Re: OT-35MM Slides to PC
Gary Smyth
For those that need quality scans send them out. If the place is truly good it will take the reversal film out of its mount, wet clean the film (this also fills minor scratches), vacuum mount the film/glass press so that the scan scans film that is perfectly flat, records a full 24mm x 36mm image, and electronically color corrects. Importantly, the color temperature of the backlight will be adjustable and vary from 5500 degrees Kelvin to 5778 degrees Kelvin (sunlight is generally accepted as 5778 degrees Kelvin, film is calibrated for 5500 degrees Kelvin). The pixel numbers of these scans can exceed the grain of the film � not necessarily a good thing. They will then remount the slide film. If done the �right� way, you will pay the same as a good color print each. That is multiple dollars each.
That said, for internet use, a 35mm reversal film to electronic image doesn�t have to use a camera with more than 4.0 megapixels and some as low as 1.5 megapixels, mostly dependent on if the camera has a glass not plastic lens. You can use more pixels, but very, very, few viewers will recognize the difference on a computer screen. Remember, there are pictures and there is photographic art. They are not one in the same thing. Smyth�s theory: Presentation form is inversely proportional to the audiences need to know.
For most of us the best alternative, cheapest, and fastest transfers come from shooting the slide in a locked down position as flat and parallel to the camera lens as possible, in macro, no zoom, with a locked down still camera shooting full frame with a light source that approximates daylight at 5500 degrees Kelvin. Bill�s example is a great example. (I especially like the semicircular reflective board) Another method if the color temperature of the light is right is to use an old movie trick of crumpled up foil. The foil crumples make facets that when straightened out and facing the light source bounce light all over the area and shadows are cancelled out. Aluminum foil also won�t catch fire as paper occasionally will with hot studio lights. Then by using Picasa (free, online) or other photo manipulation software you can crop and do some minor work coming out of the camera. Once satisfied, move the picture directly to an explorer picture file. Time savings is that you can shot a whole mess of shots in the camera and adjust later. Anything that doesn�t meet your standards you can still send out.



