -- Thursday, 23 April 2009, at 5:18 a.m.
  11 messages -- Newest posted Monday, 27 April 2009, at 8:40 a.m.
• just checking *PIC* -- David Miller from Iowa -- Friday, 24 April 2009, at 2:52 p.m.
  5 messages -- Newest posted Sunday, 26 April 2009, at 10:05 p.m.
• Shop Built Plane Hammer -- Dominic in Buck's County PA -- Friday, 24 April 2009, at 9:09 p.m.
  3 messages -- Newest posted Saturday, 25 April 2009, at 4:08 p.m.
• "Donar body" for a scrub plane? -- Edward in Vancouver -- Friday, 24 April 2009, at 10:11 p.m.
  8 messages -- Newest posted Sunday, 26 April 2009, at 11:51 p.m.
• Shortcomings of Veritas Plow Plane -- Patrick Gibbons, Katy, TX -- Saturday, 25 April 2009, at 1:35 p.m.
  16 messages -- Newest posted Monday, 27 April 2009, at 2:29 p.m.
• WWKD -- David Brown -- Sunday, 26 April 2009, at 12:16 a.m.
  33 messages -- Newest posted Friday, 1 May 2009, at 9:39 a.m.
• The Unplaned plane -- David Brown -- Sunday, 26 April 2009, at 12:24 a.m.
  10 messages -- Newest posted Wednesday, 13 May 2009, at 9:07 p.m.
• OT Toyota trucks? -- ThomD -- Monday, 27 April 2009, at 3:14 p.m.
  10 messages -- Newest posted Saturday, 2 May 2009, at 1:40 p.m.
• Ryobi question -- roninkokomo -- Monday, 27 April 2009, at 3:37 p.m.
  13 messages -- Newest posted Wednesday, 29 April 2009, at 7:22 a.m.
• Files for infill work -- Ellis Walentine, Host -- Monday, 27 April 2009, at 4:34 p.m.
  16 messages -- Newest posted Friday, 1 May 2009, at 7:29 p.m.
• What Is it? Pic -- Jim Shaver - Oakville, Ont -- Monday, 27 April 2009, at 6:45 p.m.
  11 messages -- Newest posted Wednesday, 29 April 2009, at 10:40 p.m.
• New Tail Vises *LINK* -- David Cockey -- Monday, 27 April 2009, at 8:20 p.m.
  6 messages -- Newest posted Thursday, 30 April 2009, at 12:27 a.m.
• End of Woodwork -- David Cockey -- Monday, 27 April 2009, at 10:02 p.m.
  20 messages -- Newest posted Wednesday, 6 May 2009, at 8:43 a.m.
• House built by Carl Jennings - Metalsmith -- Alan DuBoff -- Tuesday, 28 April 2009, at 2:19 a.m.
  2 messages -- Newest posted Tuesday, 28 April 2009, at 12:06 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 28 April 2009, at 9:04 a.m.
  1 message
• Characteristics of Sitka spruce? -- Dave Mount -- Tuesday, 28 April 2009, at 11:44 a.m.
  18 messages -- Newest posted Saturday, 2 May 2009, at 1:18 a.m.
• 1921 school shop photo *LINK* -- Dick Coers -- Tuesday, 28 April 2009, at 3:02 p.m.
  11 messages -- Newest posted Friday, 1 May 2009, at 6:47 p.m.
• What fence is this? *PIC* -- David Miller from Iowa -- Wednesday, 29 April 2009, at 11:39 a.m.
  13 messages -- Newest posted Monday, 4 May 2009, at 6:50 a.m.
• Stopped Grooves -- David Brown -- Thursday, 30 April 2009, at 10:22 p.m.
  13 messages -- Newest posted Sunday, 3 May 2009, at 11:09 a.m.
• Alan Peters video -- Sgian Dubh -- Saturday, 2 May 2009, at 10:09 a.m.
  7 messages -- Newest posted Sunday, 3 May 2009, at 9:48 a.m.
• Woodfiller vs.... -- John L. Blue -- Sunday, 3 May 2009, at 12:30 a.m.
  24 messages -- Newest posted Thursday, 7 May 2009, at 10:24 a.m.
• Slightly OT - Safety issue in current FWW -- Bill Houghton, Sebastopol, CA -- Sunday, 3 May 2009, at 11:44 a.m.
  7 messages -- Newest posted Monday, 4 May 2009, at 2:39 p.m.
• 100 vs. 101 Jennings Auger Bits -- David Brown -- Sunday, 3 May 2009, at 2:22 p.m.
  7 messages -- Newest posted Thursday, 7 May 2009, at 9:58 p.m.
• Underhill's Woodwright School status -- Bert Bleckwenn -- Monday, 4 May 2009, at 12:30 p.m.
  7 messages -- Newest posted Monday, 25 May 2009, at 1:51 p.m.
• Vertitas Large Spokeshave? *LINK* -- JL -- Tuesday, 5 May 2009, at 5:13 a.m.
  21 messages -- Newest posted Thursday, 7 May 2009, at 9:51 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 5 May 2009, at 8:53 a.m.
  1 message
• Finish recommendations -- David Miller from Iowa -- Tuesday, 5 May 2009, at 11:48 a.m.
  17 messages -- Newest posted Thursday, 7 May 2009, at 9:46 p.m.
• AD: Hamler Scraper Plane Inserts -- Ellis Walentine -- Tuesday, 5 May 2009, at 1:12 p.m.
  1 message
• Safety Week -- Adam Cherubini, NJ -- Tuesday, 5 May 2009, at 10:56 p.m.
  40 messages -- Newest posted Saturday, 9 May 2009, at 9:20 a.m.
• Craftsmanship, a study *LINK* -- Wiley Horne--So. Calif. -- Wednesday, 6 May 2009, at 12:42 a.m.
  7 messages -- Newest posted Thursday, 7 May 2009, at 7:11 p.m.
• Stanley spoke shave vs. Hock blade -- Philip Duffy -- Wednesday, 6 May 2009, at 5:31 a.m.
  6 messages -- Newest posted Thursday, 7 May 2009, at 6:33 a.m.
• Weather resistance -- David Miller from Iowa -- Wednesday, 6 May 2009, at 6:27 p.m.
  14 messages -- Newest posted Saturday, 9 May 2009, at 1:14 p.m.
• Can someone explain to me... *LINK* -- Bill Houghton, Sebastopol, CA -- Wednesday, 6 May 2009, at 7:36 p.m.
  5 messages -- Newest posted Thursday, 7 May 2009, at 3:24 p.m.
• Choosing a Pull Saw? -- Tom MacGregoor -- Thursday, 7 May 2009, at 9:00 a.m.
  28 messages -- Newest posted Friday, 15 May 2009, at 6:49 p.m.
• A use for old woodturning chisels------WebKitFormB -- Roy Girolami------WebKitFormBoundary9yANUT8mn8C+Zo -- Thursday, 7 May 2009, at 7:06 p.m.
  2 messages -- Newest posted Sunday, 10 May 2009, at 7:38 p.m.
• DIY Stainless Steel Infill Kit *LINK* -- Craig D -- Friday, 8 May 2009, at 3:04 a.m.
  15 messages -- Newest posted Saturday, 23 May 2009, at 1:49 a.m.
• Thanking my dad -- Bill Houghton, Sebastopol, CA -- Friday, 8 May 2009, at 1:35 p.m.
  16 messages -- Newest posted Thursday, 14 May 2009, at 12:48 a.m.
• DIY infill: Fitting the sides *LINK* *PIC* -- Craig D -- Saturday, 9 May 2009, at 3:44 p.m.
  1 message
• A different perspective *LINK* -- Pam Niedermayer, Austin, TX -- Saturday, 9 May 2009, at 3:54 p.m.
  32 messages -- Newest posted Wednesday, 13 May 2009, at 9:02 p.m.
• Re: -- ThomD -- Sunday, 10 May 2009, at 3:58 a.m.
  2 messages -- Newest posted Sunday, 10 May 2009, at 5:29 a.m.
• Info for those that spray *PIC* -- Bill Tindall, E.TN -- Sunday, 10 May 2009, at 12:45 p.m.
  12 messages -- Newest posted Wednesday, 13 May 2009, at 9:09 p.m.
• Stanley 30 angle divider *LINK* -- Bill Houghton, Sebastopol, CA -- Sunday, 10 May 2009, at 10:33 p.m.
  4 messages -- Newest posted Saturday, 16 May 2009, at 6:58 p.m.
• Magazines on Benefits Auction closing Friday -- Bill Houghton, Sebastopol, CA -- Sunday, 10 May 2009, at 10:46 p.m.
  1 message
• Need advice on height of planer blades -- Charles R. Smith -- Monday, 11 May 2009, at 12:52 p.m.
  6 messages -- Newest posted Wednesday, 13 May 2009, at 9:14 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 12 May 2009, at 6:51 a.m.
  1 message
• Couple of odds and ends -- Wiley Horne--So. Calif. -- Wednesday, 13 May 2009, at 2:24 p.m.
  21 messages -- Newest posted Saturday, 16 May 2009, at 8:57 p.m.
• Parts needed for drills -- Joe McMahon -- Thursday, 14 May 2009, at 8:33 a.m.
  2 messages -- Newest posted Thursday, 14 May 2009, at 12:12 p.m.
• Protractor . . . *PIC* -- steve mackay -- Thursday, 14 May 2009, at 4:37 p.m.
  15 messages -- Newest posted Friday, 15 May 2009, at 6:20 p.m.
• Hand Tools vs Machines -- DaveK -- Friday, 15 May 2009, at 3:33 p.m.
  19 messages -- Newest posted Saturday, 23 May 2009, at 2:24 p.m.
• Stanley 80 Scraper Blade -- Wayne -- Friday, 15 May 2009, at 4:12 p.m.
  5 messages -- Newest posted Monday, 18 May 2009, at 2:51 p.m.
• Behlen's "Rock Hard Table Top Varnish." -- Craig Jahr -- Friday, 15 May 2009, at 8:29 p.m.
  10 messages -- Newest posted Monday, 18 May 2009, at 4:18 p.m.
• Excellent video of Japanese woodworker in action *LINK* -- wilbur -- Saturday, 16 May 2009, at 9:52 a.m.
  3 messages -- Newest posted Saturday, 16 May 2009, at 1:44 p.m.
• Followup to Wiley's iris experiment -- Bill Tindall, E.TN -- Saturday, 16 May 2009, at 7:53 p.m.
  4 messages -- Newest posted Sunday, 17 May 2009, at 3:36 p.m.
• frame saws in british immigrant invetories -- Jerome Bias -- Sunday, 17 May 2009, at 2:46 p.m.
  15 messages -- Newest posted Thursday, 21 May 2009, at 1:58 a.m.
• NEW Shop Shot - #909 -- David Yoho -- Monday, 18 May 2009, at 7:55 a.m.
  1 message
• cross cut sawing harwood planks *PIC* -- Bill Tindall, E.TN -- Monday, 18 May 2009, at 7:06 p.m.
  2 messages -- Newest posted Tuesday, 19 May 2009, at 12:43 p.m.
• Recently Discovered Neander Affliction *PIC* -- charlie belden -- Tuesday, 19 May 2009, at 12:27 a.m.
  4 messages -- Newest posted Thursday, 21 May 2009, at 12:00 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 19 May 2009, at 7:24 a.m.
  3 messages -- Newest posted Wednesday, 20 May 2009, at 9:51 p.m.
• New Japanese plane DVD *LINK* -- wilbur -- Tuesday, 19 May 2009, at 3:43 p.m.
  22 messages -- Newest posted Saturday, 23 May 2009, at 12:51 a.m.
• Sympathies for a friend -- Ellis Walentine -- Tuesday, 19 May 2009, at 6:57 p.m.
  3 messages -- Newest posted Thursday, 21 May 2009, at 12:14 a.m.
• A Plane Sole Question -- dave brown -- Thursday, 21 May 2009, at 11:03 p.m.
  26 messages -- Newest posted Tuesday, 26 May 2009, at 5:38 a.m.
• Sharpening Japanese Handsaws -- Mark Grable -- Thursday, 21 May 2009, at 11:22 p.m.
  12 messages -- Newest posted Wednesday, 3 June 2009, at 2:51 a.m.
• RIP Sam Maloof *LINK* -- Kenneth Martin Sacramento -- Saturday, 23 May 2009, at 1:26 a.m.
  6 messages -- Newest posted Tuesday, 26 May 2009, at 11:46 a.m.
• Accolades for Marv Werner -- Stuart Hough -- Saturday, 23 May 2009, at 10:56 a.m.
  1 message
• Dominy Bench Questions-long -- Patrick Gibbons, Katy, TX -- Saturday, 23 May 2009, at 12:57 p.m.
  15 messages -- Newest posted Tuesday, 26 May 2009, at 10:58 a.m.
• *** IDES OF MAY: Sam Maloof *** *PIC* -- Ellis Walentine -- Sunday, 24 May 2009, at 8:56 a.m.
  9 messages -- Newest posted Wednesday, 27 May 2009, at 1:18 a.m.
