Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

scrolling in brass

Posts

scrolling in brass

#1

scrolling in brass

McKay

I would like to make some asian styled plates. I would like to make my own rather than purchase the hardware. Has anyone scrolled brass before? If so, what blades can you use? Are you able to use regular scroll saw blades? Thanks in advance.

Re: scrolling in brass

#2

Re: scrolling in brass

Phil Joines

Regular blades work fine for brass, copper, aluminum, etc. If the stock is thin you'll want a high tooth count and maybe back it up with some thin ply.

Re: scrolling in brass

#3

Re: scrolling in brass

john lucas

I use the regular blades but I sandwich the brass between 2 layers of wood. It cuts cleaner and doesn't break the blades as often.

Re: scrolling in brass

#4

lube with wax

Robin Corell in Atascadero CA

Regular blade, and I lube it by cutting a bit of bees wax every so often. It will cut without the wax but the blade lasts longer if it is lubed.

Robin

Re: scrolling in brass

#5

Jeweler's saw blades, lube with beeswax

Bill Earl

Re: scrolling in brass

#6

Clint Searl

Re: scrolling in brass

Clint Searl

1/8" sheet brass cuts like butter with a 10 TPI 1/8" blade on a bandsaw.

Clint