Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Pocket hole jigs

Posts

Pocket hole jigs

#1

Pocket hole jigs

Doug Ridley

Anybody have any opinions on a comparison of the Kreg at $100.00 compared to the Harbor Freight at $65.00. I did note that the Kreg is plastic and the HF is steel.

Re: Pocket hole jigs

#2

Moses Yoder

Re: Pocket hole jigs

Moses Yoder

The Kreg inserts where the bit goes through are very hard steel and I think are guaranteed for life, at least they used to be. I don't have a very high opinion of anything made in China and sold by Harbor Freight in direct competition with US companies.

Re: Pocket hole jigs

#3

Re: Pocket hole jigs

Lee Schierer McKean, PA

I'm not familiar with the ones at HF, but I have a Kreg original that was die cast aluminum with steel inserts and a plastic one. None have shown any signs of wear after a couple thousand screws.

Lee

Re: Pocket hole jigs

#4

Ditto

Barry Irby

Re: Pocket hole jigs

#5

Re: Pocket hole jigs

Doug Ridley

Well I have never bought much at HF but did get a 23 guage pinner there that has worked perfectly and just wondered if anybody had any experience with their jig. I guess I'll have to run by there and look at it.

Re: Pocket hole jigs

#6

Re: Pocket hole jigs

Larry in NW OHIO

I wouldn`t put to much faith in what they, the Chinese, call hardend steel. It is to soft. It will nat last nearly as long as the Kreg. Larry