• Bowsaw Mark 1 -- Dominic in Buck's County PA -- Sunday, 24 May 2009, at 9:38 p.m.
  69 messages -- Newest posted Wednesday, 3 June 2009, at 8:52 a.m.
• It seems the new Stanley planes are almost out *LINK* -- Bill Houghton, Sebastopol, CA -- Monday, 25 May 2009, at 10:51 p.m.
  21 messages -- Newest posted Thursday, 28 May 2009, at 11:38 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 26 May 2009, at 7:29 a.m.
  1 message
• LV Knock off? *LINK* *PIC* -- Scott Burr in Ben Lomond, CA -- Tuesday, 26 May 2009, at 11:28 p.m.
  44 messages -- Newest posted Friday, 29 May 2009, at 4:29 p.m.
• Shooting board -- Guy -- Wednesday, 27 May 2009, at 11:21 a.m.
  5 messages -- Newest posted Sunday, 31 May 2009, at 9:20 a.m.
• Boris Karloff and wood!! *LINK* -- Mike Real in PGH -- Thursday, 28 May 2009, at 10:55 a.m.
  3 messages -- Newest posted Thursday, 28 May 2009, at 7:21 p.m.
• E Bay Pricing Question -- Jim Shaver - Oakville, Ont, Canada -- Thursday, 28 May 2009, at 1:52 p.m.
  46 messages -- Newest posted Tuesday, 9 June 2009, at 5:57 p.m.
• Block plane repair -- Joe Grittani -- Friday, 29 May 2009, at 10:47 a.m.
  8 messages -- Newest posted Tuesday, 2 June 2009, at 10:02 a.m.
• Anyone ever been to Jamie's flea in Ohio? *LINK* -- cooper suter -- Friday, 29 May 2009, at 5:51 p.m.
  4 messages -- Newest posted Saturday, 30 May 2009, at 11:19 a.m.
• OT - Telecommunications rant (rambly) -- Bill Houghton, Sebastopol, CA -- Friday, 29 May 2009, at 8:06 p.m.
  8 messages -- Newest posted Saturday, 30 May 2009, at 10:16 a.m.
• working with brass questions -- Edward in Vancouver -- Friday, 29 May 2009, at 8:06 p.m.
  5 messages -- Newest posted Monday, 1 June 2009, at 7:37 p.m.
• Chariot Scraper Plane *LINK* *PIC* -- Scott Grandstaff -- Friday, 29 May 2009, at 11:25 p.m.
  20 messages -- Newest posted Tuesday, 2 June 2009, at 9:42 p.m.
• Cutter style for Stanley 45 combination plane? -- Charles R. Smith -- Sunday, 31 May 2009, at 12:53 a.m.
  6 messages -- Newest posted Tuesday, 2 June 2009, at 10:00 p.m.
• This week on the Benefits Auctions -- Bill Houghton, Sebastopol, CA -- Sunday, 31 May 2009, at 10:10 p.m.
  1 message
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 2 June 2009, at 7:23 a.m.
  9 messages -- Newest posted Thursday, 4 June 2009, at 6:54 p.m.
• Books on Benefits Auction - bid deadline Sunday *LINK* *PIC* -- Bill Houghton, Sebastopol, CA -- Thursday, 4 June 2009, at 9:18 p.m.
  1 message
• New plane by Konrad Sauer *LINK* -- Wiley Horne--So. Calif. -- Friday, 5 June 2009, at 3:56 p.m.
  24 messages -- Newest posted Wednesday, 10 June 2009, at 9:08 p.m.
• OT - Calculating load on a gate post for bracing -- Bill Houghton, Sebastopol, CA -- Friday, 5 June 2009, at 4:20 p.m.
  7 messages -- Newest posted Sunday, 7 June 2009, at 4:54 p.m.
• Are Roos good to eat? -- Bill Tindall, E.TN -- Saturday, 6 June 2009, at 9:54 a.m.
  7 messages -- Newest posted Sunday, 7 June 2009, at 7:04 p.m.
• Sharpening the elusive $5.00 card scraper -- Edward in Vancouver -- Saturday, 6 June 2009, at 2:09 p.m.
  29 messages -- Newest posted Thursday, 11 June 2009, at 7:05 a.m.
• Frog Adjusting Screw -- Dave (Arlington, VA) -- Saturday, 6 June 2009, at 8:57 p.m.
  4 messages -- Newest posted Monday, 8 June 2009, at 7:05 p.m.
• FW hearing foot steps from Ohio? -- David Cockey -- Saturday, 6 June 2009, at 11:59 p.m.
  35 messages -- Newest posted Thursday, 18 June 2009, at 11:10 a.m.
• DIY infill: Shaping the infills *LINK* *PIC* -- Craig D -- Sunday, 7 June 2009, at 4:18 a.m.
  1 message
• OT - flat exercise bench *LINK* -- Bill Houghton, Sebastopol, CA -- Monday, 8 June 2009, at 12:26 p.m.
  3 messages -- Newest posted Friday, 12 June 2009, at 12:47 a.m.
• repair and glue used -- Bill Tindall, E.TN -- Monday, 8 June 2009, at 7:55 p.m.
  24 messages -- Newest posted Monday, 15 June 2009, at 4:29 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 9 June 2009, at 7:15 a.m.
  1 message
• AD Stephen's "Hide Glue" book is on sale! *LINK* -- Ellis Walentine -- Tuesday, 9 June 2009, at 2:31 p.m.
  4 messages -- Newest posted Wednesday, 10 June 2009, at 7:38 a.m.
• Trip Report -- Doug Reynolds in Seattle -- Tuesday, 9 June 2009, at 4:45 p.m.
  6 messages -- Newest posted Friday, 12 June 2009, at 9:55 p.m.
• How are natural combination oilstones bonded? *PIC* -- Bill Houghton, Sebastopol, CA -- Tuesday, 9 June 2009, at 7:14 p.m.
  6 messages -- Newest posted Wednesday, 10 June 2009, at 11:48 a.m.
• I'll never worry about square again! -- Hank Knight -- Thursday, 11 June 2009, at 7:16 p.m.
  33 messages -- Newest posted Tuesday, 16 June 2009, at 10:41 a.m.
• Homemade Stains... -- John L. Blue -- Thursday, 11 June 2009, at 9:02 p.m.
  12 messages -- Newest posted Tuesday, 16 June 2009, at 9:24 p.m.
• what to do in Prescott, AZ? -- Roy Anderson -- Thursday, 11 June 2009, at 9:54 p.m.
  3 messages -- Newest posted Friday, 12 June 2009, at 10:42 p.m.
• Shooting Board -- Hank Knight -- Saturday, 13 June 2009, at 6:59 p.m.
  22 messages -- Newest posted Wednesday, 17 June 2009, at 9:09 p.m.
• Any Suggestions for Topics on the HAND TOOL Chat? *NM* -- Stephen Shepherd in the State of Deseret -- Sunday, 14 June 2009, at 1:19 p.m.
  5 messages -- Newest posted Tuesday, 16 June 2009, at 7:44 a.m.
• Some data on wood for bow saws -- Bill Tindall, E.TN -- Sunday, 14 June 2009, at 5:41 p.m.
  8 messages -- Newest posted Monday, 15 June 2009, at 8:59 p.m.
• Recommendation for mallet size -- David Brown -- Sunday, 14 June 2009, at 11:21 p.m.
  16 messages -- Newest posted Tuesday, 23 June 2009, at 12:54 a.m.
• Amputation pocedure? -- Edward in Vancouver -- Tuesday, 16 June 2009, at 10:04 p.m.
  23 messages -- Newest posted Wednesday, 24 June 2009, at 1:59 p.m.
• Stanley-Bailey #8 -- Paul Kramer -- Wednesday, 17 June 2009, at 8:05 p.m.
  8 messages -- Newest posted Friday, 19 June 2009, at 7:09 a.m.
• Making Infill Dovetails -- Tom MacGregor -- Friday, 19 June 2009, at 7:26 a.m.
  5 messages -- Newest posted Friday, 19 June 2009, at 2:37 p.m.
• Best method for Shaping curves with Hand tools *LINK* -- David Brown -- Friday, 19 June 2009, at 11:10 a.m.
  16 messages -- Newest posted Monday, 22 June 2009, at 3:30 p.m.
• Woodworker West scores a scoop on Sam Maloof! *LINK* -- Ellis Walentine -- Friday, 19 June 2009, at 2:16 p.m.
  1 message
• Germantown toolworks hammer *PIC* -- Michael Shelley -- Friday, 19 June 2009, at 9:59 p.m.
  3 messages -- Newest posted Sunday, 21 June 2009, at 1:36 p.m.
• Apache-Sitgreaves Nat'l Forests Comments Request *LINK* -- Pam Niedermayer, Austin, TX -- Friday, 19 June 2009, at 10:32 p.m.
  1 message
• Rockwell stair gauge *PIC* -- David Miller from Iowa -- Saturday, 20 June 2009, at 9:54 p.m.
  2 messages -- Newest posted Saturday, 20 June 2009, at 10:11 p.m.
• DIY Infill, the frog part II *LINK* *PIC* -- Craig D -- Sunday, 21 June 2009, at 4:11 a.m.
  3 messages -- Newest posted Tuesday, 23 June 2009, at 2:19 a.m.
• Old Stanley Sweet Heart question -- Bill Tindall, E.TN -- Sunday, 21 June 2009, at 7:03 a.m.
  5 messages -- Newest posted Monday, 22 June 2009, at 6:48 p.m.
• Happy Father's Day, to all to whom it applies -- Bill Houghton, Sebastopol, CA -- Sunday, 21 June 2009, at 1:07 p.m.
  1 message
• Whatzit *PIC* -- David Miller from Iowa -- Monday, 22 June 2009, at 3:19 p.m.
  5 messages -- Newest posted Wednesday, 24 June 2009, at 9:03 a.m.
• Stanley gage page? -- Bill Houghton, Sebastopol, CA -- Monday, 22 June 2009, at 10:04 p.m.
  3 messages -- Newest posted Tuesday, 23 June 2009, at 9:14 a.m.
• Tuesday Night Hand Tool Chat w/topic -- Stephen Shepherd in the State of Deseret -- Tuesday, 23 June 2009, at 7:19 a.m.
  3 messages -- Newest posted Friday, 26 June 2009, at 7:30 a.m.
• HT use for BIG Wood Chipper blades? -- Dominic in Bucks County PA -- Wednesday, 24 June 2009, at 9:56 a.m.
  11 messages -- Newest posted Thursday, 25 June 2009, at 5:53 p.m.
• question on "antique" hardware installation *PIC* -- Bill Tindall, E.TN -- Wednesday, 24 June 2009, at 10:37 a.m.
  4 messages -- Newest posted Wednesday, 24 June 2009, at 3:38 p.m.
• AD New advertiser --- BetterMusicBoxes.com! *LINK* -- Ellis Walentine -- Wednesday, 24 June 2009, at 11:34 p.m.
  1 message
• commission opportunity - traditional cradle -- Michael Recchione -- Thursday, 25 June 2009, at 12:20 a.m.
  3 messages -- Newest posted Thursday, 25 June 2009, at 8:58 a.m.
• Exploring a 19th century tool chest, questions -- Bill Tindall, E.TN -- Thursday, 25 June 2009, at 8:06 a.m.
  16 messages -- Newest posted Sunday, 28 June 2009, at 4:14 a.m.
• The ULTIMATE dovetail project... *PIC* -- Alan DuBoff -- Thursday, 25 June 2009, at 6:18 p.m.
  36 messages -- Newest posted Saturday, 4 July 2009, at 11:33 a.m.
• Sanford Uni-Ball Power Tank Pens *PIC* -- Alan DuBoff -- Friday, 26 June 2009, at 6:57 a.m.
  11 messages -- Newest posted Saturday, 27 June 2009, at 12:58 p.m.
• LV Scraper Plane Tips? -- Tony - Memphis -- Friday, 26 June 2009, at 4:35 p.m.
  9 messages -- Newest posted Tuesday, 30 June 2009, at 3:04 p.m.
• What did I buy? *PIC* -- Bill Houghton, Sebastopol, CA -- Saturday, 27 June 2009, at 10:12 p.m.
  4 messages -- Newest posted Sunday, 28 June 2009, at 9:23 a.m.
• Christopher Schwarz gave a talk to our club! -- wilbur -- Sunday, 28 June 2009, at 9:01 a.m.
  3 messages -- Newest posted Sunday, 28 June 2009, at 9:20 a.m.
• The Brese Small Smoother Kit *PIC* *LINK* -- Derek Cohen (in Perth, Australia) -- Sunday, 28 June 2009, at 9:17 a.m.
  9 messages -- Newest posted Monday, 29 June 2009, at 3:45 p.m.
• SUCESS! Bowsaw Mark II -- Dominic in Buck's County PA -- Sunday, 28 June 2009, at 9:17 p.m.
  15 messages -- Newest posted Friday, 3 July 2009, at 7:42 p.m.
• Need a Cane Maker Recommendation.... -- Rob Lee -- Monday, 29 June 2009, at 11:41 a.m.
