Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Little off topic, tarnishing bronze?

Posts

Little off topic, tarnishing bronze?

#1

Little off topic, tarnishing bronze?

Keith Newton----Little Rock, Arkansas

Built a arched top QS screen door for a friend, which is stained dark oak.

I picked up some bronze screen to put in it, but it is a lot shiner than I would like. Assuming that it doesn't have some kind of coating, what would good to try to age it quickly?

Or how long should it take to tarnish on its own?

Re: Little off topic, tarnishing bronze?

#2

JL

Re: Little off topic, tarnishing bronze?

JL

Dilute vinegar - but as you live in a city - I would wait and see. The air pollution that you might have will probably tarnish your stuff relatively quickly.

Re: Little off topic, tarnishing bronze?

#3

Re: Little off topic, tarnishing bronze?

roger lance

Keith....for antiquing brass, i've been using a product called Brass Black that i get at a local gun/shooting club....it's suppose to give an aged look to other metals as well....hope this helps.

Re: Little off topic, tarnishing bronze?

#4

Clint Searl

Liver of sulfur (Potassium sulfide)

Clint Searl

Re: Little off topic, tarnishing bronze?

#5

Hum, I tried that,

Keith Newton----Little Rock, Arkansas

and while waiting for it to work, found this. "Vinegar can be used for polishing brass or bronze". So it looks like maybe I should try alkali.

Although, as I am getting it in, it looks better than I though it would, so leaving it alone is becoming more appealing.

Re: Little off topic, tarnishing bronze?

#6

Do a small sample first, but I use

Gary Smyth

household ammonia. Only takes a day, or less, but it isn't reversible so test first. The color varies from brownish yellow to whiteish green depnding on bronze and ammonia concentration/time.

Re: Little off topic, tarnishing bronze?

#7

You Don't Want To Tarnish Your Reputation

George@Colonel's Workshop-Havertown PA

Re: Little off topic, tarnishing bronze?

#8

Several things to try...

John in NM

I've used brass black on brass and liver of sulfur on silver alloys. Liver of sulfur makes a copper sulfide coating (there's copper in most silver to make it harder), but it didn't seem to work with brass, so I bought the brass black. You can supposedly use water that's had eggs boiled in it, but I was never patient enough to try that, it'd be a weak solution.

Ammonia dissolves copper, making a really nice blue solution. It should work, but be careful, dilute it a bit and test a lot. Might be a good one to try fuming, like some do with oak.

I think I'd try some salt water too. Try fuming with this one too, I don't think I'd try immersion.

Acids like vinegar will likely just remove whatever oxides have already formed on the surface.

Re: Little off topic, tarnishing bronze?

#9

True, wouldn't want to seem so dull 

John in NM

Re: Little off topic, tarnishing bronze?

#10

Not To Mention Off-Color

Mark Mandell - Gone Round In Jersey

Re: Little off topic, tarnishing bronze?

#11

Speaking of Color *LINK*

Mark Mandell - Gone Round In Jersey

The formulas for a rainbow of colors and how to get them on the link site. You should note, however, that many of these are fairly fragile patinas and may not "weather" particularly well.


Bronze Patinas

Re: Little off topic, tarnishing bronze?

#13

The Foundry

Mark Mandell - Gone Round In Jersey

that I used to use had a book several inches thick on patinas for various metals. They went out of business 20 years ago. Wish I'd had the presence of mind to glom that book (along with my rubber molds). Oh well.

Note also, Keith, that a number of the formulas are applied with a torch where you heat the metal and then brush on the chemicals; not the best option if you're looking for any kind of uniform color on a door screen.

Have fun

Re: Little off topic, tarnishing bronze?

#14

David Barnett

Oil and heat

David Barnett

On copper and bronze I rub on the thinnest coat* of peanut oil I can apply by hand or with a pad, then apply heat until it just begins to smoke, turning that deep, silky Dirk Van Erp brown. Depending on the piece, its size and shape, I'll use a bushy torch flame (even a weed torch on really large pieces of copper sheet), a heatgun or hold it over a hotplate. Several coats gives that rubbed oil patina found on A&C copper lamps, vessels and hardware, and Art Nouveau through Art Deco statuary. Rub with a lightly rouged flannel for a softer and lighter look.

A coated screen may require solvents and a fine brass brush to prep. Doesn't hurt to cold pickle it first with vinegar and salt, lemon juice or dilute citric acid. Experiment.

Finish with wax.

*Superthin coats. Just enough that you can feel there's oil on it.