  11 messages -- Newest posted Tuesday, 30 June 2009, at 11:16 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 30 June 2009, at 7:20 a.m.
  1 message
• Traditional Woodworking in China -- Chris Scholz -- Tuesday, 30 June 2009, at 1:35 p.m.
  11 messages -- Newest posted Wednesday, 1 July 2009, at 12:15 p.m.
• Darn... Lost a Customer..... -- Rob Lee -- Tuesday, 30 June 2009, at 1:47 p.m.
  24 messages -- Newest posted Thursday, 2 July 2009, at 11:39 p.m.
• Survey :Bench Slave or Board Jack? -- Andy Lincoln,in Dearborn,MI -- Wednesday, 1 July 2009, at 2:18 p.m.
  15 messages -- Newest posted Sunday, 5 July 2009, at 2:09 p.m.
• Chinese Woodworking: Stock Preparation -- Chris Scholz -- Wednesday, 1 July 2009, at 9:37 p.m.
  6 messages -- Newest posted Friday, 3 July 2009, at 12:09 a.m.
• a rusty present from downtown Philly -- John Pappas -- Wednesday, 1 July 2009, at 11:25 p.m.
  3 messages -- Newest posted Thursday, 2 July 2009, at 10:04 p.m.
• Designing a handplane around an old Sorby iron -- Dominic in Bucks County PA -- Thursday, 2 July 2009, at 2:03 p.m.
  19 messages -- Newest posted Saturday, 11 July 2009, at 10:35 p.m.
• OT - old and in the way -- Bill Houghton, Sebastopol, CA -- Friday, 3 July 2009, at 2:16 p.m.
  3 messages -- Newest posted Saturday, 4 July 2009, at 11:31 a.m.
• Interesting block plane on eBay *LINK* -- Marv -- Friday, 3 July 2009, at 7:28 p.m.
  7 messages -- Newest posted Saturday, 4 July 2009, at 4:33 p.m.
• OT - very creative *NM* *LINK* -- Stephen Shepherd in the State of Deseret -- Sunday, 5 July 2009, at 8:57 a.m.
  3 messages -- Newest posted Sunday, 5 July 2009, at 12:48 p.m.
• Best finish for Poplar? -- Victor Parisian -- Sunday, 5 July 2009, at 11:35 a.m.
  17 messages -- Newest posted Wednesday, 8 July 2009, at 1:30 p.m.
• Fret Work Lay-Out Question -- Bill Tindall, E.TN -- Sunday, 5 July 2009, at 4:47 p.m.
  14 messages -- Newest posted Monday, 3 August 2009, at 9:15 a.m.
• #8 Repaired *PIC* -- Paul Kramer -- Sunday, 5 July 2009, at 6:50 p.m.
  3 messages -- Newest posted Monday, 6 July 2009, at 1:06 p.m.
• Coffin Smoother *PIC* -- Paul Kramer -- Sunday, 5 July 2009, at 7:13 p.m.
  5 messages -- Newest posted Monday, 6 July 2009, at 1:06 p.m.
• LN fishtail chisels *LINK* -- Pam Niedermayer, Austin, TX -- Monday, 6 July 2009, at 7:52 a.m.
  22 messages -- Newest posted Thursday, 9 July 2009, at 2:20 p.m.
• Hand Tool Chat, topic suggestions -- Stephen Shepherd in the State of Deseret -- Monday, 6 July 2009, at 7:57 a.m.
  5 messages -- Newest posted Monday, 6 July 2009, at 10:28 p.m.
• 4Th of July Dovetails -- Hank Knight -- Monday, 6 July 2009, at 2:17 p.m.
  8 messages -- Newest posted Monday, 6 July 2009, at 10:43 p.m.
• chair leg amputation revisited -- Edward in Vancouver -- Monday, 6 July 2009, at 10:22 p.m.
  4 messages -- Newest posted Tuesday, 7 July 2009, at 12:45 p.m.
• In the works... *PIC* -- James Watriss -- Tuesday, 7 July 2009, at 12:42 a.m.
  9 messages -- Newest posted Thursday, 9 July 2009, at 12:37 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 7 July 2009, at 7:19 a.m.
  1 message
• Pocket knives being threatened... sorry to do this -- James Watriss -- Tuesday, 7 July 2009, at 8:22 a.m.
  38 messages -- Newest posted Saturday, 11 July 2009, at 11:10 p.m.
• Scraper Plane Update -- Tony - Memphis -- Tuesday, 7 July 2009, at 12:07 p.m.
  2 messages -- Newest posted Tuesday, 7 July 2009, at 3:31 p.m.
• philosophical discussion on classes, etc. -- Bill Tindall, E.TN -- Tuesday, 7 July 2009, at 3:03 p.m.
  19 messages -- Newest posted Saturday, 11 July 2009, at 1:44 p.m.
• Warning: Electrons Involved -- Stephen Shepherd in the State of Deseret -- Wednesday, 8 July 2009, at 7:57 p.m.
  10 messages -- Newest posted Friday, 10 July 2009, at 4:34 p.m.
• DIY infill: Exploded view *LINK* *PIC* -- Craig D -- Wednesday, 8 July 2009, at 9:49 p.m.
  12 messages -- Newest posted Saturday, 11 July 2009, at 11:39 p.m.
• strangest eBay auction I've ever seen. -- James Watriss -- Thursday, 9 July 2009, at 9:44 a.m.
  6 messages -- Newest posted Thursday, 9 July 2009, at 1:56 p.m.
• Benefit Auction: Akio Tasai paring chisel, 6mm -- Wiley Horne--So. Calif. -- Thursday, 9 July 2009, at 4:21 p.m.
  1 message
• Special Guest, Hand Tool Chat *LINK* -- Stephen Shepherd in the State of Deseret -- Friday, 10 July 2009, at 8:13 a.m.
  1 message
• Update; finished table *PIC* -- James Watriss -- Friday, 10 July 2009, at 8:45 p.m.
  16 messages -- Newest posted Saturday, 11 July 2009, at 5:38 p.m.
• Anybody ever stuff a Hock or other aftermarket... -- Antbody ever stuff a Hock or other aftermarket... -- Friday, 10 July 2009, at 9:52 p.m.
  9 messages -- Newest posted Monday, 13 July 2009, at 2:01 a.m.
• Lee Valley replacement blades for Stanley planes.. -- Scott Burr in Ben Lomond CA -- Sunday, 12 July 2009, at 1:47 p.m.
  12 messages -- Newest posted Tuesday, 14 July 2009, at 11:22 a.m.
• What is this? *PIC* -- David Miller from Iowa -- Sunday, 12 July 2009, at 5:51 p.m.
  19 messages -- Newest posted Monday, 20 July 2009, at 11:57 a.m.
• Metate for Japanese saws -- Gordon Thomas -- Sunday, 12 July 2009, at 11:15 p.m.
  10 messages -- Newest posted Sunday, 2 August 2009, at 10:58 a.m.
• Interesting video on rasp making *LINK* -- Frank D. in Montreal -- Monday, 13 July 2009, at 6:53 p.m.
  14 messages -- Newest posted Sunday, 19 July 2009, at 1:01 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 14 July 2009, at 7:20 a.m.
  1 message
• Re-use of worn plane irons -- Jay Samuels -- Tuesday, 14 July 2009, at 1:11 p.m.
  4 messages -- Newest posted Wednesday, 15 July 2009, at 9:10 a.m.
• Lee Valley tail vise? -- GAB -- Tuesday, 14 July 2009, at 2:09 p.m.
  44 messages -- Newest posted Wednesday, 5 August 2009, at 10:15 a.m.
• What's a good "starter plane"? -- Dan Mitchell -- Tuesday, 14 July 2009, at 8:25 p.m.
  33 messages -- Newest posted Friday, 17 July 2009, at 6:29 p.m.
• Goldilocks and the three drills *PIC* -- Bill Houghton, Sebastopol, CA -- Wednesday, 15 July 2009, at 2:06 p.m.
  1 message
• Tuning up Wood Rebate, T&G and Plough Planes------ -- Bert Bleckwenn------WebKitFormBoundary3cBabUYv+3+c -- Wednesday, 15 July 2009, at 8:53 p.m.
  3 messages -- Newest posted Friday, 17 July 2009, at 8:12 p.m.
• sack back Windsor *PIC* -- McKay -- Thursday, 16 July 2009, at 12:18 p.m.
  10 messages -- Newest posted Friday, 17 July 2009, at 4:34 p.m.
• In case anyone should need a WW mag article -- Dan Mitchell -- Thursday, 16 July 2009, at 3:01 p.m.
  29 messages -- Newest posted Sunday, 26 July 2009, at 6:52 p.m.
• *** SURVEY: THE IDES OF JULY *** *LINK* -- Ellis Walentine -- Friday, 17 July 2009, at 10:46 a.m.
  15 messages -- Newest posted Sunday, 19 July 2009, at 11:15 p.m.
• Ellis is trying new software *LINK* -- Bill Houghton, Sebastopol, CA -- Friday, 17 July 2009, at 10:58 p.m.
  2 messages -- Newest posted Saturday, 18 July 2009, at 12:16 a.m.
• Left-bevel hatchet/axe -- Chris F -- Saturday, 18 July 2009, at 1:26 p.m.
  6 messages -- Newest posted Monday, 20 July 2009, at 11:23 a.m.
• Bedrock prices -- Victor -- Saturday, 18 July 2009, at 4:10 p.m.
  4 messages -- Newest posted Monday, 20 July 2009, at 9:05 p.m.
• DIY Infill: Finished! *big PICs* *LINK* -- Craig D -- Saturday, 18 July 2009, at 8:36 p.m.
  30 messages -- Newest posted Friday, 24 July 2009, at 7:49 p.m.
• Bill Tindall and his fretwork tray -- Wiley Horne--So. Calif. -- Sunday, 19 July 2009, at 1:39 p.m.
  1 message
• This week on the Benefits Auctions *LINK* -- Bill Houghton, Sebastopol, CA -- Sunday, 19 July 2009, at 9:07 p.m.
  3 messages -- Newest posted Monday, 20 July 2009, at 11:35 a.m.
• The Gathering 09- a report -- Sgian Dubh -- Monday, 20 July 2009, at 5:45 a.m.
  4 messages -- Newest posted Monday, 20 July 2009, at 11:58 a.m.
• NEW Shop Shots - #910 - #913 -- David Yoho -- Monday, 20 July 2009, at 8:17 a.m.
  2 messages -- Newest posted Thursday, 23 July 2009, at 10:57 a.m.
• hollow grind vs. face grind *LINK* -- DaleLenz -- Monday, 20 July 2009, at 8:14 p.m.
  21 messages -- Newest posted Wednesday, 29 July 2009, at 2:05 p.m.
• Aprox . grit? -- Edward in Vancouver -- Monday, 20 July 2009, at 11:30 p.m.
  1 message
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 21 July 2009, at 7:40 a.m.
  1 message
• Last Chance: THE IDES OF JULY *LINK* -- Ellis Walentine -- Tuesday, 21 July 2009, at 2:28 p.m.
  1 message
• What's the purpose of this spokeshave? *LINK* -- Bill Houghton, Sebastopol, CA -- Tuesday, 21 July 2009, at 4:16 p.m.
  5 messages -- Newest posted Thursday, 23 July 2009, at 1:39 p.m.
• Handle/knob selection for bowsaw -- Dominic in Buck's County PA -- Wednesday, 22 July 2009, at 9:10 p.m.
  15 messages -- Newest posted Saturday, 25 July 2009, at 8:41 p.m.
• Nice 'ol D.R. Barton Broad Axe -- Alan DuBoff -- Thursday, 23 July 2009, at 12:29 a.m.
  22 messages -- Newest posted Friday, 7 August 2009, at 1:43 p.m.
• Last Chance: THE IDES OF JULY *LINK* -- Ellis Walentine -- Friday, 24 July 2009, at 10:52 a.m.
  1 message
• What is the name of the stuff... -- Stephen Shepherd in the State of Deseret -- Friday, 24 July 2009, at 9:32 p.m.
  12 messages -- Newest posted Tuesday, 28 July 2009, at 3:21 a.m.
• PTAMPIA Vol. 1 -- Gary Roberts -- Friday, 24 July 2009, at 11:48 p.m.
  3 messages -- Newest posted Saturday, 25 July 2009, at 2:39 p.m.
• Drum roll, please...We have a winner! -- Ellis Walentine -- Saturday, 25 July 2009, at 4:23 a.m.
  4 messages -- Newest posted Sunday, 26 July 2009, at 1:06 p.m.
• Help ID Plane *LINK* -- Dale Stansbery -- Saturday, 25 July 2009, at 9:29 p.m.
  2 messages -- Newest posted Sunday, 26 July 2009, at 12:53 a.m.
• Level type studies? Rambles a bit *LINK* *PIC* -- Bill Houghton, Sebastopol, CA -- Sunday, 26 July 2009, at 5:44 p.m.
  2 messages -- Newest posted Monday, 27 July 2009, at 12:20 p.m.
• Saw question -- Wiley Horne--So. Calif. -- Sunday, 26 July 2009, at 11:24 p.m.
  28 messages -- Newest posted Wednesday, 12 August 2009, at 3:18 a.m.
• Input needed *LINK* -- Wiley Horne--So. Calif. -- Monday, 27 July 2009, at 12:39 a.m.
  12 messages -- Newest posted Wednesday, 29 July 2009, at 2:24 p.m.
• Chat tomorrow night *LINK* -- Stephen Shepherd in the State of Deseret -- Monday, 27 July 2009, at 8:14 a.m.
  1 message
• The Ultimate Jack? -- Derek Cohen (in Perth, Australia) -- Monday, 27 July 2009, at 11:08 a.m.
  10 messages -- Newest posted Saturday, 1 August 2009, at 6:05 p.m.
• Carbide blade scraper - turning a burr? -- Dave (Arlington, VA) -- Monday, 27 July 2009, at 7:43 p.m.
  3 messages -- Newest posted Tuesday, 28 July 2009, at 8:05 p.m.
• Special Guest - Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 28 July 2009, at 7:50 a.m.
  3 messages -- Newest posted Wednesday, 29 July 2009, at 6:35 p.m.
• In praise of Southern pine -- Patrick Gibbons, Katy, TX -- Tuesday, 28 July 2009, at 9:19 a.m.
  2 messages -- Newest posted Wednesday, 29 July 2009, at 10:55 p.m.
• Lie-Nielsen/Stanley 48? -- Dave Thompson -- Wednesday, 29 July 2009, at 11:35 p.m.
  6 messages -- Newest posted Wednesday, 5 August 2009, at 12:16 a.m.
• adjuster repair -- Bruce, a MN Galoot -- Thursday, 30 July 2009, at 2:34 a.m.
  8 messages -- Newest posted Sunday, 2 August 2009, at 1:37 a.m.
• After 3000 years or so they finally... *LINK* *PIC* -- Stephen Shepherd in the State of Deseret -- Friday, 31 July 2009, at 8:18 a.m.
  11 messages -- Newest posted Sunday, 2 August 2009, at 5:29 p.m.
• Stanley 55 question -- Bill Tindall, E.TN -- Friday, 31 July 2009, at 9:55 a.m.
  9 messages -- Newest posted Sunday, 2 August 2009, at 7:51 p.m.
• Survey on Infill Planes and/or Kits -- Andy Lincoln,in Dearborn,MI -- Friday, 31 July 2009, at 2:04 p.m.
  18 messages -- Newest posted Wednesday, 5 August 2009, at 12:15 a.m.
• Recent Student Work -- Sgian Dubh -- Saturday, 1 August 2009, at 3:48 a.m.
  10 messages -- Newest posted Monday, 3 August 2009, at 2:58 p.m.
• Todd hughes -- redcoat -- Saturday, 1 August 2009, at 4:30 a.m.
  4 messages -- Newest posted Saturday, 1 August 2009, at 9:39 p.m.
• Happens every year; garage saling -- Moses Yoder -- Saturday, 1 August 2009, at 8:09 p.m.
  12 messages -- Newest posted Monday, 3 August 2009, at 8:48 p.m.
• Made this timber mallet today. (a.k.a."persuader") *PIC* -- Alan DuBoff -- Sunday, 2 August 2009, at 12:17 a.m.
  4 messages -- Newest posted Sunday, 2 August 2009, at 7:16 p.m.
• back again *PIC* -- redcoat -- Sunday, 2 August 2009, at 1:43 a.m.
  22 messages -- Newest posted Wednesday, 5 August 2009, at 12:11 a.m.
• Building a Jack Plane - pictorial *LINK* -- Derek Cohen (in Perth, Australia) -- Sunday, 2 August 2009, at 12:22 p.m.
  7 messages -- Newest posted Friday, 7 August 2009, at 10:20 a.m.
• New/Old Plane Iron -- Sawman -- Sunday, 2 August 2009, at 12:53 p.m.
  2 messages -- Newest posted Sunday, 2 August 2009, at 1:02 p.m.
• guy that makes hand saws -- Dan Collins -- Sunday, 2 August 2009, at 4:23 p.m.
  11 messages -- Newest posted Wednesday, 5 August 2009, at 4:12 p.m.
• A bowsaw in the wild! A rarity in this area! *PIC* -- Bill Houghton, Sebastopol, CA -- Sunday, 2 August 2009, at 5:48 p.m.
  12 messages -- Newest posted Wednesday, 5 August 2009, at 4:32 p.m.
• nice tools for carpentry? -- Joe Shelton -- Sunday, 2 August 2009, at 9:12 p.m.
  8 messages -- Newest posted Monday, 3 August 2009, at 1:15 p.m.
• How to make black oxide coating -- Bill Tindall, E.TN -- Sunday, 2 August 2009, at 9:47 p.m.
  27 messages -- Newest posted Saturday, 8 August 2009, at 2:16 p.m.
• OT - used book internet sources -- Bill Houghton, Sebastopol, CA -- Monday, 3 August 2009, at 1:16 p.m.
  3 messages -- Newest posted Tuesday, 4 August 2009, at 4:23 a.m.
• laying out the fret work *PIC* -- Bill Tindall, E.TN -- Monday, 3 August 2009, at 10:14 p.m.
  6 messages -- Newest posted Wednesday, 5 August 2009, at 10:04 p.m.
• music to work to...? -- redcoat -- Monday, 3 August 2009, at 10:49 p.m.
  18 messages -- Newest posted Friday, 7 August 2009, at 7:45 p.m.
• Spot any non-existent tools on this bench? *PIC* -- Dave Thompson -- Monday, 3 August 2009, at 11:02 p.m.
  7 messages -- Newest posted Friday, 7 August 2009, at 7:26 p.m.
• How Do You Fuse Acrylic Resin . . . -- Tom Colligan -- Monday, 3 August 2009, at 11:35 p.m.
  7 messages -- Newest posted Saturday, 8 August 2009, at 3:50 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 4 August 2009, at 7:34 a.m.
  1 message
• 7thcentury boat from junk *LINK* -- redcoat -- Tuesday, 4 August 2009, at 11:45 a.m.
  4 messages -- Newest posted Wednesday, 5 August 2009, at 12:40 a.m.
• What mark is this? *PIC* -- David Miller from Iowa -- Thursday, 6 August 2009, at 11:29 a.m.
  2 messages -- Newest posted Thursday, 6 August 2009, at 6:00 p.m.
• Stanley Tools advertisement -- Victor P -- Thursday, 6 August 2009, at 6:02 p.m.
  6 messages -- Newest posted Saturday, 8 August 2009, at 6:14 p.m.
• Nude woodworking- a closer look -- redcoat -- Thursday, 6 August 2009, at 7:41 p.m.
  13 messages -- Newest posted Friday, 7 August 2009, at 7:11 p.m.
• Wooden bench screws--who is maker? -- Wiley Horne--So. Calif. -- Friday, 7 August 2009, at 2:43 p.m.
  20 messages -- Newest posted Saturday, 8 August 2009, at 10:37 p.m.
• What Level is This? *PIC* -- David Miller from Iowa -- Saturday, 8 August 2009, at 8:28 a.m.
  6 messages -- Newest posted Sunday, 9 August 2009, at 7:09 p.m.
• Show me your Toolboxes and/or Totes -- Alan DuBoff -- Saturday, 8 August 2009, at 3:01 p.m.
  37 messages -- Newest posted Friday, 14 August 2009, at 9:40 p.m.
• Neat vise *LINK* -- Marv -- Saturday, 8 August 2009, at 3:40 p.m.
  7 messages -- Newest posted Saturday, 8 August 2009, at 7:30 p.m.
• New Video Review: Cornice Moldings *LINK* -- Ellis Walentine, Host -- Sunday, 9 August 2009, at 6:04 a.m.
  2 messages -- Newest posted Sunday, 9 August 2009, at 11:35 a.m.
• shop made saw vise *PIC* -- Roy Anderson -- Sunday, 9 August 2009, at 10:05 a.m.
  2 messages -- Newest posted Sunday, 9 August 2009, at 11:39 a.m.
• Posting multiple pics in a post. -- Scott Burr in Ben Lomond CA -- Sunday, 9 August 2009, at 5:01 p.m.
  21 messages -- Newest posted Tuesday, 11 August 2009, at 12:28 p.m.
• A quote I just found -- Bill Houghton, Sebastopol, CA -- Sunday, 9 August 2009, at 5:08 p.m.
  3 messages -- Newest posted Monday, 10 August 2009, at 9:21 p.m.
• OT - remodels and shop improvements -- Bill Houghton, Sebastopol, CA -- Sunday, 9 August 2009, at 7:23 p.m.
  6 messages -- Newest posted Tuesday, 11 August 2009, at 1:22 a.m.
• almost famous -- redcoat -- Sunday, 9 August 2009, at 9:27 p.m.
  4 messages -- Newest posted Tuesday, 11 August 2009, at 1:26 a.m.
• miter box saws -- Andy Lincoln,in Dearborn MI -- Sunday, 9 August 2009, at 11:37 p.m.
  11 messages -- Newest posted Tuesday, 11 August 2009, at 10:06 p.m.
• ***Welcome our new Co-Moderator!*** *LINK* -- Ellis Walentine -- Monday, 10 August 2009, at 7:54 a.m.
  19 messages -- Newest posted Tuesday, 11 August 2009, at 11:50 p.m.
• Blackened Trunk Handles *PIC* -- Bill Tindall, E.TN -- Monday, 10 August 2009, at 1:15 p.m.
  29 messages -- Newest posted Thursday, 13 August 2009, at 11:55 p.m.
• stones -- redcoat -- Monday, 10 August 2009, at 1:36 p.m.
  8 messages -- Newest posted Tuesday, 11 August 2009, at 9:21 a.m.
• moulding plane iron service -- redcoat -- Monday, 10 August 2009, at 1:38 p.m.
  4 messages -- Newest posted Tuesday, 11 August 2009, at 9:21 p.m.
• Somewhat OT - Tutankhamen exhibit -- Bill Houghton, Sebastopol, CA -- Monday, 10 August 2009, at 8:50 p.m.
  16 messages -- Newest posted Wednesday, 12 August 2009, at 11:20 p.m.
• Nude woodworking part deux *PIC* -- redcoat -- Tuesday, 11 August 2009, at 1:32 a.m.
  2 messages -- Newest posted Wednesday, 12 August 2009, at 8:14 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 11 August 2009, at 9:29 a.m.
  1 message
• Yet another eBay rant -- Bill Houghton, Sebastopol, CA -- Tuesday, 11 August 2009, at 12:21 p.m.
  12 messages -- Newest posted Wednesday, 12 August 2009, at 1:41 p.m.
• OT- shop lights -- Bill Houghton, Sebastopol, CA -- Tuesday, 11 August 2009, at 2:34 p.m.
  1 message
• sharpening a draw knife -- Bob in Green Bay -- Tuesday, 11 August 2009, at 6:11 p.m.
  16 messages -- Newest posted Friday, 14 August 2009, at 3:40 a.m.
• Woodworking in America -- dave Jeske -- Tuesday, 11 August 2009, at 10:27 p.m.
  4 messages -- Newest posted Wednesday, 12 August 2009, at 8:18 p.m.
• eBay - others may know this -- Bill Houghton, Sebastopol, CA -- Wednesday, 12 August 2009, at 1:24 p.m.
  12 messages -- Newest posted Friday, 14 August 2009, at 3:08 a.m.
• Need some help with a pulley... *LINK* -- Scott Burr in Ben Lomond CA -- Wednesday, 12 August 2009, at 8:34 p.m.
  13 messages -- Newest posted Friday, 14 August 2009, at 6:54 p.m.
• Sharpening esotericism and maybe even eroticism *LINK* -- David Barnett - SW FL Gulf Coast -- Thursday, 13 August 2009, at 12:30 p.m.
  20 messages -- Newest posted Sunday, 16 August 2009, at 10:36 p.m.
• The Secret of the Sung Hua Stone -- Chris Scholz -- Thursday, 13 August 2009, at 2:41 p.m.
  6 messages -- Newest posted Saturday, 15 August 2009, at 2:15 p.m.
• What is this? *PIC* -- David Miller from Iowa -- Thursday, 13 August 2009, at 9:44 p.m.
  5 messages -- Newest posted Wednesday, 19 August 2009, at 1:56 p.m.
• Re-surfacing waterstones -- Sawman -- Friday, 14 August 2009, at 7:38 a.m.
  10 messages -- Newest posted Saturday, 15 August 2009, at 1:22 a.m.
• Two man crosscut saw -- Randy Johnson Connersville IN -- Friday, 14 August 2009, at 10:13 p.m.
  4 messages -- Newest posted Monday, 17 August 2009, at 9:27 p.m.
• Shooting board comparison for Bugbear -- Derek Cohen (in Perth, Australia) -- Sunday, 16 August 2009, at 9:19 a.m.
  24 messages -- Newest posted Tuesday, 18 August 2009, at 12:47 a.m.
• William Morris -- Dave Thompson -- Sunday, 16 August 2009, at 6:29 p.m.
  1 message
• Just got back from W.I.A. -- Roy Anderson -- Sunday, 16 August 2009, at 10:16 p.m.
  56 messages -- Newest posted Wednesday, 19 August 2009, at 6:22 p.m.
• On the Big Walls with LV item -- ThomD -- Monday, 17 August 2009, at 11:33 a.m.
  4 messages -- Newest posted Friday, 21 August 2009, at 3:10 a.m.
• Download these books off Google -- Roy Anderson -- Monday, 17 August 2009, at 12:26 p.m.
  4 messages -- Newest posted Tuesday, 18 August 2009, at 11:57 a.m.
• Ramped shooting board vs skew ? for Derek et al -- Alex Yeilding -- Monday, 17 August 2009, at 2:20 p.m.
  21 messages -- Newest posted Friday, 21 August 2009, at 2:49 a.m.
• French Feet -- John Hoffman -- Monday, 17 August 2009, at 3:55 p.m.
  7 messages -- Newest posted Monday, 17 August 2009, at 11:36 p.m.
• Plane iron question -- Sawman -- Monday, 17 August 2009, at 5:11 p.m.
  3 messages -- Newest posted Monday, 17 August 2009, at 10:05 p.m.
• Lie-Nielsen Hand Tool Event Comes to Seattle Area -- Doug Reynolds in Seattle -- Monday, 17 August 2009, at 5:52 p.m.
  1 message
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 18 August 2009, at 7:25 a.m.
  1 message
• A good product *LINK* -- Wiley Horne--So. Calif. -- Tuesday, 18 August 2009, at 2:11 p.m.
  29 messages -- Newest posted Wednesday, 26 August 2009, at 11:55 p.m.
• A finishing question - old cherry... -- John Aniano - in central NJ... -- Wednesday, 19 August 2009, at 11:24 a.m.
  13 messages -- Newest posted Friday, 21 August 2009, at 10:36 a.m.
• Brass wheel brush -- Dave (Arlington, VA) -- Wednesday, 19 August 2009, at 2:39 p.m.
  7 messages -- Newest posted Sunday, 23 August 2009, at 5:14 p.m.
• MTWCA Show Laporte Ind Sat Aug 22 -- Slav Jelesijevich -- Thursday, 20 August 2009, at 2:00 a.m.
  1 message
• Summer workshop at the College of the Redwoods *LINK* *PIC* -- amelon -- Thursday, 20 August 2009, at 2:37 a.m.
  37 messages -- Newest posted Sunday, 23 August 2009, at 12:18 p.m.
• Marcou Planes -- Fred West in West Chester, PA -- Thursday, 20 August 2009, at 12:28 p.m.
  19 messages -- Newest posted Saturday, 22 August 2009, at 12:10 p.m.
• Some projects just take longer... *PIC* -- ThomD -- Friday, 21 August 2009, at 3:24 a.m.
  8 messages -- Newest posted Saturday, 22 August 2009, at 8:09 a.m.
• What is wrong with this picture? *PIC* -- Stephen Shepherd in the State of Deseret -- Friday, 21 August 2009, at 7:45 a.m.
  14 messages -- Newest posted Sunday, 23 August 2009, at 11:33 p.m.
• Funny pliers *PIC* -- David Miller from Iowa -- Friday, 21 August 2009, at 11:48 a.m.
  12 messages -- Newest posted Sunday, 23 August 2009, at 6:38 p.m.
• Totally OT (mostly) good with a knife? *LINK* -- Dan Donaldson -- Friday, 21 August 2009, at 11:07 p.m.
  1 message
• New Video Review -- Japanese Planes *LINK* -- Ellis Walentine -- Saturday, 22 August 2009, at 11:54 a.m.
  12 messages -- Newest posted Wednesday, 26 August 2009, at 2:17 a.m.
• Cross posting *LINK* -- Bill Houghton, Sebastopol, CA -- Saturday, 22 August 2009, at 9:03 p.m.
  1 message
• What do you do while glue dries? *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 23 August 2009, at 8:32 a.m.
  8 messages -- Newest posted Monday, 24 August 2009, at 7:50 p.m.
• Things that hand tools do easily -- Roy Anderson -- Sunday, 23 August 2009, at 9:07 p.m.
  32 messages -- Newest posted Saturday, 29 August 2009, at 12:52 p.m.
• Reaching the limit of Veritas planes? -- Denis Chénard, Orléans, Ont. -- Monday, 24 August 2009, at 12:55 a.m.
  25 messages -- Newest posted Tuesday, 1 September 2009, at 12:10 a.m.
• 18th c, /19th c, clamps? -- Phil in NNJ -- Monday, 24 August 2009, at 2:32 p.m.
  19 messages -- Newest posted Saturday, 29 August 2009, at 12:14 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 25 August 2009, at 7:36 a.m.
  1 message
• Shoulder Plane Question -- Sawman -- Tuesday, 25 August 2009, at 6:33 p.m.
  16 messages -- Newest posted Thursday, 27 August 2009, at 7:38 p.m.
• donkey ear shooting board -- Roy Anderson -- Tuesday, 25 August 2009, at 7:31 p.m.
  3 messages -- Newest posted Wednesday, 26 August 2009, at 4:41 p.m.
• Marcou Plane ORDERED! *PIC* -- Fred West in West Chester, PA -- Wednesday, 26 August 2009, at 3:29 p.m.
  8 messages -- Newest posted Friday, 28 August 2009, at 8:35 p.m.
• OT Somewhat John Deere Tools -- Andy Lincoln,in Dearborn,MI -- Thursday, 27 August 2009, at 2:02 p.m.
  3 messages -- Newest posted Thursday, 27 August 2009, at 4:15 p.m.
• anything special about gluing satinwood? -- Bill Tindall, E.TN -- Thursday, 27 August 2009, at 2:21 p.m.
  12 messages -- Newest posted Friday, 28 August 2009, at 8:09 p.m.
• Seeking best ideas for clamp storage... *PIC* -- John Aniano in NJ... -- Thursday, 27 August 2009, at 9:59 p.m.
  32 messages -- Newest posted Friday, 4 September 2009, at 10:03 a.m.
• Stanley Hand Tools Parts List 35P for 1963 *LINK* -- Gary Roberts -- Friday, 28 August 2009, at 12:15 a.m.
  2 messages -- Newest posted Saturday, 29 August 2009, at 9:18 p.m.
• Router Plane blades(attn:Rob Lee) -- Jack Guzman from Maine -- Friday, 28 August 2009, at 7:19 a.m.
  3 messages -- Newest posted Friday, 28 August 2009, at 9:44 a.m.
• Gloat -- David Miller from Iowa -- Friday, 28 August 2009, at 9:51 a.m.
  5 messages -- Newest posted Saturday, 29 August 2009, at 9:23 p.m.
• Starving Glue Joint -- Warren in Lancaster, PA -- Friday, 28 August 2009, at 3:51 p.m.
  20 messages -- Newest posted Monday, 31 August 2009, at 1:17 p.m.
• Veneering with hide glue -- Moses Yoder -- Friday, 28 August 2009, at 7:57 p.m.
  6 messages -- Newest posted Saturday, 29 August 2009, at 9:29 p.m.
• Hand Grinder -- Roy Girolami------WebKitFormBoundary9yANUT8mn8C+Zo -- Friday, 28 August 2009, at 9:37 p.m.
  3 messages -- Newest posted Sunday, 30 August 2009, at 1:07 p.m.
• Build thread on SMC *LINK* -- Eric Hartunian -- Friday, 28 August 2009, at 10:40 p.m.
  10 messages -- Newest posted Monday, 31 August 2009, at 3:26 p.m.
• Lee Valley getting so nice....aw, shucks -- Wiley Horne--So. Calif. -- Friday, 28 August 2009, at 10:58 p.m.
  16 messages -- Newest posted Wednesday, 2 September 2009, at 7:51 a.m.
• Setting a rebate plane blade - revisited #1 *PIC* -- Derek Cohen (in Perth, Australia) -- Saturday, 29 August 2009, at 10:11 a.m.
  9 messages -- Newest posted Sunday, 30 August 2009, at 9:23 a.m.
• Made a nice find today *PIC* -- Bart Leetch -- Saturday, 29 August 2009, at 4:45 p.m.
  12 messages -- Newest posted Sunday, 30 August 2009, at 1:04 p.m.
• Help me buy grandpa's anvil -- Moses Yoder -- Saturday, 29 August 2009, at 5:27 p.m.
  10 messages -- Newest posted Monday, 31 August 2009, at 9:02 p.m.
• The wonderful work of Marv *PIC* -- MikeW -- Sunday, 30 August 2009, at 12:08 p.m.
  16 messages -- Newest posted Monday, 31 August 2009, at 9:53 p.m.
• saw sharpening device -- chichi1golf -- Sunday, 30 August 2009, at 3:58 p.m.
  78 messages -- Newest posted Wednesday, 9 September 2009, at 5:12 p.m.
• Saw storage in tool cabinet -- Dominic in Buck's County PA -- Sunday, 30 August 2009, at 8:38 p.m.
  22 messages -- Newest posted Wednesday, 2 September 2009, at 11:46 p.m.
• Japanese chisel bevel angle -- Jack Guzman from Maine -- Monday, 31 August 2009, at 8:03 a.m.
  27 messages -- Newest posted Friday, 4 September 2009, at 2:31 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 1 September 2009, at 8:49 a.m.
  1 message
• Brace wood choice . . . *PIC* -- steve mackay -- Wednesday, 2 September 2009, at 1:18 p.m.
  18 messages -- Newest posted Friday, 4 September 2009, at 6:11 p.m.
• Driving by... -- James Watriss -- Wednesday, 2 September 2009, at 9:39 p.m.
  12 messages -- Newest posted Monday, 7 September 2009, at 6:03 p.m.
• Shouldn't it be... -- Stephen Shepherd in the State of Deseret -- Thursday, 3 September 2009, at 8:25 a.m.
  4 messages -- Newest posted Thursday, 3 September 2009, at 1:23 p.m.
• OT only in Florida ;-) *NM* *PIC* -- Dan Donaldson -- Thursday, 3 September 2009, at 12:24 p.m.
  6 messages -- Newest posted Friday, 4 September 2009, at 11:39 a.m.
• Need help with a plane *LINK* -- Stephen Shepherd in the State of Deseret -- Thursday, 3 September 2009, at 8:28 p.m.
  10 messages -- Newest posted Saturday, 5 September 2009, at 5:36 p.m.
• Who is going to Valley Forge for the -- Victor Parisian -- Friday, 4 September 2009, at 11:41 a.m.
  2 messages -- Newest posted Friday, 4 September 2009, at 2:16 p.m.
• Rabbet Plane *LINK* *PIC* -- Bob Henderson -- Friday, 4 September 2009, at 1:05 p.m.
  11 messages -- Newest posted Tuesday, 8 September 2009, at 11:11 a.m.
• Find beech wood , , , -- steve mackay -- Saturday, 5 September 2009, at 9:38 p.m.
  3 messages -- Newest posted Saturday, 5 September 2009, at 11:25 p.m.
• W. Butcher gouge questions -- Bill Houghton, Sebastopol, CA -- Sunday, 6 September 2009, at 12:13 a.m.
  14 messages -- Newest posted Monday, 7 September 2009, at 4:07 p.m.
• Tormek question, Derek and others -- Wiley Horne--So. Calif. -- Sunday, 6 September 2009, at 2:33 p.m.
  18 messages -- Newest posted Monday, 7 September 2009, at 11:18 a.m.
• Hunt board finished at long, long last -- Hank Knight -- Sunday, 6 September 2009, at 4:58 p.m.
  12 messages -- Newest posted Monday, 7 September 2009, at 5:25 p.m.
• Grinding Nirvana - Tormek and more *PIC* -- Derek Cohen (in Perth, Australia) -- Monday, 7 September 2009, at 11:48 a.m.
  26 messages -- Newest posted Monday, 9 November 2009, at 6:45 a.m.
• "Lightweight" metal spokeshaves *PIC* -- Bill Houghton, Sebastopol, CA -- Monday, 7 September 2009, at 12:35 p.m.
  7 messages -- Newest posted Tuesday, 8 September 2009, at 12:11 a.m.
• paint spatter -- Jack Guzman from Maine -- Monday, 7 September 2009, at 5:06 p.m.
  3 messages -- Newest posted Monday, 7 September 2009, at 9:12 p.m.
• Rusty old anvils -- Moses Yoder -- Monday, 7 September 2009, at 6:15 p.m.
  11 messages -- Newest posted Wednesday, 9 September 2009, at 12:46 a.m.
• My first hand cut dovetails! -- Dominic in Buck's County PA -- Monday, 7 September 2009, at 7:06 p.m.
  15 messages -- Newest posted Tuesday, 8 September 2009, at 6:43 p.m.
• Nostalgia trip- making a cant hook handle *PIC* -- Bill Tindall, E.TN -- Monday, 7 September 2009, at 9:53 p.m.
  5 messages -- Newest posted Tuesday, 8 September 2009, at 6:32 p.m.
• Replacement iron for a #6? -- Edward in Vancouver -- Tuesday, 8 September 2009, at 1:13 a.m.
  9 messages -- Newest posted Wednesday, 9 September 2009, at 11:45 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 8 September 2009, at 7:27 a.m.
  1 message
• New bench construction - some electrons expended.. -- John Aniano in central NJ... -- Tuesday, 8 September 2009, at 10:15 a.m.
  8 messages -- Newest posted Thursday, 10 September 2009, at 8:59 p.m.
• Age of Tree -- John L. Blue -- Tuesday, 8 September 2009, at 8:40 p.m.
  6 messages -- Newest posted Wednesday, 9 September 2009, at 5:57 p.m.
• A prayer for JK *PIC* -- Ellis Walentine -- Tuesday, 8 September 2009, at 8:54 p.m.
  15 messages -- Newest posted Friday, 11 September 2009, at 1:33 a.m.
• Driving by again *PIC* -- James Watriss -- Tuesday, 8 September 2009, at 9:49 p.m.
  5 messages -- Newest posted Tuesday, 8 September 2009, at 11:20 p.m.
• Saw Tooth pics - Adam? *LINK* -- paul womack -- Wednesday, 9 September 2009, at 3:52 a.m.
  3 messages -- Newest posted Wednesday, 9 September 2009, at 8:42 a.m.
• Plane finished *LINK* -- Stephen Shepherd in the State of Deseret -- Wednesday, 9 September 2009, at 6:02 p.m.
  27 messages -- Newest posted Friday, 11 September 2009, at 1:55 p.m.
• Krenov's passing -- Ellis Walentine -- Thursday, 10 September 2009, at 1:56 p.m.
  26 messages -- Newest posted Thursday, 17 September 2009, at 8:38 a.m.
• panel and smoother and a sad tale *PIC* -- wayne anderson -- Thursday, 10 September 2009, at 5:09 p.m.
  11 messages -- Newest posted Friday, 20 November 2009, at 2:02 a.m.
• need plans for a platform bed. -- Roy Anderson -- Thursday, 10 September 2009, at 9:59 p.m.
  1 message
• Ammonia fuming a chestnut bench base *PIC* -- John Aniano - in central NJ... -- Thursday, 10 September 2009, at 10:12 p.m.
  9 messages -- Newest posted Monday, 14 September 2009, at 9:45 p.m.
• A great man -- Bob in Green Bay -- Thursday, 10 September 2009, at 10:13 p.m.
  1 message
• Hi, my name is Bill and -- Bill Houghton, Sebastopol, CA -- Friday, 11 September 2009, at 4:13 p.m.
  9 messages -- Newest posted Monday, 14 September 2009, at 5:34 p.m.
• Progress on tray *PIC* -- Bill Tindall, E.TN -- Friday, 11 September 2009, at 7:41 p.m.
  7 messages -- Newest posted Tuesday, 15 September 2009, at 6:11 p.m.
• Seen it, but don't know what I'm looking for... -- Joe Pack -- Sunday, 13 September 2009, at 10:47 p.m.
  10 messages -- Newest posted Monday, 14 September 2009, at 4:04 p.m.
• Two Cherries Chisels -- Jerry Draper -- Monday, 14 September 2009, at 10:32 a.m.
  14 messages -- Newest posted Thursday, 17 September 2009, at 10:57 a.m.
• whatsit? *PIC* -- David Miller from Iowa -- Monday, 14 September 2009, at 3:23 p.m.
  7 messages -- Newest posted Thursday, 17 September 2009, at 2:10 p.m.
• The Making of a Steinway -- Pam Niedermayer, Austin, TX -- Monday, 14 September 2009, at 9:44 p.m.
  9 messages -- Newest posted Wednesday, 16 September 2009, at 5:16 p.m.
• Kent Hatchets -- Bill Houghton, Sebastopol, CA -- Monday, 14 September 2009, at 11:21 p.m.
  5 messages -- Newest posted Thursday, 17 September 2009, at 8:56 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 15 September 2009, at 7:33 a.m.
  1 message
• *** SURVEY: THE IDES OF SEPTEMBER *** *LINK* -- Ellis Walentine -- Tuesday, 15 September 2009, at 10:06 a.m.
  7 messages -- Newest posted Thursday, 17 September 2009, at 11:45 a.m.
• OT - latest project (a little rambly) *PIC* -- Bill Houghton, Sebastopol, CA -- Wednesday, 16 September 2009, at 1:59 a.m.
  21 messages -- Newest posted Sunday, 20 September 2009, at 8:21 p.m.
• Reading matter in the mail -- Bill Houghton, Sebastopol, CA -- Wednesday, 16 September 2009, at 5:23 p.m.
  8 messages -- Newest posted Monday, 21 September 2009, at 9:37 a.m.
• Strike Block / Miter Plane -- Stephen Shepherd in the State of Deseret -- Thursday, 17 September 2009, at 5:42 p.m.
  17 messages -- Newest posted Saturday, 19 September 2009, at 7:19 a.m.
• A Plane from Matjiesfontein *LINK* -- Derek Cohen (in Perth, Australia) -- Friday, 18 September 2009, at 3:30 p.m.
  9 messages -- Newest posted Tuesday, 22 September 2009, at 11:18 a.m.
• Mortise Chisels -- Gerry Mayberry -- Friday, 18 September 2009, at 3:31 p.m.
  28 messages -- Newest posted Tuesday, 22 September 2009, at 9:38 a.m.
• Trestle bench finished... *PIC* -- John Aniano - in Central NJ... -- Friday, 18 September 2009, at 11:19 p.m.
  18 messages -- Newest posted Thursday, 24 September 2009, at 7:12 a.m.
• Thoughts on resawing -- Craig - Western AK -- Saturday, 19 September 2009, at 1:01 a.m.
  13 messages -- Newest posted Monday, 21 September 2009, at 12:43 a.m.
• screw size to atttache door to case -- Bob in Green Bay -- Saturday, 19 September 2009, at 1:00 p.m.
  4 messages -- Newest posted Saturday, 19 September 2009, at 4:01 p.m.
• Tool cabinet Dehumidifier installed! -- Dominic in Buck's County PA -- Saturday, 19 September 2009, at 9:06 p.m.
  18 messages -- Newest posted Monday, 21 September 2009, at 5:26 p.m.
• Shelf-drilling jig *LINK* -- Bill Houghton, Sebastopol, CA -- Saturday, 19 September 2009, at 11:21 p.m.
  9 messages -- Newest posted Wednesday, 23 September 2009, at 12:19 p.m.
• Down the dark (and expensive!) path -- Bob Pierce -- Sunday, 20 September 2009, at 1:17 a.m.
  16 messages -- Newest posted Tuesday, 22 September 2009, at 6:35 p.m.
• Port Townsend Woodworking School -- Bob Pierce -- Sunday, 20 September 2009, at 1:37 a.m.
  8 messages -- Newest posted Wednesday, 23 September 2009, at 6:24 p.m.
• Catalog cover question for Rob Lee -- Bill Houghton, Sebastopol, CA -- Sunday, 20 September 2009, at 12:35 p.m.
  15 messages -- Newest posted Wednesday, 23 September 2009, at 1:34 a.m.
• Not really a woodworking tool but... -- Stephen Shepherd in the State of Deseret -- Sunday, 20 September 2009, at 7:46 p.m.
  3 messages -- Newest posted Monday, 21 September 2009, at 9:36 a.m.
• sanding shellac -- Bob in Green Bay -- Sunday, 20 September 2009, at 9:42 p.m.
  13 messages -- Newest posted Monday, 21 September 2009, at 1:09 p.m.
• Handsaw Sharpening Service? -- Tony - Memphis -- Monday, 21 September 2009, at 2:46 p.m.
  5 messages -- Newest posted Tuesday, 22 September 2009, at 7:58 p.m.
• "Foreign Made" chisels Mystique -- charlie belden -- Monday, 21 September 2009, at 5:01 p.m.
  33 messages -- Newest posted Wednesday, 23 September 2009, at 12:13 p.m.
• Best salesperson I've encountered in a long time -- Bruce, a MN Galoot -- Monday, 21 September 2009, at 6:27 p.m.
  5 messages -- Newest posted Monday, 21 September 2009, at 11:23 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 22 September 2009, at 7:39 a.m.
  1 message
• Veritas plane in the classifieds *NM* -- Steve Kubien -- Tuesday, 22 September 2009, at 2:15 p.m.
  1 message
• custom engraving hand tools *PIC* -- Catharine Kennedy -- Wednesday, 23 September 2009, at 9:24 a.m.
  19 messages -- Newest posted Thursday, 24 September 2009, at 1:50 a.m.
• New saw vise at TFWW *LINK* -- wilbur -- Wednesday, 23 September 2009, at 4:35 p.m.
  110 messages -- Newest posted Thursday, 1 October 2009, at 2:26 a.m.
• Seat weaving references/instructions? -- Chuck Nickerson -- Wednesday, 23 September 2009, at 5:49 p.m.
  3 messages -- Newest posted Thursday, 24 September 2009, at 12:18 p.m.
• what is the angle to sharpen a frow -- Wayne Carson -- Wednesday, 23 September 2009, at 11:24 p.m.
  8 messages -- Newest posted Friday, 25 September 2009, at 5:02 p.m.
• Question About Hardened Steel -- Tom Colligan -- Thursday, 24 September 2009, at 9:26 p.m.
  5 messages -- Newest posted Friday, 25 September 2009, at 9:36 a.m.
• Deep end grain drilling? -- Joe Pack -- Thursday, 24 September 2009, at 9:35 p.m.
  5 messages -- Newest posted Thursday, 24 September 2009, at 11:22 p.m.
• Evenfall shooting board with Japanese planes -- wilbur -- Friday, 25 September 2009, at 12:02 a.m.
  42 messages -- Newest posted Wednesday, 30 September 2009, at 1:31 p.m.
• To store or not to store, that is the question. -- Roy Anderson -- Friday, 25 September 2009, at 8:31 a.m.
  14 messages -- Newest posted Friday, 25 September 2009, at 6:06 p.m.
• Up against the wall, woodworker! -- Roy Anderson -- Saturday, 26 September 2009, at 7:01 a.m.
  15 messages -- Newest posted Monday, 28 September 2009, at 11:46 a.m.
• Sniping on ebay -- Neal in San Jose -- Saturday, 26 September 2009, at 12:55 p.m.
  18 messages -- Newest posted Tuesday, 29 September 2009, at 12:58 p.m.
• New Benefit Auction -- Wiley Horne--So. Calif. -- Sunday, 27 September 2009, at 12:20 a.m.
  1 message
• What Eggbeater is This? 1 of 2 *PIC* -- David Miller from Iowa -- Monday, 28 September 2009, at 7:03 p.m.
  6 messages -- Newest posted Thursday, 1 October 2009, at 3:47 a.m.
• Workshop crisis #1207 *PIC* *LINK* -- Derek Cohen (in Perth, Australia) -- Tuesday, 29 September 2009, at 2:28 a.m.
  35 messages -- Newest posted Thursday, 1 October 2009, at 2:43 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 29 September 2009, at 8:43 a.m.
  1 message
• [AD]Advanced Marquetry Class - Paul Schurch *LINK* -- Ellis Walentine -- Tuesday, 29 September 2009, at 1:01 p.m.
  1 message
• Anybody ever use one of these blades? *LINK* -- Scott Burr in Ben Lomond CA -- Tuesday, 29 September 2009, at 5:47 p.m.
  42 messages -- Newest posted Sunday, 4 October 2009, at 3:42 p.m.
• Swedish chisels - Esteel and Eskilstuna Berg -- amelon -- Tuesday, 29 September 2009, at 10:13 p.m.
  9 messages -- Newest posted Saturday, 3 October 2009, at 11:20 a.m.
• NCIS -- R.J.Whelan - Sierras, California -- Wednesday, 30 September 2009, at 11:40 a.m.
  11 messages -- Newest posted Thursday, 1 October 2009, at 4:06 p.m.
• How to buy planes at auction (long) -- Mark in Texas -- Wednesday, 30 September 2009, at 8:31 p.m.
  11 messages -- Newest posted Thursday, 1 October 2009, at 1:44 p.m.
• plane engraving -- Catharine Kennedy -- Thursday, 1 October 2009, at 7:20 a.m.
  5 messages -- Newest posted Thursday, 8 October 2009, at 5:09 p.m.
• ***SPECIAL GUEST CHAT - PAUL SCHÜRCH*** *LINK* -- Ellis Walentine -- Thursday, 1 October 2009, at 8:00 a.m.
  1 message
• New Benefit Auction *LINK* -- Bill Houghton, Sebastopol, CA -- Thursday, 1 October 2009, at 5:46 p.m.
  2 messages -- Newest posted Thursday, 1 October 2009, at 10:49 p.m.
• Coccobolo and Brass Marking Gauges -- Dominic in Buck's County PA -- Thursday, 1 October 2009, at 7:40 p.m.
  14 messages -- Newest posted Monday, 5 October 2009, at 12:55 p.m.
• Shopping in Japan? -- Denis Chénard, Orléans, Ont. -- Friday, 2 October 2009, at 10:48 a.m.
  14 messages -- Newest posted Monday, 5 October 2009, at 6:16 a.m.
• OT Cell phones. -- Scott Burr in Ben Lomond CA -- Friday, 2 October 2009, at 7:03 p.m.
  43 messages -- Newest posted Wednesday, 14 October 2009, at 11:45 a.m.
• #5 type 11 corugated sole -- Randy Johnson Connersville IN -- Saturday, 3 October 2009, at 8:24 a.m.
  7 messages -- Newest posted Sunday, 4 October 2009, at 11:02 p.m.
• How to buy planes at auction (long) -- Mark in Texas -- Saturday, 3 October 2009, at 12:44 p.m.
  1 message
• **Dispatch from Valley Forge** -- Ellis Walentine -- Sunday, 4 October 2009, at 7:19 a.m.
  23 messages -- Newest posted Wednesday, 7 October 2009, at 1:42 a.m.
• Gramercy saw vise redux -- wilbur -- Sunday, 4 October 2009, at 3:14 p.m.
  1 message
• I show Toshio Odate my Japanese plane, and lived! -- wilbur -- Sunday, 4 October 2009, at 11:56 p.m.
  6 messages -- Newest posted Monday, 5 October 2009, at 12:25 p.m.
• ***Guest Chat Tonight*** *LINK* -- Ellis Walentine -- Monday, 5 October 2009, at 8:25 a.m.
  1 message
• Some pictures and tool pr0n from WIA -- wilbur -- Tuesday, 6 October 2009, at 7:21 a.m.
  2 messages -- Newest posted Tuesday, 6 October 2009, at 8:12 p.m.
• [AD] Klingspor Sale Thru October 19! -- Ellis Walentine -- Tuesday, 6 October 2009, at 9:58 a.m.
  1 message
• tool till *PIC* -- Catharine Kennedy -- Tuesday, 6 October 2009, at 10:13 a.m.
  24 messages -- Newest posted Thursday, 8 October 2009, at 2:02 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 6 October 2009, at 10:20 a.m.
  1 message
• paging Scott Burr... -- James Watriss -- Tuesday, 6 October 2009, at 4:07 p.m.
  3 messages -- Newest posted Tuesday, 6 October 2009, at 8:15 p.m.
• WIA and Blog Entry -- Andrew Lunn -- Tuesday, 6 October 2009, at 8:52 p.m.
  5 messages -- Newest posted Thursday, 8 October 2009, at 8:54 p.m.
• Doh! Murphy strikes again -- Edward in Vancouver -- Wednesday, 7 October 2009, at 12:55 a.m.
  24 messages -- Newest posted Saturday, 10 October 2009, at 9:28 a.m.
• Use of Wood Gouges for Turning -- Roy Girolami------WebKitFormBoundary9yANUT8mn8C+Zo -- Wednesday, 7 October 2009, at 7:45 p.m.
  15 messages -- Newest posted Saturday, 10 October 2009, at 2:22 p.m.
• rebuilt batteries -- Tom near Sacramento -- Wednesday, 7 October 2009, at 8:29 p.m.
  6 messages -- Newest posted Saturday, 10 October 2009, at 8:48 a.m.
• Dumb question--screwdrivers -- Wiley Horne--So. Calif. -- Friday, 9 October 2009, at 12:19 a.m.
  36 messages -- Newest posted Tuesday, 13 October 2009, at 9:35 a.m.
• Ruler backing . . . -- steve mackay -- Sunday, 11 October 2009, at 3:32 p.m.
  3 messages -- Newest posted Sunday, 11 October 2009, at 7:56 p.m.
• Does anyone know when... *LINK* -- Stephen Shepherd in the State of Deseret -- Sunday, 11 October 2009, at 5:48 p.m.
  4 messages -- Newest posted Saturday, 17 October 2009, at 12:45 p.m.
• Sargent Low Angle Plane? -- Dave Thompson -- Sunday, 11 October 2009, at 9:44 p.m.
  6 messages -- Newest posted Thursday, 15 October 2009, at 1:38 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 13 October 2009, at 11:18 a.m.
  1 message
• ***NEW BOOKSTORE*** *LINK* -- Ellis Walentine -- Tuesday, 13 October 2009, at 1:43 p.m.
  2 messages -- Newest posted Tuesday, 13 October 2009, at 8:48 p.m.
• CAPTION CONTEST WINNER! -- Ellis Walentine -- Wednesday, 14 October 2009, at 1:03 p.m.
  1 message
• Hand tools for sale -- Cecil Nickerson -- Wednesday, 14 October 2009, at 2:12 p.m.
  1 message
• OT - here's one for Todd Hughes -- Bill Houghton, Sebastopol, CA -- Wednesday, 14 October 2009, at 5:59 p.m.
  8 messages -- Newest posted Thursday, 15 October 2009, at 1:59 p.m.
• IBC Replacement Plane Blades *LINK* -- David Cockey -- Wednesday, 14 October 2009, at 11:34 p.m.
  2 messages -- Newest posted Thursday, 15 October 2009, at 1:30 a.m.
• Popular Mechanics *LINK* -- Kevin French Antrim, NH -- Thursday, 15 October 2009, at 10:37 a.m.
  3 messages -- Newest posted Friday, 16 October 2009, at 3:29 a.m.
• Local sawyer in Buck's County PA: source for red o -- Dominic in Bucks County PA -- Thursday, 15 October 2009, at 2:31 p.m.
  8 messages -- Newest posted Friday, 16 October 2009, at 9:58 p.m.
• Question about a book purchase -- Mike in Suffolk Virginia -- Friday, 16 October 2009, at 10:57 a.m.
  3 messages -- Newest posted Saturday, 17 October 2009, at 11:28 a.m.
• Best way to get light rust off steel -- Wiley Horne--So. Calif. -- Friday, 16 October 2009, at 9:04 p.m.
  25 messages -- Newest posted Monday, 19 October 2009, at 9:31 p.m.
• A tale of two miter planes -- Craig D -- Saturday, 17 October 2009, at 2:42 a.m.
  10 messages -- Newest posted Monday, 19 October 2009, at 4:53 p.m.
• cock beading drawers -- Catharine Kennedy -- Saturday, 17 October 2009, at 6:27 p.m.
  28 messages -- Newest posted Wednesday, 21 October 2009, at 1:52 a.m.
• Trade practice for cutting dadoes? -- wilbur -- Saturday, 17 October 2009, at 8:35 p.m.
  50 messages -- Newest posted Thursday, 22 October 2009, at 7:11 a.m.
• A Primer for Handcut Mortice-and-Tenon Joints *LINK* -- Derek Cohen (in Perth, Australia) -- Saturday, 17 October 2009, at 8:40 p.m.
  8 messages -- Newest posted Monday, 19 October 2009, at 11:06 p.m.
• A tale ALMOST worthy of Todd -- Neal in San Jose -- Sunday, 18 October 2009, at 8:47 p.m.
  2 messages -- Newest posted Monday, 19 October 2009, at 9:47 a.m.
• Dado plane video clip -- Catharine Kennedy -- Monday, 19 October 2009, at 6:31 a.m.
  16 messages -- Newest posted Wednesday, 21 October 2009, at 5:08 p.m.
• Why do we do it? -- Bob Hackett -- Monday, 19 October 2009, at 4:53 p.m.
  28 messages -- Newest posted Thursday, 22 October 2009, at 7:05 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 20 October 2009, at 11:57 a.m.
  1 message
• video of New Rodger's jig saw *LINK* -- Catharine Kennedy -- Tuesday, 20 October 2009, at 12:07 p.m.
  4 messages -- Newest posted Saturday, 24 October 2009, at 12:04 a.m.
• Shop Shots *LINK* -- Catharine Kennedy -- Tuesday, 20 October 2009, at 12:09 p.m.
  6 messages -- Newest posted Tuesday, 20 October 2009, at 10:33 p.m.
• construction question for Warren and others -- Bill Tindall, E.TN -- Tuesday, 20 October 2009, at 1:11 p.m.
  10 messages -- Newest posted Wednesday, 21 October 2009, at 11:15 p.m.
• Joinery question -- Dan Donaldson -- Tuesday, 20 October 2009, at 5:27 p.m.
  16 messages -- Newest posted Friday, 23 October 2009, at 1:04 p.m.
• Mixing a wipe on Shellac finish -- Dominic in Buck's County PA -- Tuesday, 20 October 2009, at 6:32 p.m.
  12 messages -- Newest posted Thursday, 22 October 2009, at 4:06 p.m.
• OT - hand tools to the rescue again! -- Bill Houghton, Sebastopol, CA -- Tuesday, 20 October 2009, at 11:04 p.m.
  2 messages -- Newest posted Wednesday, 21 October 2009, at 1:59 a.m.
• Hinge question -- Edward in Vancouver -- Wednesday, 21 October 2009, at 12:35 a.m.
  7 messages -- Newest posted Wednesday, 21 October 2009, at 11:02 p.m.
• Folding Rule -- Al -- Wednesday, 21 October 2009, at 10:50 a.m.
  9 messages -- Newest posted Friday, 30 October 2009, at 10:22 p.m.
• The history of saws *LINK* -- Bob Demers -- Wednesday, 21 October 2009, at 10:00 p.m.
  11 messages -- Newest posted Friday, 23 October 2009, at 8:35 a.m.
• Lewis & Clark carried a tape measure -- Stephen Shepherd in the State of Deseret -- Thursday, 22 October 2009, at 11:11 a.m.
  19 messages -- Newest posted Friday, 23 October 2009, at 10:45 p.m.
• [AD] Stephen's new book is out! *LINK* *PIC* -- Ellis Walentine -- Thursday, 22 October 2009, at 3:32 p.m.
  2 messages -- Newest posted Monday, 26 October 2009, at 3:25 p.m.
• OT for Todd. He might like this *LINK* -- Dan Donaldson -- Thursday, 22 October 2009, at 11:18 p.m.
  2 messages -- Newest posted Friday, 23 October 2009, at 4:05 a.m.
• Rhythm Hand Planes? -- Tom MacGregor -- Friday, 23 October 2009, at 6:22 a.m.
  4 messages -- Newest posted Sunday, 25 October 2009, at 8:04 a.m.
• Brown Tool Auction -- Bart Goldberg -- Friday, 23 October 2009, at 8:42 a.m.
  1 message
• WoodCentral's 11th Anniversary is today! *PIC* -- Ellis Walentine -- Friday, 23 October 2009, at 10:38 a.m.
  12 messages -- Newest posted Saturday, 24 October 2009, at 6:51 a.m.
• Table Plans -- Jerry Draper -- Friday, 23 October 2009, at 10:48 a.m.
  4 messages -- Newest posted Friday, 23 October 2009, at 9:40 p.m.
• faux finishing video *LINK* -- Catharine Kennedy -- Friday, 23 October 2009, at 4:58 p.m.
  15 messages -- Newest posted Sunday, 25 October 2009, at 9:48 p.m.
• Shellac storage results -- Denny -- Friday, 23 October 2009, at 6:23 p.m.
  1 message
• Workmanship of Risk vs Workmanship of Certainty -- charlie belden -- Saturday, 24 October 2009, at 3:14 p.m.
  13 messages -- Newest posted Wednesday, 28 October 2009, at 5:05 p.m.
• Stanley No. 39 parts -- Bill Houghton, Sebastopol, CA -- Saturday, 24 October 2009, at 8:45 p.m.
  8 messages -- Newest posted Monday, 26 October 2009, at 7:02 a.m.
• OT - checking purchases -- Bill Houghton, Sebastopol, CA -- Saturday, 24 October 2009, at 9:36 p.m.
  8 messages -- Newest posted Sunday, 25 October 2009, at 2:52 p.m.
• Saw carrier/tool box for Japanese saws? -- Wiley Horne--So. Calif. -- Sunday, 25 October 2009, at 7:54 p.m.
  60 messages -- Newest posted Friday, 30 October 2009, at 10:49 p.m.
• Arts and Crafts style clock insert -- Patrick Wheatley -- Monday, 26 October 2009, at 10:35 a.m.
  13 messages -- Newest posted Thursday, 29 October 2009, at 3:30 p.m.
• Spalted Dogwood -- Hank Knight -- Monday, 26 October 2009, at 12:10 p.m.
  6 messages -- Newest posted Monday, 26 October 2009, at 3:00 p.m.
• I hate when this happens -- Neal in San Jose -- Monday, 26 October 2009, at 1:50 p.m.
  12 messages -- Newest posted Wednesday, 28 October 2009, at 7:29 p.m.
• LOVE those Japanese super stones! -- Dominic in Buck's County PA -- Monday, 26 October 2009, at 9:15 p.m.
  10 messages -- Newest posted Friday, 30 October 2009, at 6:23 p.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 27 October 2009, at 12:37 p.m.
  1 message
• Using shellac in cold weather? -- Denis Chénard, Orléans, Ont. -- Tuesday, 27 October 2009, at 12:48 p.m.
  13 messages -- Newest posted Wednesday, 28 October 2009, at 10:01 p.m.
• sharpening profile scrapers -- Bill Tindall, E.TN -- Tuesday, 27 October 2009, at 6:08 p.m.
  10 messages -- Newest posted Thursday, 29 October 2009, at 10:27 a.m.
• Cleaning heavy grime--what to do? -- Wiley Horne--So. Calif. -- Wednesday, 28 October 2009, at 12:55 a.m.
  18 messages -- Newest posted Thursday, 29 October 2009, at 4:16 p.m.
• ryoba question -- Bruce, a MN Galoot -- Wednesday, 28 October 2009, at 3:46 p.m.
  21 messages -- Newest posted Friday, 30 October 2009, at 4:55 p.m.
• Disinfecting tools -- Rob in Ontario -- Wednesday, 28 October 2009, at 7:08 p.m.
  19 messages -- Newest posted Sunday, 1 November 2009, at 12:53 a.m.
• Shop Built Saw Vise (long) -- Dominic in Buck's County PA -- Wednesday, 28 October 2009, at 7:57 p.m.
  34 messages -- Newest posted Friday, 30 October 2009, at 6:17 p.m.
• Folding rules, backwards -- link van cleave -- Wednesday, 28 October 2009, at 10:57 p.m.
  22 messages -- Newest posted Friday, 6 November 2009, at 12:42 a.m.
• buffing wheels -- Catharine C. Kennedy -- Thursday, 29 October 2009, at 1:41 p.m.
  6 messages -- Newest posted Friday, 30 October 2009, at 1:03 p.m.
• It's a small world after all *LINK* -- Wiley Horne--So. Calif. -- Friday, 30 October 2009, at 12:37 a.m.
  27 messages -- Newest posted Monday, 2 November 2009, at 8:52 p.m.
• Just got it, thanks Cecil! -- Edward in Vancouver -- Friday, 30 October 2009, at 12:50 a.m.
  1 message
• Cost vs. utility *LINK* -- Ellis Walentine -- Friday, 30 October 2009, at 4:47 a.m.
  28 messages -- Newest posted Monday, 2 November 2009, at 9:28 a.m.
• Cherry for Chisel handles? -- Al -- Friday, 30 October 2009, at 12:01 p.m.
  7 messages -- Newest posted Saturday, 31 October 2009, at 12:06 a.m.
• WoodCentral Secret Santa signups -- Pat Riley -- Friday, 30 October 2009, at 6:06 p.m.
  3 messages -- Newest posted Monday, 2 November 2009, at 2:59 p.m.
• Name Stamps? -- Edward in Vancouver -- Saturday, 31 October 2009, at 12:36 a.m.
  6 messages -- Newest posted Monday, 2 November 2009, at 11:41 a.m.
• Major issue of our time *LINK* -- Wiley Horne--So. Calif. -- Saturday, 31 October 2009, at 3:04 p.m.
  25 messages -- Newest posted Monday, 2 November 2009, at 3:15 p.m.
• Tip for transfering dovetails marks *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 1 November 2009, at 10:18 a.m.
  1 message
• LV Pocket Marking Gauge *PIC* -- Derek Cohen (in Perth, Australia) -- Sunday, 1 November 2009, at 10:27 a.m.
  23 messages -- Newest posted Wednesday, 4 November 2009, at 8:36 p.m.
• What we do for love .. and dovetails *PIC* -- Derek Cohen (in Perth, Australia) -- Monday, 2 November 2009, at 8:50 a.m.
  14 messages -- Newest posted Wednesday, 4 November 2009, at 12:31 p.m.
• Gripping the Stanley 39 *LINK* -- Bill Houghton, Sebastopol, CA -- Monday, 2 November 2009, at 11:05 p.m.
  1 message
• Tuesday Night Hand Tool Chat -- Stephen Shepherd in the State of Deseret -- Tuesday, 3 November 2009, at 8:28 a.m.
  1 message
• Interesting old handsaw vise on Ebay *LINK* -- Marv -- Tuesday, 3 November 2009, at 12:28 p.m.
  13 messages -- Newest posted Wednesday, 4 November 2009, at 11:30 a.m.
• Pretty good deal . . . *PIC* -- steve mackay -- Tuesday, 3 November 2009, at 2:38 p.m.
  1 message
• Updated handtool list - Classifieds *NM* -- Cecil Nickerson -- Tuesday, 3 November 2009, at 10:40 p.m.
  1 message
• New shop evolution + making window moldings... -- John Aniano - in central NJ... -- Wednesday, 4 November 2009, at 10:42 a.m.
  10 messages -- Newest posted Thursday, 5 November 2009, at 2:04 p.m.
• Saw Set Till *PIC* -- David Miller from Iowa -- Thursday, 5 November 2009, at 8:45 a.m.
  7 messages -- Newest posted Friday, 6 November 2009, at 3:21 p.m.
• 1882 Miller Patent Plough Plane Kit *PIC* *LINK* -- Derek Cohen (in Perth, Australia) -- Saturday, 7 November 2009, at 8:33 a.m.
  18 messages -- Newest posted Tuesday, 10 November 2009, at 9:03 a.m.
• Minor modifications to Veritas twin screw vise... -- James Watriss -- Saturday, 7 November 2009, at 7:28 p.m.
  17 messages -- Newest posted Wednesday, 11 November 2009, at 4:39 p.m.
• A few quick updates -- Pat Riley -- Sunday, 8 November 2009, at 9:24 p.m.
  1 message
• More Flat Reading Folding Rules -- Jay Samuels -- Monday, 9 November 2009, at 10:05 a.m.
  1 message
• A question for the historians -- Phil Joines Krum,Tx -- Monday, 9 November 2009, at 9:42 p.m.
  8 messages -- Newest posted Friday, 13 November 2009, at 11:38 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd -- Tuesday, 10 November 2009, at 8:32 a.m.
  1 message
• NEW Shop Shot - #914 -- David Yoho -- Tuesday, 10 November 2009, at 9:38 a.m.
  1 message
• This ought to be interesting: bench plane vs. ROS *LINK* -- wilbur -- Tuesday, 10 November 2009, at 9:58 a.m.
  25 messages -- Newest posted Friday, 13 November 2009, at 11:54 a.m.
• Are hand planed or sanded surfaces best -- Bill Tindall, E.TN -- Wednesday, 11 November 2009, at 5:55 p.m.
  33 messages -- Newest posted Wednesday, 18 November 2009, at 8:30 p.m.
• Has anyone been to Hancock Shaker Village? -- Patrick Gibbons, Katy, TX -- Wednesday, 11 November 2009, at 7:40 p.m.
  11 messages -- Newest posted Thursday, 12 November 2009, at 11:09 p.m.
• Old hand Plane-need advice *PIC* -- Jennifer@Indy.USA -- Wednesday, 11 November 2009, at 7:50 p.m.
  16 messages -- Newest posted Monday, 16 November 2009, at 7:52 p.m.
• Can't resist - eBay *LINK* -- Bill Houghton, Sebastopol, CA -- Wednesday, 11 November 2009, at 10:01 p.m.
  8 messages -- Newest posted Thursday, 12 November 2009, at 4:15 p.m.
• Micro Rebate plane. -- ThomD -- Thursday, 12 November 2009, at 4:26 p.m.
  4 messages -- Newest posted Friday, 13 November 2009, at 9:29 p.m.
• Talesin Lamp wiring -- ThomD -- Thursday, 12 November 2009, at 4:46 p.m.
  3 messages -- Newest posted Friday, 13 November 2009, at 7:21 p.m.
• Cherubini's Blog -- Al -- Thursday, 12 November 2009, at 4:55 p.m.
  4 messages -- Newest posted Friday, 13 November 2009, at 3:48 p.m.
• Spiers gloat *LINK* -- woodburnbob -- Thursday, 12 November 2009, at 7:16 p.m.
  14 messages -- Newest posted Monday, 16 November 2009, at 1:17 p.m.
• Stanley Repro No. 50 Last call...eBay auction. *LINK* -- Marv -- Thursday, 12 November 2009, at 7:19 p.m.
  3 messages -- Newest posted Friday, 13 November 2009, at 11:01 a.m.
• Secret Santa - last call -- Pat Riley -- Friday, 13 November 2009, at 7:53 p.m.
  1 message
• In market for tenon saw, but . . . questions -- Nathan -- Saturday, 14 November 2009, at 3:06 a.m.
  42 messages -- Newest posted Monday, 16 November 2009, at 7:22 p.m.
• Tiger Oak Finish? -- David Miller from Iowa -- Saturday, 14 November 2009, at 11:37 a.m.
  7 messages -- Newest posted Wednesday, 18 November 2009, at 4:44 p.m.
• Weekend accomplishments -- Stuart Hough -- Sunday, 15 November 2009, at 4:30 p.m.
  5 messages -- Newest posted Monday, 16 November 2009, at 10:39 a.m.
• Finish Inside of Blanket Chest? -- Ron in Sterling, CT -- Sunday, 15 November 2009, at 6:10 p.m.
  21 messages -- Newest posted Thursday, 19 November 2009, at 2:00 a.m.
• OT: Cool way to help out a fellow woodworker -- Frank D. in Montreal -- Sunday, 15 November 2009, at 11:28 p.m.
  2 messages -- Newest posted Tuesday, 17 November 2009, at 7:42 a.m.
• NEW Shop Shots - 915 and 916 -- David Yoho -- Monday, 16 November 2009, at 8:25 a.m.
  1 message
• Alan Peters obituary from "The Economist" *LINK* -- Nathan -- Tuesday, 17 November 2009, at 4:37 a.m.
  5 messages -- Newest posted Thursday, 19 November 2009, at 8:25 a.m.
• Tuesday Night Hand Tool Chat -- Stephen Shepherd -- Tuesday, 17 November 2009, at 10:17 a.m.
  1 message
• Bessey Clamps for sale in Classifieds! *NM* -- Jennifer@Indy.USA -- Tuesday, 17 November 2009, at 10:26 a.m.
  2 messages -- Newest posted Tuesday, 17 November 2009, at 8:37 p.m.
• How to- dovetail miter -- Bill Tindall, E.TN -- Tuesday, 17 November 2009, at 2:03 p.m.
  5 messages -- Newest posted Wednesday, 18 November 2009, at 12:52 p.m.
• "Woodwork" Special Edition out *LINK* -- Bill Houghton, Sebastopol, CA -- Tuesday, 17 November 2009, at 4:38 p.m.
  14 messages -- Newest posted Friday, 20 November 2009, at 8:24 p.m.
• Kenyon panel saw handle pattern? -- John Aniano, in NJ... -- Tuesday, 17 November 2009, at 10:49 p.m.
  2 messages -- Newest posted Tuesday, 17 November 2009, at 10:52 p.m.
• tapered reamer -- Bruce, a MN Galoot -- Wednesday, 18 November 2009, at 2:36 a.m.
  17 messages -- Newest posted Friday, 20 November 2009, at 7:41 p.m.
• Krenov wall cabinet question -- Wiley Horne--So. Calif. -- Wednesday, 18 November 2009, at 3:54 p.m.
  29 messages -- Newest posted Friday, 20 November 2009, at 1:33 a.m.
• Old planes and stuff I think about.... *LINK* -- Wiley Horne--So. Calif. -- Wednesday, 18 November 2009, at 4:36 p.m.
  11 messages -- Newest posted Friday, 20 November 2009, at 7:10 p.m.
• Speakin' of Planes.... -- John L Blue -- Wednesday, 18 November 2009, at 9:06 p.m.
  11 messages -- Newest posted Friday, 20 November 2009, at 4:19 a.m.
• Quick question on flitch cut logs -- wilbur -- Thursday, 19 November 2009, at 9:45 a.m.
  14 messages -- Newest posted Thursday, 19 November 2009, at 8:32 p.m.
• apple drying question -- Bruce, a MN Galoot -- Thursday, 19 November 2009, at 1:43 p.m.
  15 messages -- Newest posted Friday, 20 November 2009, at 8:22 p.m.
• New (?) plane from Lee Valley *LINK* -- Stephen Shepherd -- Thursday, 19 November 2009, at 8:16 p.m.
  6 messages -- Newest posted Friday, 20 November 2009, at 2:32 p.m.
• Egg Braters revisited -- Bill Tindall, E.TN -- Friday, 20 November 2009, at 8:26 a.m.
  10 messages -- Newest posted Friday, 20 November 2009, at 7:52 p.m.
• Helping to confuse a comrade *LINK* -- Bill Houghton, Sebastopol, CA -- Friday, 20 November 2009, at 12:05 p.m.
  1 message
• Best finish for a cane? -- Ed Snow -- Friday, 20 November 2009, at 7:13 p.m.
  1 message

Post New Message      Search Current Messages      Set Preferences      Top 10      View User Profiles      Create Profile       Message Archives      Messageboard FAQs      SPAM PATROL      MODERATORS: Wiley Horne & Bill Houghton

Hand Tools is maintained by Ellis Walentine with WebBBS 5.12.